IsoLOG 3D 3D DF Tracking with Test-Signal Generator (needs key)
Attached mission uses the most simple mission for the IsoLOG 3D DF antenna tracking any signal of interest:
The second SPECTRAN V6 is used as a simple CW generator generating the testsignal for DF. You can remove it from the mission if you dont have a secon V6 at hand and select any signal within the spectrum for DF instead.
After starting the mission you should see the following screen:
USAGE: Make sure to set the CURSOR and the trigger level at the bottom histogram to/within the signal of interest. The directional arrow/line of the IsoLOG should now pin point that signal in real-time. After some time and if the direction stay stable you will also see a heat map building up.
Make sure that the trigger is working. You should see the trigger signal as a yellow/red line within the right/top waterfall view. Dont change any settings within the IsoLOG rotation speed setup since those are optimized for trigger usage.
The "Filter Direction" will help to get the directional arrow/line more stable. 5% should be a nice setting still keepeing the speed at real-time level:
