V6 ECO 200XA-6 2x 44Mhz RTBW and 3Thz option vs V6 Plus 250XA-6 120Mhz RTBW
Hi,
I am about to buy a new device and I have a question.
If I want interference monitoring, which device would be more suitable?
Config 1: V6 ECO 200XA-6 with 2x 44Mhz RTBW, WIFI6E and 3Thz Sweep - or
Config 2 : V6 Plus 250XA-6 With Wifi6E, and 120Mhz RTBW ?
Is the 3Thz sweep speed in the entire spectrum (e.g. 10Mhz-7.125Ghz) more suitable if we only observe the spectrum and do not want to record it in real time? Can I record the spectra data, for example, for later analysis? Raw data will be less necessary in my case.
In the case of the ECO model, is it possible to combine the two RX signals into one to get 88Mhz RTBW?
If I still need real-time recording later, could it be solved this way?
In the case of two receivers, I set one at the beginning of the examined area and the other at the end. -->
Ex:
Rx1: 2401Mhz - 2445Mhz
Rx2: 2445Mhz - 2489Mhz.
Sorry, I may be misunderstanding the possibility of using the two receivers. I would like to see clearly before I order the particular device. 🙂
The price is about the same for both devices.
Thx! 🙂
Yes you can combine both Rx to get 88MHz so if you dont need big bandwidth go for the ECO.
