GPS Offset
Quote from AdminTC on 26/07/2021, 09:03The GPS Offset block adjusts the IsoLOG 3D DF antenna position in relation to the GNSS Compass GPS readout.
Left hand side Input:
- GPS
- GNSS
Right hand side Output:
- GPS
- DDCC (Connect to DDCC block)
If setting up a test drive vehicle you need to adjust the position of the IsoLOG 3D DF antenna since it is not the same as the GNSS Compass position (which feeds the GPS position to the complete system). This is what the GPS Offset block is made for. You can add an offset of Latitude and Logitude but also Altitude and Azimuth which will offer you a perfect position setup.
The setup is quite simple and only needs the offset data in relation to the GNSS Compass unit:
A typical mission:
The GPS Offset block adjusts the IsoLOG 3D DF antenna position in relation to the GNSS Compass GPS readout.
Left hand side Input:
- GPS
- GNSS
Right hand side Output:
- GPS
- DDCC (Connect to DDCC block)
If setting up a test drive vehicle you need to adjust the position of the IsoLOG 3D DF antenna since it is not the same as the GNSS Compass position (which feeds the GPS position to the complete system). This is what the GPS Offset block is made for. You can add an offset of Latitude and Logitude but also Altitude and Azimuth which will offer you a perfect position setup.
The setup is quite simple and only needs the offset data in relation to the GNSS Compass unit:
A typical mission: