Spectran V6 Sweep Zoom block autostart
Quote from AdminTC on 27/05/2024, 13:39Use the missions at https://v6-forum.aaronia.de/forum/forum/spectran-v6-plus-2/
We want to automate the recordings using your proposals but the Spectran V6 Sweep Zoom block does not start automatically.
Is there a possibility to start the Spectran V6 Sweep Zoom block as it works other blocks?
Could you provide a sample mission?
We attached the mission file
Our sequencer settings are the followings:
<Base GUID="cc45d28c-c94c-4500-aedb-537573ec3b6a" Factory="Factory_ControlSequencer" Name="ControlSequencer_0" Title="Control Sequencer">
<ConfigItem Name="ControlSequencer_0_config" Class="group" Type="0">
<ConfigItem Name="settings" Class="group" Type="0" Expanded="1"/>
<ConfigItem Name="main" Class="group" Type="0" Expanded="1">
<ConfigItem Name="autostart" Class="bool" Type="6" Val="1"/>
<ConfigItem Name="commands" Class="group" Type="0" Expanded="1">
<ConfigItem Name="block-start#1771377204" Class="group" Type="0" Expanded="1">
<ConfigItem Name="receivername" Class="string" Type="3" Val="Block_Spectran_V6B_0"/>
<ConfigItem Name="connectdevice" Class="bool" Type="6" Val="1"/>
<ConfigItem Name="startconnection" Class="bool" Type="6" Val="1"/>
<ConfigItem Name="startrecording" Class="bool" Type="6" Val="1"/>
</ConfigItem>
</ConfigItem>
</ConfigItem>
</ConfigItem>
<Inputs>
<Input Name="Input_ControlSequencer_0" Title="Input 1" Owner="ControlSequencer_0"/>
<Input Name="Input_ControlSequencer_1" Title="Input 2" Owner="ControlSequencer_0"/>
<Input Name="Input_ControlSequencer_2" Title="Input 3" Owner="ControlSequencer_0"/>
<Input Name="Input_ControlSequencer_3" Title="Input 4" Owner="ControlSequencer_0"/>
<Input Name="Input_ControlSequencer_4" Title="Input 5" Owner="ControlSequencer_0"/>
<Input Name="Input_ControlSequencer_5" Title="Input 6" Owner="ControlSequencer_0"/>
<Input Name="Input_ControlSequencer_6" Title="Input 7" Owner="ControlSequencer_0"/>
<Input Name="Input_ControlSequencer_7" Title="Input 8" Owner="ControlSequencer_0"/>
</Inputs>
THX in advance for a quick answer.
The topic is blocking us for further using the arronia.
Best
(pls see also the post from today here:
https://v6-forum.aaronia.de/forum/topic/spectran-v6-span-is-changing-every-start/)
In your mission the Control Sequencer is only connected to the Spectran V6 Plus block, so the start command is not received by the Spectran V6 Sweep Zoom block.
Also you specified that only the Spectran V6 should be started by the Control Sequencer ("Receiver" refers to the block that should receive the command, not the physical receiver hardware).
While starting the Sweep Zoom block will automatically send a start command to the Spectran V6, it doesn't work the other way around.
Therefore usually when using the Sweep Zoom block you should basically ignore the Spectran V6 block completely and only use the Sweep Zoom block for everything.
