Please or Register to create posts and topics.

Changelog | Last Update: 20.01.2024

RTSA Suite PRO V2.5
26.01.2024 - v2.6.1.14699
  - fix: Potential crash in docking system related to external monitors
  - fix: SUITE-2473 Jammer Control Panel - Freq. Source Dynamic Eingang nach Reload gest├Ârt
26.01.2024 - v2.6.1.14691
  - add: 'RTSA Startup Report' dialog
25.01.2024 - v2.6.1.14684
  - fix: check if files should be split before stopping recoding based on file size limit, else the recording just stops.
24.01.2024 - v2.6.1.14677
  - add: SUITE-2464 auto stop timeout for file writer block
  - add: SUITE-2467 Add Rx selection to band sequencer
23.01.2024 - v2.6.1.14671
  - add: SUITE-2440 add time compression to directional find waterfall
20.01.2024 - v2.6.1.14660
  - add: LEDs for V6 GPS and trigger
  - add: more safety checks for jsiqa plugin
  - add: SUITE-2458 dynamic adjustment of center frequency range of R&D spectrum analyzers
19.01.2024 - v2.6.1.14655
  - fix: SUITE-2451 layout of interactive mapper
18.01.2024 - v2.6.1.14651
  - fix: SUITE-2461 restore SweepZoom defaults
17.01.2024 - v2.6.1.14647
  - add: V6 Eco status ribbon item
16.01.2024 - v2.6.1.14632
  - add: SUITE-2440 add waterfall to DF block
  - add: SUITE-2455 cloned cursor hamburger menu to context menu
  - add: SUITE-2457 IQ Output for sweep zoom block
  - fix: SUITE-2437 typo
13.01.2024 - v2.6.1.14621
  - add: SUITE-2441 connect IsoLOG DF to DDCC
  - add: SUITE-2454 add "all frequencies" checkbox to sector configuration
12.01.2024 - v2.6.1.14617
  - add: healthstatus and remote control to V6 eco
  - add: more stats for V6 eco
  - add: temperature measurement to eco
11.01.2024 - v2.6.1.14611
  - add: SUITE-2442 time shift ribbon bar
  - add: SUITE-2446 add ribbon bar to control sequencer
  - add: SUITE-2447 add remote control to sweep zoom block
  - fix: ADSB ground position decoding
10.01.2024 - v2.6.1.14605
  - add: TX ribbon for V6 eco
  - add: V6 Eco signal generator over all regions (downconverter and harmonics)
06.01.2024 - v2.6.1.14587
  - add: v6 eco power meter
21.12.2023 - v2.6.1.14548
  - add: GPS support for V6 eco
  - add: power meter enable debug option for V6Eco
  - add: v6 eco trigger input
20.12.2023 - v2.6.1.14539
  - add: dynamic fast sweep of V6 eco
  - fix: V6 eco TX init
19.12.2023 - v2.6.1.14531
  - add: HighPower SP8T switch
  - add: SUITE-2438 lock position to geo scale config
  - add: sweep cross 6GHz
15.12.2023 - v2.6.1.14519
  - add: HighPower SP8T switch
  - add: HighPower SP8T switch - block skeleton
  - add: HighPower SP8T switch - block skeleton
  - fix: add size to forward declared enum, should fix linux build
  - fix: another attempt to make the linux compiler happy
  - fix: linux build
14.12.2023 - v2.6.1.14510
  - add: wide spectrum harmonics detector
13.12.2023 - v2.6.1.14505
  - add: prepare V6 eco production version
  - fix: change init of arm system state fo fix linux build
  - fix: eco tx amp setting
08.12.2023 - v2.6.1.14488
  - add: dual channel support for service api
  - fix: incomplete remove of variable in client lib test
06.12.2023 - v2.6.1.14474
  - add: error count for V6 JESD test patterns
06.12.2023 - v2.6.1.14470
  - add: auto start and stop of service exe
  - add: interleaved RX1/RX2 for service api
  - add: SUITE-2426 interleaved RX1/2 IQ transfer for V6
  - fix: complex exp and log in jsiqa
30.11.2023 - v2.6.1.14436
  - add: binary mode transfer for service api tx stream
29.11.2023 - v2.6.1.14426
  - fix: RTSA File Format Documentation: Rice Code/Bit Packing table typo
24.11.2023 - v2.6.1.14403
  - add: TX mode for service manager API
23.11.2023 - v2.6.1.14400
  - Fix: ROC Discovery without DNS Server (SF)
22.11.2023 - v2.6.1.14396
  - fix: SUITE-2352 V6 POWR button inside ribbon bar shows wrong state
  - fix: SUITE-2416 update chopper time in iso log if not running
21.11.2023 - v2.6.1.14387
  - add: developer feature flag in IQ symbol decoder
  - add: map for IQ symbol decoder to enable disjunct decoder keys
18.11.2023 - v2.6.1.14369
  - add: HAROGIC API project files
  - add: HAROGIC API project files
  - add: power loggint to V6 eco for testing
  - fix: V6 eco dual rx single lo mode streaming
16.11.2023 - v2.6.1.14352
  - add: V6 tx modes
09.11.2023 - v2.6.1.14306
  - add: SUITE-2429 start and stop frequency on x axis
08.11.2023 - v2.6.1.14302
  - fix: non PBO usage of IQ buffers
08.11.2023 - v2.6.1.14296
  - add: random step mode in signal generators
07.11.2023 - v2.6.1.14289
  - add: SUIITE-2430 spurious and image cancel by multiple sweep phases
  - fix: crash in histogram block, when upsampling a single bin spectrum
04.11.2023 - v2.6.1.14267
  - add: SUITE-2366: "Open Drone ID -BT LE Beacon Symbols
  - add: SUITE-2428 lock direction checkbox in http sector jammer
  - fix: SUITE-2423 eidting of custom maps
  - fix: SUITE-2427 placement of X axis in histogram view
03.11.2023 - v2.6.1.14256
  - add: BT LE ADV Types
  - add: crc cache for BT LE LR
  - Bugfix: Missing tr_declaration
  - fix: bt le sync detector
  - fix: crash in BTLE decoder
  - fix: crash in DQPSK decoder
02.11.2023 - v2.6.1.14245
  - add: SUITE-2366: RemoteID Decoder Block (nightly)
01.11.2023 - v2.6.1.14235
  - add: coded BT LE PHY S8 mode
  - add: SUITE-2366: "Open Drone ID -802.11 Beacon Message Types: BASIC_ID/Serial
  - add: SUITE-2366: "Open Drone ID -802.11 Beacon Message Types: PACKED, SYSTEM, LOCATION, OPERATOR_ID:
  - add: SUITE-2366: "Open Drone ID -802.11 Beacon MessagePack parser, Operator ID Type
  - add: SUITE-2366: "Open Drone ID -802.11 Beacon Symbols: Deserializer friendly symbol names
  - add: SUITE-2366: "Open Drone ID -802.11 Beacon Symbols: Deserializer friendly symbol names
31.10.2023 - v2.6.1.14227
  - add: SUITE-2366: "Open Drone ID -802.11 Beacon MessagePack parser
  - add: SUITE-2366: Identify "Open Drone ID - Message Pack" in 802.11 Beacon symbols for OUI: Asd-Stan, F4311-20 (DJI)
26.10.2023 - v2.6.1.14199
  - add: device modes for V6 eco
  - fix: crash in direction block when antenna == nullptr
24.10.2023 - v2.6.1.14189
  - add: frequency profile to IQ pulse inspector
23.10.2023 - v2.4.2.14177
  - add: symbol decode for 802.11 management type 0x4, probe request
22.10.2023 - v2.4.2.14174
  - add: device explorer block: first attempt to import signal event streams to visualize 802.11 Management Beacons in realtime
  - add: device explorer block: first attempt to import signal event streams to visualize 802.11 Management Beacons in realtime.
  - add: device explorer block: first attempt to import signal event streams to visualize 802.11 Management Beacons in realtime.
20.10.2023 - v2.4.2.14137
  - add: server process based client dll
18.10.2023 - v2.4.2.14123
  - add: RTSA service process
  - add: SUITE-2420 auto adjust chopper time based on FFT and V6 sample rate
  - fix: linux build
16.10.2023 - (Jakob)
  - add: implement ISOLog Bootloader protocol
14.10.2023 - v2.4.2.14106
  - add: update cable calibration data and add calibration files for more amplifiers
12.10.2023 - v2.4.2.14098
  - add: calibration data for IsoLOG 9060 PRO
  - fix: crash when misconfiguring channel power block
11.10.2023 - v2.4.2.14094
  - add: calibration data for IsoLOG 9030 PRO
10.10.2023 - v2.4.2.14089
  - fix: add updated keys package
06.10.2023 - v2.4.2.14073
  - fix: crash with http streaming with invalid chunk header caused by network errors
05.10.2023 - v2.4.2.14070
  - fix: SUITE-2379 reduce system load for large memory allocations by using virtual alloc on windows to allocate on page level
03.10.2023 - v2.4.2.14063
  - fix: SUITE-2385 extend receiver band sequencer frequency range in available to 18GHz
29.09.2023 - v2.4.0.14039
  - fix: SUITE-2388 reload of exported rtsa file from filesource
28.09.2023 - v2.4.0.14032
  - fix: SUITE-2397 don't create a heading for out of range drone spotters
27.09.2023 - v2.4.0.14028
  - fix: center lower bound in V6 ECO for small spans
26.09.2023 - v2.4.0.14017
  - fix: ECO V6 filter
26.09.2023 - v2.4.0.14004
  - fix: Fixed shifting error in signalevent explorer
25.09.2023 - v2.4.0.14001
  - fix: memory leak in signal event writer
  - fix: remove debug output
22.09.2023 - v2.4.0.13985
  - add: auto recover for FX3 firmware upload errors
  - fix: add updateTime field description to antenna data structure in JSON documentation
  - fix: improve stability of IQ symbol decoder
22.09.2023 - v2.4.0.13969
  - add: SUITE-2336 subspans for waterfall and histogram
  - add: waterfall of events in signal event recorder
19.09.2023 - v2.4.0.13955
  - add: auto compression for signal event writer
16.09.2023 - v2.4.0.13946
  - fix: SUITE-2402 mishandling of time discontinuity in IQ power spectrum
15.09.2023 - v2.4.0.13942
  - fix: SUITE-2390 time shift block can't display spectra > 32k
  - fix: SUITE-2395 file index problem in file set reader
13.09.2023 - v2.4.0.13931
  - add: drone location shifter package
08.09.2023 - v2.3.0.13914
  - add: OcuSync decoder for new Mavic Air 3
07.09.2023 - v2.2.6.13904
  - add: sender, receiver and conversation ID to IQ signal event explorer
  - fix: auto adjust waterfall height when replaying from signal event IQ explorer
06.09.2023 - v2.2.6.13899
  - fix: warning for const float overflow
06.09.2023 - v2.2.6.13895
  - fix: crash in iq signalevent explorers with screen wider than 4k
05.09.2023 - v2.2.6.13880
  - add: implement 2MHz bluetooth LE
03.09.2023 - v2.2.6.13868
  - add: database access for signal event explorer
  - add: IQ signal event explorer position indicator in histogram views when selecting row in table
01.09.2023 - v2.2.6.13847
  - fix: signalEventDatabaseWriter: UI connect/disconnect signals
01.09.2023 - v2.2.6.13834
  - add: V6 eco tx mode
01.09.2023 - v2.2.6.13824
  - add: new DSP Scheduler Mode "CUSTOM" app config. (Custom CPU core order and assignment)^
  - add: new V6eco firmware and FBGA bitstreaming support balanced duplex streaming
  - add: thread to signal event explorer datacube
  - add: tracking calibration config to V6
  - fix: windows build
31.08.2023 - v2.2.6.13808
  - add: bidirectional Tx test for eco
31.08.2023 - v2.2.6.13805
  - add: disable FPGA version check dialog in V6
30.08.2023 - v2.2.6.13798
  - add: signal event explorer
  - fix: signaleventdatabasewriter: stop thread in ~ctor
  - fix: std::min args
  - fix: typo in signaleventdatabasewriter field uuid
29.08.2023 - v2.2.6.13785
  - add: delta frequency to IQ oscilloscope
  - fix: memory leak in singal event writer
27.08.2023 - v2.2.6.13765
  - add: support for compressed USB streams Rx/Tx V6 Eco
27.08.2023 - v2.2.6.13760
  - add: check for performance cores in dsp scheduler
25.08.2023 - v2.2.6.13748
  - add: body compression for http block requests/response
  - add: JSON output for signal event writer
24.08.2023 - v2.2.6.13718
  - add: IQ generic DSSS decoder
  - fix: Jammer Power Control port range from 0-11
  - fix: SUITE-2381 Blockgraph editor wrong dimensians when "Lock Size" in Combination with Position "Top/Bottom"
  - fix: time check in HTTP client/server
23.08.2023 - v2.2.6.13705
  - add: IQ sweep scheduler
  - Fix: Crash when closing ProgressDialog
23.08.2023 - v2.2.6.13698
  - fix: span border preview of IQ data in file blocks
23.08.2023 - v2.2.5.13693
  - add: V6 eco notch filter
23.08.2023 - v2.2.5.13690
  - add: auto reference level button to V6
  - fix: Test V6 Device Dialog can't be closed
18.08.2023 - v2.2.4.13654
  - add: more stats for V6 ECO TX
17.08.2023 - v2.2.4.13649
  - add: allow clearing data of script chart objects
16.08.2023 - v2.2.4.13646
  - add: SUITE-2376 separate keys for low frequency V6 modes
  - add: V6 Eco SW signal generator
  - fix: Receiver block sequencer 2.5 is not compatible with RTSA 2.2
  - fix: SUITE-2376 missing maintainance case for frequencies
14.08.2023 - v2.2.4.13638
  - fix: IQ stream end flags with chopper mode
11.08.2023 - v2.2.4.13628
  - add: error message on disk full in time shift save
  - add: Turntable control block
  - fix: SUITE-2226   Time Shift block - check disk space before safe
09.08.2023 - v2.2.4.13621
  - add: first shot V6 ECO Tx Mode
  - fix: prevent V6 ECO boot EEPROM from being written
09.08.2023 - v2.2.4.13615
  - fix: SUITE-2287 Multi spectrum frequency profile propagation
  - fix: SUITE-2369 position information not propagated with drone ID decoders
08.08.2023 - v2.2.4.13600
  - add: SUITE-2293 add IsoLOG simulator block
  - add: SUITE-2368 Dynamic configuration of outputs in receiver band sequencer
  - fix: crash when attempting FPGA update with failing main USB V6 connection
05.08.2023 - v2.2.4.13591
  - fix: overflow in IQ WiFi interaction chart
  - fix: SUITE-2339 new FPGA version for V6 fixed 122.88 FFT mode
31.07.2023 - v2.2.4.13569
  - add: antenna position in signal generator
  - fix: SUITE-2365 drone spotter enable flag not propagated
29.07.2023 - v2.2.4.13550
  - fix: crash with V6 antenna changes
  - fix: SUITE-2322 Highlight block inside Blockgraph Editor for better overview
  - fix: SUITE-2362 V6 Position update external
28.07.2023 - v2.2.4.13533
  - add: SUITE-2332 Mark signals of interest as drone
  - fix: SUITE-2208 New Feature pop-up Info
27.07.2023 - v2.2.4.13527
  - fix: SUITE-2364 direction waterfall azimuth out of synch on high CPU load
26.07.2023 - v2.2.4.13521
  - fix: change baseAzimuth type to radians in DDS documentation
21.07.2023 - v2.2.4.13508
  - add: manual drone detection DSP block
  - add: SUITE-2325 IsoLOG default IP in combo box
  - add: SUITE-2329: "Mavic 3 Classic"
  - add: SUITE-2360 propagate elevation in DDS Observer
  - fix: bottom separator in waterfall time axis
  - fix: SUITE-2360 mark elevation in V6 GPS data as valid
20.07.2023 - v2.2.4.13498
  - add: SUITE-2307. DroneID for DJI Mavic 3 Enterprise
  - add: watchdog to FX3 service firmware
  - fix: FFT setting in DJI Drone ID decoder
  - fix: spindletrace end of line errors
  - fix: SUITE-2353 script block not starting
19.07.2023 - v2.2.4.13489
  - add: sliders to video FFT filter frequency ranges
  - fix: device change procedure during V6 FPGA update with non boot firmware devices
  - fix: offset in 5x5 image convolution filter
  - fix: offset in 5x5 video convolution
  - fix: Redraw glitch when changing the RTSA stylesheet
  - fix: SUITE-2352   V6 POWR button inside ribbon bar shows wrong state
18.07.2023 - v2.2.4.13478
  - add: block tooltip for spectra condition block
15.07.2023 - v2.2.4.13471
  - fix: vertical graph compacting
14.07.2023 - v2.2.4.13467
  - add: reomte config items for "IQ Modulator" block
14.07.2023 - v2.2.4.13464
  - add: reomte config items for "Network Reader" block
  - fix: Crash when dropping an empty mission file onto the app
14.07.2023 - v2.2.4.13460
  - fix: SUITE-2348 rtsa key files not deleted on V6 if deleted on system
12.07.2023 - v2.2.4.13451
  - add: export of sample data from stream debug block
  - fix: block graph layout new columns placement
  - fix: block graph layouter when dragging in new blocks
  - fix: JCP sector assignment on multiple remote sectors
11.07.2023 - v2.2.4.13389
  - fix: SUITE-2305 blockgraph block size of connectors change
  - fix: TX signal in pattern mode generted outside of valid frequency range
10.07.2023 - v2.2.4.13381
  - fix: SUITE-2338, missing dependency
08.07.2023 - v2.2.4.13374
  - add: debug reset FFT button for V6
  - fix: crash in V6 streamer on buffer count change
  - fix: USB firmware reload on multi V6 systems
07.07.2023 - v2.2.4.13369
  - add: New frequency profile for WiFi7
05.07.2023 - v2.2.4.13352
  - fix: graph connection layout
04.07.2023 - v2.2.4.13344
  - add: stub for move block in graph editor
  - fix: graphlayout incremental update
03.07.2023 - v2.2.4.13334
  - fix: notch in group layouter
02.07.2023 - v2.2.4.13331
  - add: some block factory tooltips
01.07.2023 - v2.2.4.13325
  - fix: blocking of FPGA FIFO with RX1/RX2 mode in V6
30.06.2023 - v2.2.4.13322
  - fix: Y range cursor in file reader range selection
29.06.2023 - v2.2.4.13318
  - add: new FPGA for lower base frequencies
29.06.2023 - v2.2.4.13313
  - fix: layout of fake blocks
  - fix: power level auto adjust in FLARM decoder
24.06.2023 - v2.2.4.13299
  - add: SUITE-2330 file and path widgets in scripts
22.06.2023 - v2.2.4.13292
  - add: color controil for direction spectrum histogram radar grid
  - add: SUITE-2311 add multi input mode to multi spectrum zoom
  - fix: azimuth data block lookup in direction waterfall
  - fix: spectrum sweep stop in ECO when changing reference level
21.06.2023 - v2.2.4.13284
  - add: setReadChannel for JSIQA process interface to access stderr
21.06.2023 - v2.2.4.13276
  - add: support for neural nets with 8 segments in directional find
20.06.2023 - v2.2.0.13248
  - add: frequency based neural network for direction find
16.06.2023 - v2.2.0.13228
  - fix: color palette in german language mode caused crash
15.06.2023 - v2.2.0.13212
  - fix: V6 Eco startup
14.06.2023 - v2.2.0.13208
  - fix: Power down FPGA on V6 initFPGA() to ensure consistend state on GNU Linux.
13.06.2023 - v2.2.0.13203
  - add: "Patent pending" mark to directional blocks
  - add: SUITE-2319 audio device selection in audio monitor
  - fix: audio block stream overflow issues
13.06.2023 - v2.2.0.13197
  - add: neural network to direction block
10.06.2023 - v2.2.0.13187
  - fix: SUITE-2320 direction waterfall wrong orientation
06.06.2023 - v2.2.0.13149
  - fix: wakeup signal in V6 tx stream path
03.06.2023 - v2.2.0.13138
  - add: map view to IQ direction spectrum block
02.06.2023 - v2.2.0.13132
  - add: tx calibration control for eco
  - fix: SUITE-2314 Rearranging (F5) inside BlockGraph Editor changes the look of the mission all the time
01.06.2023 - v2.2.0.13127
  - add: presets and ribbon to remote config block
27.05.2023 - v2.2.0.13111
  - add: new FPGA code for 46.08MHz IQ rate
26.05.2023 - v2.2.0.13106
  - add: 46.08 mode in V6
26.05.2023 - v2.2.0.13102
  - fix: clock rate divide in V6
26.05.2023 - v2.2.0.13098
  - add: high-speed SP4T: minimal working impl
25.05.2023 - v2.2.0.13089
  - add: frequency axis to direction spectrum histogram map
  - add: SUITE-2291 serial number in sub stream
  - add: SUITE-2305 outputs in multi spectrum zoom
  - fix: crash when trying to set a Tx discontinuity that does not exist in V6 calibration data
25.05.2023 - v2.2.0.13081
  - add: High-Speed SP4T switch: block sceleton for jammer remote config
  - add: high-speed SP4T: minimal working impl
  - add: high-speed SP4T: minimal working impl
  - add: high-speed SP4T: minimal working impl
  - add: high-speed SP4T: minimal working impl
  - add: high-speed SP4T: minimal working impl: request status updates
23.05.2023 - v2.2.0.13064
  - add: map overlay for direction spectrum histogram
18.05.2023 - v2.2.0.13052
  - add: flipped direction image in direction spectrum histogram
17.05.2023 - v2.2.0.13049
  - add: file set reader block
16.05.2023 - v2.2.0.13045
  - fix: event substream in IQ symbol decoder selection
13.05.2023 - v2.2.0.13035
  - add: TX pattern generator for V6 Eco
  - add: version check for V6 Eco FPGA
11.05.2023 - v2.2.0.13016
  - add: WIP sceleton jammer power control
  - add:jammer power control: watchdog health status message
  - add:jammer power control: watchdog timer for DI monitoring
10.05.2023 - v2.2.0.13010
  - add: WIP sceleton jammer power control
  - add: WIP sceleton jammer power control
  - add: WIP sceleton jammer power control
  - fix: status list re-layout on font change
05.05.2023 - v2.2.0.12993
  - add: color wheel around directional waterfall map display
  - fix: directional block with single plane IsoLOG
02.05.2023 - v2.2.0.12980
  - add: sendTo to js udp
01.05.2023 - v2.2.0.12975
  - add: New block IP Writer
30.04.2023 - v2.2.0.12971
  - add: IP Reader block
29.04.2023 - v2.2.0.12965
  - add: directional waterfall overlay for directional and pulsed directional waterfall
  - add: more decoration for direcational waterfall blocks
  - fix: V6 calibration parser
29.04.2023 - v2.2.0.12957
  - add: Direction pulsed waterfall
  - add: support for http sample post without timestamp
  - fix: waterfall profile display with no data
28.04.2023 - v2.2.0.12946
  - add: signalEventDatabaseWriter: AntennaUUID now fixed, Decoder raw result now persisted.
  - fix: directioanl histogram flip azimuth
27.04.2023 - v2.2.0.12936
  - add: DC correction to IQ directional spectrum block
  - add: IQ Spectrum Spreader block
  - add: V6 eco tx fpga info
27.04.2023 - v2.2.0.12923
  - add: path config IQ signal event writer
26.04.2023 - v2.2.0.12920
  - add: show azimuth on direction waterfall
  - add: signal event IQ file writer block
  - fix: assert when creating script view item without name
  - fix: cursor flip in direction histogram
25.04.2023 - v2.2.0.12902
  - add: direction spectrum histogram block
25.04.2023 - v2.2.0.12896
  - add: BlockImage for IQSignalClassifier
  - add: DecoderSignalEvent database writer
  - fix: eco tx pattern gen
24.04.2023 - v2.2.0.12878
  - add: DecoderSignalEvent database writer
23.04.2023 - v2.2.0.12875
  - fix: sweep with chopper mode
22.04.2023 - v2.2.0.12870
  - add: circular dependency check for graph layouter
  - add: frequency profile to channel power block
  - add: reference offset display to markers
  - fix: Adjust AD223 profile so channels start on channel number [MP]
  - fix: overflow in trace with very large textures and odd divisors
  - fix: SUITE-2283 adjust dB scaling on log freq in spectrum view
21.04.2023 - v2.2.0.12857
  - add: LicenseKey for IQ Signal Classifier
  - fix: band marker values
20.04.2023 - v2.2.0.12852
  - add: initial sceleton block for SignalEventDatabase writer
  - add: prepare graph layout columns for group display
  - fix: RBW mode causes offset in FFT block for FFTs > 500k
  - fix: scaling of log scaled FFT with RBW mode
20.04.2023 - v2.2.0.12843
  - add:chopper sweep support
  - fix: assert to strict in meta file reader
  - fix: show Alert HTTP body config field for put instead of post data
  - fix: SUITE-2278 period buffer exceeds max texture size
19.04.2023 - v2.2.0.12830
  - add: sample frequency to HTTP json header
19.04.2023 - v2.2.0.12827
  - add: directional waterfall block
16.04.2023 - v2.2.0.12816
  - add: New development block DummyPlug
15.04.2023 - v2.2.0.12811
  - fix: crash with zero size blocks in waterfall
14.04.2023 - v2.2.0.12807
  - add: support for pattern buffer in V6 ECO
13.04.2023 - v2.2.0.12801
  - Add: Anritsu 68C Signal Generator package (SF)
  - Add: Generic SCPI Client block script to factory cdata (SF)
  - Add: HP8360 Signal Generator package (SF)
  - Add: SMJ100A Signal Generator package (SF)
  - Fix: missing includepath
12.04.2023 - v2.2.0.12796
  - add: SUITE-2237 merge antenna segments in IQ directional power block
  - fix: SUITE-2269 azimuth in debug block
07.04.2023 - v2.2.0.12778
  - add: prepare eco pattern generator
04.04.2023 - v2.2.0.12770
  - fix: racing condition in file writer close
  - fix: SUITE-2272 - DJI Drone Decoder shows only Longitude and Height for Remote
01.04.2023 - v2.2.0.12762
  - fix: some Cell Geo Db structures were not correctly working with MSVC due to alignment/size differences to GCC
31.03.2023 - v2.2.0.12756
  - Add: Read operation to JSIQA SCPI client (SF)
  - Add: ViClear() to IVI Visa Plugin (SF)
  - Fix: Disconnect state of JSIQA SCPI client (SF)
  - Fix: IVI Visa Plugin Crash (SF)
29.03.2023 - v2.2.0.12734
  - fix:  USB_RFSP4T_Switch::Get_SP4T_State eval rx register.
  - fix: blocking after fast sweep with ECO
  - fix: Logic error in previous change caused the installer to miss all but the binaries
28.03.2023 - v2.2.0.12729
  - add: FPGA Eco for faster spi
  - fix: disable calibration of RX2 on single channel boards
26.03.2023 - v2.2.0.12717
  - add: fpga sweep for spectran v6 eco
25.03.2023 - v2.2.0.12712
  - add: V6 eco auto sweep hop
24.03.2023 - v2.2.0.12708
  - add: antenna segment forwarding to spectra binary block
  - fix: V6 early termination
22.03.2023 - v2.2.0.12701
  - add: new Eco sweep FPGA registers
  - add: test code for FPGA sweep
  - fix: SUITE-2265 array unshift did not update number of contiguous keys counter
21.03.2023 - v2.2.0.12696
  - fix: JSIQA Interpreter setTimeInMilliconds
  - fix: SUITE-2262 display unit for secondary trace in spectrum block
  - fix: V6 Eco Schnitzel attenuator settings
17.03.2023 - v2.2.0.12685
  - add: V6 Eco Tx test configuration
17.03.2023 - v2.2.0.12679
  - add: Eco Tx test code
  - fix: segment start/end in spectrum time erosion block
16.03.2023 - v2.2.0.12674
  - add: HW assisted sweep for V6 Eco and lo harmonics
  - fix: V6 eco frequency range in sweep
16.03.2023 - v2.2.0.12670
  - add: FreqProfile for AD233_900MHz
15.03.2023 - v2.2.0.12667
  - Add: Documentation Source (HISLIP-SCPI Server) (SF)
  - Fix: Heavy memory usage for high datarates  (HISLIP-SCPI Server) (SF)
  - Fix: Linux runtime (HISLIP-SCPI Server) (SF)
  - Fix: Sharp in cryptic names for dynamic submenu in config tree (HISLIP-SCPI Server) (SF)
  - fix: SUITE-2250 crash in IQ Direction Power Spectrum when chaning strream config results in a zero sample packet
14.03.2023 - v2.2.0.12661
  - add: connecting OR remote detector
14.03.2023 - v2.2.0.12657
  - fix: SUITE-2227 IQ WiFi interaction mapper stops charting after ~2 minutes
  - fix: SUITE-2234 import traces with non trivial units
  - fix: SUITE-2248 adapt block names while loading block configuration
11.03.2023 - v2.2.0.12648
  - add: SUITE-2236 side graphs for IQ direction power spectrum
  - fix: SUITE-2240 limits of subspans
10.03.2023 - v2.2.0.12644
  - add: V6 eco model detection
09.03.2023 - v2.2.0.12639
  - fix: Fixed problem with hidden attribute of rootConfigItem
  - fix: SUITE-2235 double click causes video to jump even when over button in monitor
08.03.2023 - v2.2.0.12635
  - add: discontinuities/second chart to file writer block
07.03.2023 - v2.2.0.12629
  - fix: SUITE-2231 ADSB not working
03.03.2023 - v2.2.0.12619
  - fix: IQ interaction mapper for 811b networks
02.03.2023 - v2.2.0.12615
  - add: access to external script files in release build
  - add: prepare for headless linux deployment: new ifw pkg version 4.5.1
  - fix: DSP stream processor workspace size calculation in ludicrous mode
28.02.2023 - v2.2.0.12598
  - add: frequency correction for simple IQ decoders
  - fix: startup problem with script blocks
28.02.2023 - v2.2.0.12594
  - fix: placement of markers in wrapped spectrum
27.02.2023 - v2.2.0.12591
  - fix: new FPGA V6 firmware fixes 250MHz hardware FFT
27.02.2023 - v2.2.0.12587
  - fix: Startup error in Script Interpreter
  - fix: SUITE-2229 No display of map data from RTSA 12531 and following
26.02.2023 - v2.2.0.12576
  - fix: Linux build: LDPCDecoder::begin: qMax param 0LL -> 0L
  - fix: Windows build: LDPCDecoder::begin: qMax param 0L -> ptrdiff_t typedef
25.02.2023 - v2.2.0.12569
  - add: more WiFi N decoding for Parrot drones
23.02.2023 - v2.2.0.12552
  - add: DJI new frame header type 0x54 -> Phantom 4 RTK + fallback to "DJI generic drone", if drone model could not be found in our local dataset
23.02.2023 - v2.2.0.12549
  - fix: Text layout problem in Ribbon Integer and Float controls
21.02.2023 - v2.2.0.12531
  - add: SUITE-2225 Offline Map with custom URL
16.02.2023 - v2.2.0.12513
  - add: calibration data for new OmniLOG antennas
  - add: export of data table view
15.02.2023 - v2.2.0.12508
  - fix: set Tx thread to avoid throttle in windows
11.02.2023 - v2.2.0.12497
  - add: frequency range to IQ OR decoder
10.02.2023 - v2.2.0.12492
  - add: variance based chopper sector detector
10.02.2023 - v2.2.0.12489
  - fix: phase correction in IQ normalization and fast IQ normalization blocks
09.02.2023 - v2.2.0.12484
  - add: 76kHz decoding for IQ OR drone detector
09.02.2023 - v2.2.0.12478
  - Fix: SUITE-2220 IVI Foundation VISA package: missing DLL
08.02.2023 - v2.2.0.12473
  - add: offet log scaling for IQ FFT
07.02.2023 - v2.2.0.12470
  - add: async wakeup call to DSP blocks that have data and space but are not marked ready
  - Add: Extended Color Palette to 3D Charts (SF)
  - Add: Extended Color Palette to IQ charts (SF)
  - Add: Extended Color Palette to spectrum charts (SF)
  - fix: adapt center log scale in IQ power conversion block for larger FFT sizes
  - fix: potential lockup in IQ decoder for QPSK and GFSK for zero symbol blocks
04.02.2023 - v2.2.0.12454
  - add: SUITE-2216 Occusync detection for Phantom 4 RTK in spectra
  - fix: SUITE-2156, SUITE-2121 DJI Drone ID decoder position update
03.02.2023 - v2.2.0.12449
  - fix: add missing block from V6 Eco load stats
  - fix: ignore 76kHz in IQ OR detector
  - fix: lockup of QAM16 IQ decoder autodetect
  - fix: windows size calculation in software DC correction with small spans
02.02.2023 - v2.2.0.12440
  - fix: V6 ECO partial span with harmonics LO
01.02.2023 - v2.2.0.12431
  - fix: disable dump file in IQ OR detector block
31.01.2023 - v2.2.0.12427
  - add: IQ OR Drone Detector
  - add: more harmonics for eco
30.01.2023 - v2.2.0.12423
  - add: OCXO support for V6 Eco
  - Fix: Suite-1214 different size of Color Palette (SF)
30.01.2023 - v2.2.0.12418
  - fix: License Manager Dialog was shown on every startup
28.01.2023 - v2.2.0.12411
  - fix: Crash in string edit control when using Undo / Redo
  - Fix: Suite-871  inconsistent naming of Color Palette (SF)
27.01.2023 - v2.2.0.12405
  - fix: SUITE-2215 Update oder Installation einer RTSA generiert keinen Desktop Shortcut
24.01.2023 - v2.2.0.12398
  - Add: Extended Color Palette to spectrum waterfall chart (SF)
  - Add: Hide single Icons in submenu of quickmenu (SF)
  - fix: saving IQ file from timeshift operator was corrupted with IsoLOG rotation, file compression and small span size
21.01.2023 - v2.2.0.12387
  - fix: SUITE-2211 Package Shop: "Install RTSA package" will use online package
20.01.2023 - v2.2.0.12382
  - fix: Show enum titles instead of values in Ribbonbar list widgets
19.01.2023 - v2.2.0.12379
  - add: pdn for quick icon menu
  - fix: SUITE-2203 splitter in nested layouts
17.01.2023 - v2.2.0.12370
  - add: workaround for missing antenna information in video stream
17.01.2023 - v2.2.0.12364
  - fix: Jammer Control broadcast config
16.01.2023 - v2.2.0.12361
  - add: calibration data for IsoLOG 3D Mobile 9080 PRO
  - fix: Crash in Frequency Profile Dialog when using the multi-select feature
  - fix: crash in V6 when switching Tx mode while sweep generator is running
  - fix: SUITE-2205 export data from waterfall while running
12.01.2023 - v2.2.0.12329
  - add: attn/amp info in V6 eco display
  - add: center frequency range setting for V6 eco
  - fix: crash in marker table when deleting reference marker
11.01.2023 - v2.2.0.12321
  - fix: software sweep with V6 eco
11.01.2023 - v2.2.0.12318
  - add: LO harmonics support in V6Eco
10.01.2023 - v2.2.0.12315
  - add: new configuration data for 26GHz upconverter
  - add: V6 on the fly reference level update
  - fix: crash in recorded drone tracking files with missing detector types
24.12.2022 - v2.2.0.12265
  - fix: display enum titles in JSIQA list widgets
  - fix: half span with upconverter in V6 eco
  - fix: SUITE-2190 fixed workaround for mussing start time in detection data from detector block, if file played with emulate realtime
  - fix: SUITE-2193 ignore time stamps in V6 Tx when replaying file, restore file reader emulate realtime checkbox default to false
23.12.2022 - v2.2.0.12256
  - add: SUITE-2192 add min and max span for sub ranges in spectra
  - add: SUITE-2194 add elevation lookup for JSIQA in "geo.js"
21.12.2022 - v2.2.0.12242
  - add: SUITE-2131 add generic FFT
  - add: V6 eco amplifier
  - fix: ECO prevent accidental eeprom corruption in FW
  - fix: reset of V6 eco eeprom
  - fix: SUITE-2185 fix JSIQ table focus on selected row when changing cells
  - fix: SUITE-2187 fix continue in JSIQA for loop with simple counter increment
17.12.2022 - v2.2.0.12225
  - add: YUNEEC SR10, ST10 & ST16 to drones.xml
  - fix: SUITE-2186 Any tab should be closed by clicking middle mouse button
16.12.2022 - v2.2.0.12220
  - add: chirp generator for V6 pattern generator
  - fix: Improve LTE Icons
  - fix: SUITE-2184 file source not working with structured data
15.12.2022 - v2.2.0.12215
  - fix: fixed a nasty bug, that randomly caused the mouse-grab not being released when using the QuickMenu file selector
14.12.2022 - v2.2.0.12201
  - add: LTE Scanner and Decoder icons
  - fix: SUITE-2175 receiver band sequencer memory issues
10.12.2022 - v2.2.0.12184
  - fix: SUITE-2166 fixed timing issue, may causing weak display in codition block with slow updating streams
08.12.2022 - v2.2.0.12177
  - fix: V6 eco sweep across 300Mhz boundary
07.12.2022 - v2.2.0.12171
  - add: API: "Rx1 & RX2 input power dB" for API device health status
  - fix: features preamp check in V6
  - fix: memory leaks in drone tracking block
  - fix: protect video monitor blocks from connecting wrong input type
06.12.2022 - v2.2.0.12160
  - fix: SUITE-2157 IsoLOG directional find, missing declination
  - fix: V6 Eco lower bound in sweep mode to 0MHz
03.12.2022 - v2.2.0.12149
  - fix: crash in JSIQA http request when response completes with empty buffer before requesting the head
02.12.2022 - v2.2.0.12146
  - fix: initially hide sub span outputs in spectrum blocks
30.11.2022 - v2.2.0.12135
  - add: context menu for sub spans
  - add: offset operation documentation
  - add: sub spans to wrapped spectrum block
  - add: SUITE-2146 Add drag and drop of frequency sub span riders in spectrum and wrapped spectrum
  - fix: improve stability of high prec FFT on frequency change
29.11.2022 - v2.2.0.12128
  - add: stream ID to script stream packet
  - add: SUITE-2146 Sub spans for spectrum block
  - Bugfix: Missing Large Icon
25.11.2022 - v2.2.0.12110
  - add: lock target frequency to IQ demodulator block
  - add: New block "IQ Demodulator Offset Tuner"
25.11.2022 - v2.2.0.12103
  - fix: attenuator setting in V6 eco
  - fix: drone video pattern decoding broken when switching frequency range
24.11.2022 - v2.2.0.12098
  - add: upconverter sweep in V6 eco
23.11.2022 - v2.2.0.12091
  - add: HW supported sweep for V6 eco
  - Bugfix: use already existing category for "big Target"
  - fix: Yuneec DroneID Decoder local package
19.11.2022 - v2.2.0.12069
  - fix: openssl lib symlinks
18.11.2022 - v2.2.0.12064
  - fix: large memory page allocation for V6 to workaround USB driver DMA error
18.11.2022 - v2.2.0.12061
  - add: span divider for V6 eco
  - fix: Linux API Installer destination path for .so file
  - fix: memory leak in JSIQA http request
17.11.2022 - v2.2.0.12053
  - add: AaroniaRTSA API - Initial Linux build
  - add: AaroniaRTSA API - Initial Linux build
  - fix: linux: disabled nasty USB debug output
  - fix: SUITE-2139 discontinuities in IQ stream timing for span/512 in V6
16.11.2022 - v2.2.0.12036
  - add: AaroniaRTSA API - Initial Linux build
  - add: AaroniaRTSA API - Initial Linux build
  - add: AaroniaRTSA API - Initial Linux build
  - add: AaroniaRTSA API - Initial Linux build
  - fix: improve V6 eco sweep start
15.11.2022 - v2.2.0.12027
  - fix: Add Icon to EVM Measurement block
  - fix: SUITE-2106  "Technical Help" always wants to (re)install Help package.
  - fix: SUITE-2138   E-mail address from configuration not remember at the crash report.
  - fix: V6 Eco low frequency startup
15.11.2022 - v2.2.0.12016
  - add: EVM Measurement (SUITE-2101)
  - add: implement V6 Eco upconverter
  - fix: ConfigItemDialog could be moved behind the main window
  - fix: EVM Measurement flush handling
14.11.2022 - v2.2.0.12002
  - add: dynamic USB buffer size for V6 Rx stream
  - add: power correction for downconvertor block
11.11.2022 - v2.2.0.11987
  - fix: replay mode in IQ WiFi drone detector
10.11.2022 - v2.2.0.11977
  - add: RFFPGA programming with V6Eco
10.11.2022 - v2.2.0.11972
  - add: folder for module "Semaphore" - "Semaphore.js" deleted in "script" folder.
  - add: Image for block.
10.11.2022 - v2.2.0.11962
  - add: Jammer: introduced amp_dBm in limits.xml profiles
  - add: JammerControl: config items
  - add: JammerControl: more config items for power & SP4T config forward
08.11.2022 - v2.2.0.11948
  - add: jammer: initial state of power limits calculations/gain reductions/ generator ramp
  - add: jammer: initial state of power limits calculations/gain reductions/ generator ramp
  - add: jammer: initial state of power limits calculations/gain reductions/ generator ramp
  - add: jammer: initial state of power limits calculations/gain reductions/ generator ramp
08.11.2022 - v2.2.0.11938
  - add: Block KMTronic Web Relay Feature Block
  - add: linear regression to library
  - add: more config items for jammer control units
  - add: New Block "Jammer_Control_Power_Board"
08.11.2022 - v2.2.0.11927
  - add: experimental asynchronous set of config items
  - add: JAMMER: introduced tx attn power limits profile data file in CDATA
  - add: more config items for jammer control units
  - add: more config items for jammer control units
  - add: more config items for jammer control units
  - add: WIP! New block for KMTronicWebRelay boards
07.11.2022 - v2.2.0.11917
  - add: New keys for PCAPNG File Writer
07.11.2022 - v2.2.0.11912
  - add: "Frequency Offset Block" Added remote config item for "FrequencyResult" to be used with /remoteconfig HTTP API
  - add: "Frequency Offset Block" Added remote config item for "FrequencyResult" to be used with /remoteconfig HTTP API (v2.6.0.1)
  - add: SUITE-2132: DJI_DECODER: New drone type "DJI Avata"
  - add: V6 DSP buffer configuration
06.11.2022 - v2.2.0.11906
  - add: Added new Frequency Profiles
  - fix: SUITE-2129 warning when TX USB rate drops
05.11.2022 - v2.2.0.11901
  - add: Keys for Wrapped Spectrum 32
  - add: wrapped spectrum 32 wrapp feature
  - fix: marker tabel position for wrapped spectrum
04.11.2022 - v2.2.0.11895
  - add: Key for Programmable SP4T Switch
  - add: Programmable SP4T Switch
  - fix: Programmable SP4T Switch
03.11.2022 - v2.2.0.11876
  - add: New Frequency Profile GNSS_band_Span
02.11.2022 - v2.2.0.11872
  - add: remote controls to UFO generator
  - fix: SUITE-2123 local in IQ power statistics block
  - fix: SUITE-2123 locale for numbers in harmonics and intermodulation analyzer
  - fix: SUITE-2124 Open settings in the ribbon extend beyond the RTSA
01.11.2022 - v2.2.0.11864
  - add: hopping tests for V6 Eco
27.10.2022 - v2.2.0.11843
  - fix: SUITE-2116 disable VT30 detector
26.10.2022 - v2.2.0.11839
  - add: softstart to V6 frequency step generator
  - fix: SUITE-1823 set default scangroup for V6 and V6 eco to none
25.10.2022 - v2.2.0.11832
  - add: SUITE-2112 add EVO Nano+
  - add: sweep alternate and soft start for sweep for V6 signal generator
  - fix: crash when opening mission with hidden drone command center window
22.10.2022 - v2.2.0.11821
  - fix: SUITE-2111 layout of DDC info tab not retained
21.10.2022 - v2.2.0.11817
  - fix: memory leak in JSIQA logging
19.10.2022 - v2.2.0.11809
  - fix: boundary sample error in sweep aggregate block
18.10.2022 - v2.2.0.11805
  - add: [WorkInProgress] Introduced new RTSA_BLOCK MessageType "MT_SET_PATTERN_FREQUENCY" to configure pattern generator in sweep mode
  - fix: Need to check for libxcb-Xinerama in Linux launch script as it is required by libqxcb and is missing in default Ubuntu installs
15.10.2022 - v2.2.0.11788
  - add: Jammer Control block
  - add: Jammer Control rtsakey
  - fix: BlockEditor graph layout crash when closing the app
  - fix: ConfigItemGroup wasn't set to visible after merging
14.10.2022 - v2.2.0.11785
  - fix: SUITE-2109 timing in V6 decimated FFT capture causing problems in drone detection
14.10.2022 - v2.2.0.11782
  - fix: software IQ DC compensation block
12.10.2022 - v2.2.0.11776
  - add: channel selection in V6 Eco
  - add: on the fly center frequency change in V6 ECO
  - add: p4ignore.txt ( exclude files from reconcile )
11.10.2022 - v2.2.0.11771
  - add: SUITE-2105 separate outputs for extended conditions in spectrum condition block
08.10.2022 - v2.2.0.11760
  - add: SUITE-2096 add drone (and focus drone) info to clipboard from drone info pane using context menu
  - add: SUITE-2105 extended condition settings for spectrum condition mask block
05.10.2022 - v2.2.0.11742
  - add: ssi configuration for rx in V6 eco
  - add: SUITE-2102 get markers of a block using JSIQA
05.10.2022 - v2.2.0.11737
  - add: SUITE-2103 / Append new DJI serial number orefixes
30.09.2022 - v2.2.0.11715
  - fix: restore original marker position when using paths on geomap markers
29.09.2022 - v2.2.0.11712
  - add: downcoverter test code
  - add: SpectranV6Eco ADI library code
  - fix: actually process "type" parameter in script block Mission.setConnectors() function
  - fix: BPSK Constellation output
29.09.2022 - v2.2.0.11703
  - add: SUITE-2077 add "path" and "tripath" geomap markers
28.09.2022 - v2.2.0.11700
  - fix: Crash shutdown script block
27.09.2022 - v2.2.0.11695
  - add: prepare dynamic script block connectors
  - add: start FPGA firmware in V6 eco
  - add: SUITE-2083 add dynamic inputs and outputs to script block
  - fix: SUITE-1873 changed undefined to null in arrays, and ignored undefined in objects for JSON.stringify
26.09.2022 - v2.2.0.11685
  - add: New icons for Spectran_V6ECO and Spectran_V6PLUS
  - fix: read 16 bit power values from ECO
25.09.2022 - v2.2.0.11679
  - add: more V6 eco files
23.09.2022 - v2.2.0.11671
  - fix: SUITE-2100, Linux: prevent user from installing and using RTSA as root user.
22.09.2022 - v2.2.0.11668
  - fix: build order V6 eco
22.09.2022 - v2.2.0.11665
  - fix: build order of V6 eco
22.09.2022 - v2.2.0.11662
  - fix: direction of detected video drones
22.09.2022 - v2.2.0.11658
  - add: V6 eco base classes
21.09.2022 - v2.2.0.11655
  - fix: SUITE-2097 flickering drone detection when camera moves
  - fix: SUITE-2098   Incorrect drawing of Multi Spectrum Zoom block if Multi Output is selected
19.09.2022 - v2.2.0.11648
  - fix: heap corruption due to racing condition in drone tracking
19.09.2022 - v2.2.0.11644
  - fix: over allocation of table entries in http client/server block views
17.09.2022 - v2.2.0.11639
  - add: prepare V6 eco firmware load
  - add: SSB demodulation support (SUITE-1951)
  - add: V6 eco FX3 firmware
16.09.2022 - v2.2.0.11633
  - add: SUITE-2094 add MRGS coordinate system
15.09.2022 - v2.2.0.11629
  - add: DC26 template key
  - add: dynamic pan to graph area
  - add: package for 26G down converter
  - add: SUITE-167 Import "Profile" & "Limits" Editor from MCS Software to RTSA ( initial checkin )
  - add: SUITE-2092   "Jammer Control Panel" block needed ( initial checkin )
  - add: V6 downconverter key to developer all
  - fix: Put fields of alert block events into proper column of the log
  - fix: V6 downconverter ignore device not present
13.09.2022 - v2.2.0.11612
  - add: dynamic pan feature to frequency axis
  - add: SUITE-2091 emulate realtime button to time shift block
13.09.2022 - v2.2.0.11608
  - add: remote control for wrapped spectrum block using panning in downstream block
13.09.2022 - v2.2.0.11604
  - fix: CL11573 message types extended, but not message type name array
  - fix: Fixed problem when loading corrupted data from V6 flash
  - fix: SUITE-2090 fix memory leak in file reader preview
01.09.2022 - v2.2.0.11575
  - add: HTTP Server: New function "load" added to /control endpoint that allows to remotely load a mission file using the REST API
  - add: New "Frequency Offset" Block
27.08.2022 - v2.2.0.11557
  - add: Data Export from IQ Oscilloscope (SUITE-2064)
  - fix: lockup of high precision FFT with small sizes
26.08.2022 - v2.2.0.11553
  - ADD: Private Yuneec DroneID package
  - add: SUITE-2088 Blockgraph Editor: Indicate hidden items on empty search result
  - Add: YUN Package file 2.1
  - fix: SUITE-2082 Connections do not retain color in custom blocks
23.08.2022 - v2.2.0.11538
  - add: SUITE-2084 double precision FFT
  - add: SUITE-2084double precision FFT
23.08.2022 - v2.2.0.11534
  - add: high prec FFT (not yet public)
20.08.2022 - v2.2.0.11527
  - add: PcapNG File Writer to allow 802.11 exports to Wireshark and similar tools
  - fix: Out of bounds memory writes in pulse filter for large inputs
  - fix: SUITE-2058 SweepZoom RBW setting <1kHz not visible after reload
18.08.2022 - v2.2.0.11517
  - fix: eliminate stream restart in unaffected outputs in receiver band sequencer when changing input
  - fix: extend marker frequency range to 30GHz
17.08.2022 - v2.2.0.11510
  - add: SUITE-2076 add control over focus element in JSIQA text table
  - add: SUITE-2081 more shape options for geomap markers
  - fix: enum pattern and value change in JSIQA Mission.setConfig
  - fix: SUITE-1850 stop IsoLOG autorotate when selecting sector
16.08.2022 - v2.2.0.11501
  - add: V6E downconverter and filterbank factories
  - fix: SUITE-1966 combining condition block performance
15.08.2022 - v2.2.0.11497
  - add: frequency mirror to frequency shift block
  - fix: buffer overflow in trace max average
  - fix: frequency range in frequency shift block
13.08.2022 - v2.2.0.11491
  - add: JSIQA HTTP stream get for chunked data streams
  - add: Simple Trigger block to provide an easier way to configure the most common trigger use case
  - fix: race condition in JSIQA HTTP get
12.08.2022 - v2.2.0.11485
  - add: serial number for axis camera and drone video tracking
  - add: SUITE-1966 added CombiningCondition and TriggerAndHold blocks to script DSP blocks
  - fix: SUITE-1966 fixed performance issue in trigger block
11.08.2022 - v2.2.0.11476
  - fix: crash in script block when manually removing marker
10.08.2022 - v2.2.0.11472
  - fix: IsoLOG V6 close UDP socket on stop rotate
09.08.2022 - v2.2.0.11469
  - fix: Potential crash in config item combowidget
  - fix: PowerLimits Data Point table column title wasn't updated after unit change
  - fix: Segment ID in IsoLOG V6
08.08.2022 - v2.2.0.11465
  - add: SUITE-2071: Linux install, was missing in Linux installer script
  - add: SUITE-2071: Linux install, was missing in Linux installer script
  - add: SUITE-2075 Antenna name in DDCC input table
06.08.2022 - v2.2.0.11455
  - add: New ChartColorMapperPalette items:  SpectranViri (aka. Viridis256), SpectranOrangeHot (SdrSharp Export style Orange Hot), SpectranLambda (High Contrast)
  - add: New DJI model "Mini 3 Pro" (SN prefix 'F4X')
  - fix: chopper to normal rotation transitions in IsoLOG V6
  - fix: IsoLOG V6 segment change during chopper mode
05.08.2022 - v2.2.0.11448
  - add: GPS support for IsoLOG V6
  - add: SUITE-2068 visualize connection between drone and remote
03.08.2022 - v2.2.0.11438
  - add: SUITE-1896 half power bandwidth measurement for spectrum marker function
  - add: SUITE-1896 Half power banwidth measurement added to channel power
02.08.2022 - v2.2.0.11434
  - add: SUITE-1897 add log message to info center if NTP server port was not available
30.07.2022 - v2.2.0.11427
  - add: SUITE-2013 tracking output in IQ WiFi drone detector
  - add: Support for external V6 filter bank
  - fix: further disabled license checking for drone tracking sources
  - fix: SUITE-2069 JSON.parse chokes on whitespace in empty array
29.07.2022 - v2.2.0.11421
  - add: SUITE-2060 forwarding graph messages accross http connectios
28.07.2022 - v2.2.0.11418
  - add: SUITE-1992 more units for config items
  - fix: SUITE-2065 JSIQA Date.parse
27.07.2022 - v2.2.0.11413
  - fix: IEEE802.15-4 decoding for severly distored symbols
26.07.2022 - v2.2.0.11410
  - add: check serial numbers for license key in drone track control block (disabled)
  - add: MavLink2 to mavlink decoder
  - add: serial numbers to antennas in stream
20.07.2022 - v2.2.0.11390
  - add: color palette and freq/time control to IQ pulse inspector
19.07.2022 - v2.2.0.11387
  - add: SUITE-2053 config items for current cell in texttable
16.07.2022 - v2.2.0.11380
  - add: Additional IQ File Writer features
  - fix: Fix AM/FM Demodulator startup configuration initialization
  - fix: SUITE-2054 realtime config update broke V6 settings
15.07.2022 - v2.2.0.11375
  - add: more relative center frequencies for QAM and FSK modulation in signal generator
  - add: SUITE-2045 IQ signal generator frequency in ribbon
14.07.2022 - v2.2.0.11370
  - fix: SUITE-2052 tracking generator reference trace
13.07.2022 - v2.2.0.11367
  - add: SUITE-2040 power level for Tx in ribbon
  - add: SUITE-2046 progress bar for export in time shift block
  - fix: SUITE-2050 antenna/detector list differs between tooltip and info section in DDCC
12.07.2022 - v2.2.0.11356
  - add: colors to table row in IQ power statistics block
09.07.2022 - v2.2.0.11348
  - add: IQ file format overrides to File Source
  - add: IQ File Writer
  - add: SUITE-2047 Active count down time if startup delay is enabled
  - fix: Raw IQ File Writer category, name and icon
08.07.2022 - v2.2.0.11342
  - fix: crash in wrapped spectrum multi input when using reference trace
  - fix: marker display in lower ranges of wrapped spectrum
  - fix: SUITE-2036 reordering of track info
  - fix: SUITE-2037 frequency of mavic mini not shown
  - fix: SUITE-2042 increased number of inputs of DJI drone detector to four
07.07.2022 - v2.2.0.11336
  - add: SUITE-2042 increase number of inputs to inner scriptblock to 12 from 8
  - fix: SUITE-2038 updated combined transponder drones to show latest position
07.07.2022 - v2.2.0.11333
  - add: SUITE-2028 second trace input for wrapped spectrum block
  - Bugfix: FLIR addr in chart
  - fix: submit crash in DJI drone ID decoder
06.07.2022 - v2.2.0.11327
  - fix: SUITE-2022 multi detection of DJI drone ID drones, if made with IsoLOG
  - fix: SUITE-2023 MavLink decoder error status
05.07.2022 - v2.2.0.11321
  - fix: Potential crash when using RTSA with disabled SplashScreen
  - fix: Problem in MavLink Decoder - internal name has a typo
05.07.2022 - v2.2.0.11314
  - fix: time explosion on small time correction in compression block
05.07.2022 - v2.2.0.11308
  - fix: SUITE-1115 ROC App restarts RTSA not with "mission" parameter
01.07.2022 - v2.2.0.11292
  - add: SUIITE-2024 add frequency to mav link decoder
  - add: SUITE-2024 add frequency info for FLARM decoder
  - add: SUITE-2024 add frequency info to ADSB decoder
  - add: SUITE-2024 frequency info for DJIID decoder
  - fix: crash in file source scrubbing when size becomes zero
30.06.2022 - v2.2.0.11283
  - add: reference trace to wrapped spectrum
29.06.2022 - v2.2.0.11279
  - fix: SUITE-1940 If ROC Client is running the RTSA could not be started
29.06.2022 - v2.2.0.11273
  - fix: crash when receiving invalid health status
29.06.2022 - v2.2.0.11270
  - add: IEEE 802.15.4 decoder for 2.4 GHz range
  - fix: Potential crash after closing the Shop dialog
28.06.2022 - v2.2.0.11266
  - fix: skip metadata headers on CSV trace import
21.06.2022 - v2.2.0.11248
  - fix: Offline Map Source, new URL
21.06.2022 - v2.2.0.11243
  - fix: SUITE-2023 add time error recovery code to drone tracker
20.06.2022 - v2.2.0.11234
  - add: error message logging for protected script blocks on crash
18.06.2022 - v2.2.0.11227
  - add: Raw-IQ Import to File Source and export to Flie Writer (SUITE-2025)
  - add: SUITE-1899 added IQ power statistics measurement block
15.06.2022 - v2.2.0.11218
  - fix: SUITE-1972  License Manager: Misleading display for permissions with serial constraint
14.06.2022 - v2.2.0.11213
  - fix: SUITE-2021  After "Reload Mission" no data inside detached window on addtional monitor
14.06.2022 - v2.2.0.11208
  - fix: crash in exporting reference trace
11.06.2022 - v2.2.0.11196
  - add: New List View for Package Shop
  - fix: IQ Signal Generator: Fix some glitches in basic waveforms generator
  - fix: IQ Signal Generator: Use __m256i instead of __m256i_u with MSVC
  - fix: State Info Labels wasn't updated after a style change
  - fix: SUITE-1285 Histogram Bins slider numeric value not live
  - fix: V6 dual channel spectra frequency limit only in low power now
10.06.2022 - v2.2.0.11187
  - fix: crash in pulse detector on switching spans
09.06.2022 - v2.2.0.11180
  - add: SUITE-1935 show frequency for WiFi drones
  - fix: Right click on graph editor icons could open the Package Shop
  - fix: SUITE-1687 Package Manager: installed packages not displayed in certain cases
09.06.2022 - v2.2.0.11173
  - add: DJI Drone ID: New SerialNo prefix  "11V" for "Phantom 4 Pro 2.0"
  - fix: Crash when exporting CrashReports on app startup
  - fix: http connection: rename meber variable mSampleLimit to mPacketLimit
  - fix: SUITE-2002 stream debugger spectrum scroll view
  - fix: SUITE-2018 Install can't be executed for this package
08.06.2022 - v2.2.0.11165
  - fix: Crash when opening mission with external monitor dock
07.06.2022 - v2.2.0.11140
  - add: exteranl trigger PDF
07.06.2022 - v2.2.0.11133
  - add: v6 trigger tutorial
07.06.2022 - v2.2.0.11121
  - add: SUITE-1837 add specific frequency keys for V6 tx mode
  - fix: SUITE-2011   "Marker Table View": Sync title with parent view
03.06.2022 - v2.2.0.11102
  - add: IQ support for trigger block
02.06.2022 - v2.2.0.11092
  - fix: RTSA_Staging_Generator produced double xml attributes
  - fix: timing of V6 FFT from FPGA
  - fix: V6 trigger time
01.06.2022 - v2.2.0.11081
  - add: trigger control to V6 IQ downsample filter
01.06.2022 - v2.2.0.11077
  - fix: naming error introduced with CL11067
01.06.2022 - v2.2.0.11072
  - fix: DSPStreamSampleUnitNames: dbm->dBm
  - fix: format start and offset time individually to preserve precision
01.06.2022 - v2.2.0.11066
  - add: SUITE-2012 Tx streaming sample missions
  - fix: SUITE-2012: IQHalfBandInterpolationFilter, use _mm256__fmadd_ps instead of __256_add_ps to optimize performance on Skylake CPUs
  - fix: SUITE-2012: Linux: libusb_fill_bulk_transfer timeout>0 causes bulk_transfer to timeout, even if suceeded....
31.05.2022 - v2.2.0.11061
  - add: halfband upsampling filters for V6 tx input, matching the span decimator
28.05.2022 - v2.2.0.11045
  - add: SoapySDR remove comments / unused code
  - add: SoapySDR: fix clock
  - add: SoapySDR: starting with UI stuff
  - add: SoapySDR: StreamClock references correct buffer size
  - add: SpoapySDR: Ensure ReadStream fills DSPStream package
  - fix: Linux: USB V6 device check now uses device ID
  - fix: USB V6 device check now uses device ID
27.05.2022 - v2.2.0.11030
  - add: prepare for SoapySDR dynamic linking
  - add: prepare RTSA for SoapySDR dynamic linking
  - add: SoapySDR Working basic template code, based on TektronixRSA block
  - add: SoapySDR: fix readStream evaluate result lenght
26.05.2022 - v2.2.0.11022
  - fix: linux qmake configs
  - fix: linux qmake configs
  - fix: linux qmake configs
  - fix: linux qmake configs
25.05.2022 - v2.2.0.11007
  - add:SoapySDR: skeleton project for API wrapper
  - add:SoapySDR: skeleton project for API wrapper
  - fix: Crash in Feedback dialog at app startup
  - fix: Crash in PackageShop if no item was selected. Options menu shouldn't be visible in this case.
25.05.2022 - v2.2.0.10997
  - add: Package Shop
  - add: RTSAKeys for SoapySDR
  - add: SUITE-2012 config item for Tx stream clock variance
  - add:SoapySDR: skeleton project for API wrapper
  - add:SoapySDR: skeleton project for API wrapper
  - add:SoapySDR: skeleton project for API wrapper
  - fix: exclude SOAPY for Windows builds
  - fix: exclude SOAPY for Windows builds
  - fix: exclude SOAPY for Windows builds
  - fix: exclude SOAPY for Windows builds
  - fix: include SOAPY for Linux builds
24.05.2022 - v2.2.0.10969
  - add: DJI DroneID WiFi Decoder: Map product type code to DJI Model
21.05.2022 - v2.2.0.10961
  - add: Basic waveforms generator to IQ Signal Gen (SUITE-1985)
  - add: SDK sample for parallel receive via Rx1 and Rx2
  - fix: IQ DJI DroneID package: Increment version
  - fix: SUITE-2007 file source progress bar with IQ data
  - fix: SUITE-2008 lockup in pulse extractor during scrubbing
20.05.2022 - v2.2.0.10943
  - add: DJI Phantom 4 IQ decoder
  - add: IQ DJI DroneID Decoder, added home and remote position for WiFi decoder
  - add: IQ DJI DroneID Decoder, added home and remote position for WiFi decoder
  - add: new DJI drone ID decoder package build
  - add: new drone ID package
  - add: new drone ID package build
  - Bugfix: GPS  - incomplete update for Altitude, Azimuth and Declination
  - Bugfix: Isolog Declination
  - fix: IQ DJI DroneID Decoder, home and remote position for WiFi decoder
  - fix: IQ DJI DroneID Decoder, remote position fix for Ocusyncdecoder
19.05.2022 - v2.2.0.10932
  - add: keep alive config to DJI ID decoder
18.05.2022 - v2.2.0.10929
  - add: Add new DJIIDs to drones.xml
  - add: use CDATA for script block sources to improve merging
18.05.2022 - v2.2.0.10918
  - add: WiFi decoder for DJI drone ID detection block
  - fix: SUITE-1991 typo in geomap fixed grid config
  - fix: SUITE-1994 fix filesource reading of small packet files
17.05.2022 - v2.2.0.10897
  - add: SUITE-1974 add raw symbols to json export of pulse inspector
16.05.2022 - v2.2.0.10893
  - fix: SUITE-2000 infinite loop in file writer causing http streamer to block
14.05.2022 - v2.2.0.10886
  - add: color coding config for timeline of IQ pulse inspector
  - add: New "Turbo" Color Scheme
  - add: SUITE-2003: Optimized Colortable for Waterfall and Histogram "Spectran" (Derived from Google Turbo)
  - fix: Style: HealthOperationalBackground set to #00D05C (Green insted of MintGreen)
  - fix: SUITE-2001 switch between sweep and non sweep with dll
13.05.2022 - v2.2.0.10875
  - add: additional dji serial prefixes (J)
  - add: SUITE-1999 low power mode config, disables low power warning of V6
  - fix: for ambiguous model-by-dji-serial, use an official drone name (J)
12.05.2022 - v2.2.0.10868
  - add: DJIID drone names into drones xml
  - add: Mavic Air 2 S to known DJI model names
  - add: Resolve known DJI model names by serial number and added to decoder symbols
  - fix: typo in known DJI model names
12.05.2022 - v2.2.0.10862
  - add: DroneId 0x48 for Ocusync 1: serial and gps (J)
  - Add: GetAzimuth, GetAltitude, GetDeclination
  - add: New IQ RAW export mode for RTSAFileTool
  - add: packet type 0x48 for DJI block
  - fix: RTSAFileTool export: huge offset in exported stream when no explicit start/end timestamp specified.
11.05.2022 - v2.2.0.10851
  - add: 3 flags for DroneId and signed fix for some types (J)
  - add: drone ID based FOF classification
  - add: print DroneId raw bytes in debug mode for later analysis (J)
  - fix: M_PIf32 missing in windows build (J)
  - fix: remove accidental merge blunder (J)
10.05.2022 - v2.2.0.10844
  - add: Add 5GHz band to DJI droneId decoder
  - add: alternate 6d package length for DJI decoder
  - add: Altitude for droneId
  - add: missing package for DJI Drone ID
  - add: SUITE-1995 multiple inputs to receiver band sequencer
10.05.2022 - v2.2.0.10837
  - add: DJI DroneID decoder package
  - fix: SUITE-1995 correct frequency based input selection in SP4T with band sequencer block
10.05.2022 - v2.2.0.10833
  - add: DroneId second frame parsing and minor refactoring (J)
  - add: Interpret DJI drone ID type 0x6d as position frame
  - add: script block for DJI Drone ID to DDCC
07.05.2022 - v2.2.0.10822
  - add: DJI drone 8 OFDM symbol decode
  - fix: panning in file reader block
06.05.2022 - v2.2.0.10815
  - add: reject invalid DroneId packets based on CRC (J)
  - add: turbo decoder to dji drone ID
05.05.2022 - v2.2.0.10810
  - add: CRC24 LTE-A (J)
  - add: droneid struct marshalling (J)
  - add: initial version for DJI symbols parser
  - add: local debug output for droneid
  - add: local debug output for droneid - frame type 0x58
  - add: local debug turboFec dec for droneid
  - add: local debug turboFec dec for droneid
  - add: viterbi decode for drone ID instead of external process
  - fix: end bits of viterbi decoder
04.05.2022 - v2.2.0.10795
  - add: drone ID decoder up to QPSK
  - add: scrambler for DJI Drone ID
  - add: Scrambler for DJIDroneId (J)
  - fix: fix windows buildserver
  - fix: fix windows buildserver
  - fix: scrambler for DJI drone id
03.05.2022 - v2.2.0.10785
  - fix: SUITE-1991 letters in custom grid mode
30.04.2022 - v2.2.0.10775
  - add: SUITE-1991 add custom grid for geo map
28.04.2022 - v2.2.0.10766
  - fix: Possible crash in Package Editor dialog
  - fix: Possible WatchDog events based on long compress operations
  - fix: Possible WatchDog events based on processing large downloaded packages
  - fix: When clicking in an child dock the parent was selected instead
26.04.2022 - v2.2.0.10759
  - add: key for Offline Maptile Server functionality
  - add: Placeholder for additinal UAV frame decoder
  - add: SUITE-1981 extend marker range features
  - fix: offline map tiles keyname
26.04.2022 - v2.2.0.10751
  - add: SUITE-1986 add pulse threshold to directional find block
26.04.2022 - v2.2.0.10748
  - fix: SUITE-1987 merge ocusync 1 and 1-3 decoders to avoid duplicate detection
23.04.2022 - v2.2.0.10741
  - fix: SUITE-1988 slowdown of refresh with marker power display
  - fix: SUITE-1989 marker table limited to 64 markers
22.04.2022 - v2.2.0.10738
  - add: SUITE-1978 pan, scale and more adaptive response to dynamic full range mode
21.04.2022 - v2.2.0.10735
  - fix: LINUX: JSIQ AIO: library loader path fix
14.04.2022 - v2.2.0.10720
  - fix: SUITE-1979 playback positrion in file source block, and dropped packets on file writer start
13.04.2022 - v2.2.0.10717
  - add: SUITE-1967, Offline MAP Server
  - add: SUITE-1974 export pulse data from pulse inspector
12.04.2022 - v2.2.0.10712
  - add: SUITE-1977 add secondary view for marker table to spectrum, wrapped spectrum, waterfall and combo view
12.04.2022 - v2.2.0.10707
  - fix: Crash report from [email protected] 2├ƒ22-04-11
11.04.2022 - v2.2.0.10701
  - fix: display of old drone tracking files
08.04.2022 - v2.2.0.10693
  - add: SUITE-1969 mouse coordinates in script block
  - fix: crash in drone detection block on FFT size change
  - fix: use ISO time for HTTP JSON response
08.04.2022 - v2.2.0.10687
  - fix: Pause button in dock header wasn't updated properly
  - fix: SUITE-1971Spectran V6: Need features check on mission load
07.04.2022 - v2.2.0.10683
  - fix: SUITE-1983 increase number of vertices in monitored area to 100
06.04.2022 - v2.2.0.10678
  - Bugfix: declination from script antenna
  - Bugfix: deg->rad correction for ANTENNA_CHANGED in dds.js
05.04.2022 - v2.2.0.10672
  - fix: declination from script antenna
  - fix: SUITE-1976 multiple detection of not connected drone
04.04.2022 - v2.2.0.10668
  - add: attach cursor to marker table in secondary view
  - add: marker table in child block of spectrum
  - add: SUITE-1975 limit line delta in marker table of wrapped spectrum
  - fix: Potential crash in Package Editor Dialog
  - fix: Potential crash in Power Limits Editor Dialog
31.03.2022 - v2.2.0.10656
  - add: hardware trigger support for V6 IQ stream
  - fix: crash in marker table of wrapped spectrum view when selecting specific marker
31.03.2022 - v2.2.0.10646
  - Bugfix: dds correction an gpsOffset-Block correction due to different elevation/altitude names in packages (sendGraph)
  - fix: SUITE-1932 use file path for recording size check
30.03.2022 - v2.2.0.10639
  - fix: Crash when updating a package in a new mission
25.03.2022 - v2.2.0.10624
  - add: New option in Block Graph Editor Configuration: "Set as App Default"
  - fix: debug overlog
  - fix: increase space for in tree nodes of drone legend tree
24.03.2022 - v2.2.0.10618
  - add: late wakeup warning in debug log file for V6 data streame
23.03.2022 - v2.2.0.10612
  - add: IQ noise filter path to IQ direction power spectrum block
  - Fix: HISLIP-SCPI Server Space in blocknames
23.03.2022 - v2.2.0.10602
  - fix: protect from crash in broken RTSP response on hikvision cam
22.03.2022 - v2.2.0.10598
  - fix: Modified .pro configuration to fix Linux AVX build
  - fix: test for AVX2 support on linux
19.03.2022 - v2.2.0.10588
  - add: V6 Rx trigger
16.03.2022 - v2.2.0.10578
  - add: SUITE-1932 show free disk space and warn if below 10GB
  - fix: crash due to drone detection overload (>200 simultaneous detections)
15.03.2022 - v2.2.0.10570
  - fix: RTSA build script
15.03.2022 - v2.2.0.10567
  - fix: SUITE-1923 legend config not updated after load
14.03.2022 - v2.2.0.10553
  - add: Package HISLIP-SCPI Server
12.03.2022 - v2.1.1.10536
  - Bugfix: forgotten Auto start...
11.03.2022 - v2.1.1.10527
  - Bugfix: Missions.js - undefined value wehen pressed Button within group
  - Bugfix: PTZ Head - cleanUp due changes in mission.js
10.03.2022 - v2.1.1.10522
  - fix: SUITE-1962 left mouse click into dialog sprite closed sprite
10.03.2022 - v2.1.1.10517
  - add: more IQ remote detectors
09.03.2022 - v2.1.1.10514
  - add: FlySky IQ Drone RC detection
  - add: more autotest
  - add: show attribute for JISQA chart items
  - fix: add missing package file for FrequencyRangeFollower with description links
08.03.2022 - v2.1.1.10507
  - Fix: Fixed and improved Undo/Redo
  - fix: handle leak in USB enumerate devices call
  - fix: improve stability of DSP thread scheduler
04.03.2022 - v2.1.1.10490
  - add: five second retain period for IQ based remote detection
  - add: SUITE-1926 hide beam/cone on a per antenna type
  - add: SUITE-1933 add LIVE/REPLAY status display in DDCC
  - fix: SUITE-1929 non dBm export to csv
  - fix: SUITE-1938 stop sweep when disconnecting sweep block
03.03.2022 - v2.1.1.10482
  - fix: remote config meta data for script block config items
  - fix: SUITE-1855  Grid changement is possible for User without any rights
  - fix: SUITE-1910 No data will be transferred if User Management is enabled and Sat gets restartet
02.03.2022 - v2.1.1.10469
  - fix: JSIQA dictionary delete element
01.03.2022 - v2.1.1.10466
  - add: stream overflow debug error button
  - fix: SUITE-1937 fix memory leak in IQ drone detector
01.03.2022 - v2.1.1.10462
  - add: SUITE-1930 add power unit to exported data files
28.02.2022 - v2.1.1.10459
  - add: trigger source config for V6 trigger debugging
25.02.2022 - v2.1.1.10448
  - fix: memory leak in command sequencer block
  - fix: SClock notch filter for packet sizes with non multiples of 16 IQ pairs
  - fix: wrong input names in drone detector block
23.02.2022 - v2.1.1.10430
  - Fix: V6 FW 0.4.254: Increased USB TX swing level
23.02.2022 - v2.1.1.10424
  - fix: Correctly determine frequency unit in chart
22.02.2022 - v2.1.1.10415
  - fix: pattern generator sweep precision
18.02.2022 - v2.1.1.10387
  - add: V6 Tx pattern generator autotest
17.02.2022 - v2.1.1.10368
  - add: emulate realtime playback in file source block
  - add: more V6 trigger testing
  - add: signal generator, pulse detector autotest
  - add: V6 trigger test code
  - fix: flags size in stream debug log
16.02.2022 - v2.1.1.10356
  - add: V6 sweep autotest
  - fix: SUITE-1854 cursor delta calculation for non dB units
16.02.2022 - v2.1.1.10351
  - add: prepare V6 trigger
15.02.2022 - v2.1.1.10344
  - add: SUITE-1614 IsoLOG V6 Proto Package
14.02.2022 - v2.1.1.10338
  - add: SUITE-1925 time offset for realtime file playback into Tx
12.02.2022 - v2.1.1.10327
  - add: call to autotest heartbeat in V6 test
  - fix: SUITE-1924 assert in new default mission
10.02.2022 - v2.1.1.10307
  - add: SUITE-1849 remote config for IQ signal generator
  - fix: SUITE-1887 changed beam length to 100km
10.02.2022 - v2.1.1.10301
  - add: IQ drone remote detector for RadioLINK AT10
09.02.2022 - v2.1.1.10288
  - add: Autotest for V6 start/stop
09.02.2022 - v2.1.1.10282
  - add: RTSA AutoTest scripts
08.02.2022 - v2.1.1.10279
  - fix: Log texts with line feeds were rendered too large
08.02.2022 - v2.1.1.10273
  - fix: SUITE-1921 force vector scope min/max/avg lines off for long missing phase ranges
05.02.2022 - v2.1.1.10265
  - add: Health Monitor v2
  - fix: SUITE-700 Mark as read in info center
02.02.2022 - v2.1.1.10253
  - add: autotest feedback function to script block
  - add: initial autotest
  - fix: Crash in Feedbackdialog when taking snapshots of already closed dialogs
  - fix: Feedbackdialog wasn't able to take snapshots of floating docks anymore
  - fix: memory leak in jsiqa http client
01.02.2022 - v2.1.1.10240
  - fix: crash in drone pattern detector
31.01.2022 - v2.1.1.10237
  - add: SUITE-1914 multiple NTP servers
  - fix: increase number of vertices in waterfall view of drone pattern detector
  - fix: linux: static link libFTDI
  - fix: SUITE-1901 scaling of QAM overlay in IQ osci
  - fix: update Linux ftdi driver to resolve libusb dependency issues
  - fix: update Linux ftdi driver to resolve libusb dependency issues
  - fix: update Linux ftdi driver to resolve libusb dependeny issues
29.01.2022 - v2.1.1.10223
  - add: Added feature to delay the initial load of a mission by 'n' seconds. This can be configured in the RTSA Configuration dialog
  - add: SUITE-1912 stream time offset display in V6 status
  - add: SUITE-1913 put dsp stream time offset into log
27.01.2022 - v2.1.1.10215
  - fix: drone pattern detector for spectra sizes not divisible by 16
27.01.2022 - v2.1.1.10211
  - add: SUITE-1762 add map with markers to signal strength locator
25.01.2022 - v2.1.1.10205
  - fix: SUITE-1917: Aaronia GPS Logger, correct lat/lon value conversion
22.01.2022 - v2.1.1.10197
  - fix: SUITE-1431  Warning sound needed if device changes its state
20.01.2022 - v2.1.1.10191
  - add: transceiver mode to API dll
  - fix: clamp dsp streaming thread count
  - fix: new GPS serial device baud rate config item
19.01.2022 - v2.1.1.10182
  - fix: Linux: added Sense Lock HW Serial Dongles (NON RTC dongles) library
18.01.2022 - v2.1.1.10178
  - add: SUITE-1762 add user markers with direction beam to iso log directional find
  - add: SUITE-1811 Connect and Disconnect V6 with control sequencer
  - add: SUITE-1861 calibration for NRQ sensor
  - fix: SUITE-1907 increase number of useable marker buttons in map
15.01.2022 - v2.1.1.10168
  - fix: chopper mode with IsoLOG 6
11.01.2022 - v2.1.1.10156
  - add: SUITE-1902 functional buttons overlay for the map
  - fix: HealthMonitor Case insensitive sorting
  - fix: SUITE-1908  Show Master Stream Time in status bar
07.01.2022 - v2.1.1.10142
  - add: AppDashBoardWidget
  - add: Package Editor : Mark Packages for integration into Graph Editor
  - fix: PackageManager info messages caused the InfoCenter to popup
07.01.2022 - v2.1.1.10134
  - fix: use proper serial number for GPS license check in SDK
06.01.2022 - v2.1.1.10130
  - fix: SUITE-1897 set synch flag and IP address in SNTP response
04.01.2022 - v2.1.1.10124
  - add: parseInt and parseFloat to builtins in JSIQA
  - add: segments to JSIQA antenna
01.01.2022 - v2.1.1.10115
  - fix: recursive V6 remote config
22.12.2021 - v2.1.1.10086
  - add: GPS time to RTSAApi
19.12.2021 - v2.1.1.10060
  - fix: linux: updated udev rules
  - fix: multiple sweep restarts for RTSAAPI dll
17.12.2021 - v2.1.1.10052
  - add: smooth realtime GPS correction of sample clock if downsampled
  - add: SUITE-1897 add SNTP server and client to DSPStreamGraph
  - fix: Linux default to AVX2 build
  - fix: timer stop in jsiqa UDP connection
16.12.2021 - v2.1.1.10046
  - fix: preserve http headers containing colons
15.12.2021 - v2.1.1.10037
  - add: bounds check to IQ symbol decoder for QAM
14.12.2021 - v2.1.1.10034
  - add: SUITE-1898 probability threshold for drone map display
10.12.2021 - v2.1.1.10023
  - add: SUITE-1069 added endpoint for user position and status
08.12.2021 - v2.1.1.10013
  - fix: SUITE-1889  Selection Icons instead of pulldown for Ribbon Bar
08.12.2021 - v2.1.1.10006
  - fix: dronesdatabase test code
  - fix: Fixed crash due to strange mouse handling under linux. ( Right mouse press )
  - fix: keep frequency range when loading/saving V6 sweep zoom block and realtime span > 100MHz
  - fix: SUITE-1875 Linux: Suite crashes, when selecting Grid 1x1 via Context Menu
07.12.2021 - v2.1.1.9997
  - add: SUITE-1069 user info via HTTP REST
06.12.2021 - v2.1.1.9989
  - add: GPS clock pulse to V6 timing
  - fix: Possible crash in DockingUI function Divide
  - fix: Setting an invalid DockingUI caused problems
  - fix: SUITE-1895  Feature_PackageCreator should enable "Create derived factory" action for Script block
03.12.2021 - v2.1.1.9970
  - fix: limit size of tooltip map images to 1024x1024
  - fix: Minor fix in block title rendering
  - fix: SUITE-1894 Check for missing feature keys does not work for built-in blocks
27.11.2021 - v2.1.1.9945
  - fix: Random crashes on GNU/Linux due to SSE alignement
26.11.2021 - v2.1.1.9939
  - fix: SUITE-1881 Drone direction suffers on greater distance
24.11.2021 - v2.1.1.9931
  - fix: Broken creation of Perforce changelists
23.11.2021 - v2.1.1.9925
  - add: SUITE-1882 customer adjustable clock scale factor
  - add: SUITE-1893 add WiFi drone vendor to drone name
  - fix: ASSERT in watchDog
  - fix: autostart of IQ Drone WiFi detector
  - fix: some heap fragmentation
  - fix: SUITE-1886 TxConfig dialog opens outside visible desktop
18.11.2021 - v
  - fix: SUITE-1163 Calibration Block: missing input trace in graph
  - fix: SUITE-1769 Package Manager: External hyperlinks do now open in system default browser.
18.11.2021 - v2.1.0.9851
  - add: SUITE-1874 add color coded display for number of sats in waterfall
  - fix: SUITE-1163 V6 Calibration Block: Unique colors for traces and legend now lists "Power Offset" & "HF Path"
  - fix: SUITE-1487: GPS Block. Enforce 20 second timeout for serial port NMEA devices / Report block error if GPS fix fails
17.11.2021 - v2.1.0.9832
  - add: new scheduler modes for DSP scheduler to allow more parallel streams on 64core threadripper
  - fix: linux build
  - fix: SUITE-1865, Linux/libUsb, USB connection on application startup now works reliably. Likewise, reconnecting after unplugging USB now also works under Linux.
16.11.2021 - v2.1.0.9823
  - fix: V6 startup crash on firmware load problem
16.11.2021 - v2.1.0.9819
  - fix: SUITE-1869 rename IQ WiFi drone detector inputs
15.11.2021 - v2.1.0.9808
  - add: V6 auto reset after 15 seconds of no communication
  - fix: SUITE-1859 AM/FM Demodulator, Add channel now uses "Channel Width" from Main config item.
  - fix: SUITE-1859 AM/FM Demodulator, Add channel now uses "Channel Width" from Main config item.
15.11.2021 - v2.1.0.9803
  - fix: V6 BSOD caused by premature USB buffer release in error situations
11.11.2021 - v2.1.0.9763
  - add: fix for intel graphics driver memory leak using shared PBOs
  - fix: crash in sector waterfall on iso log autorotate start
  - fix: Crash when restarting app with open mission
  - fix: minor memory leaks
11.11.2021 - v2.1.0.9746
  - fix: Conditinal expression failes to auto cast MemberHandle<T> with GCC
  - fix: Set DEBUG_BUFFER_USAGE only for Windows builds
  - fix: SUITE-1828 fix WiFi 5.8 range
10.11.2021 - v2.1.0.9741
  - add: gps sat information in streams and files
  - fix: crash in linux due to misalined sse load
08.11.2021 - v2.1.0.9733
  - add: App-wide privileges for Blockgraph Edtor
  - fix: DragNDrop to create new blocks
05.11.2021 - v2.1.0.9718
  - add: debug info to packet factories
  - add: SUITE-1838 add size control for antennas in DDCC 3D view
  - add: SUITE-1847 Blockgraph Editor configuration inside User Editor
  - fix: SUITE-1836 find dialog in script editor triggers twice
04.11.2021 - v2.1.0.9706
  - add: After canceling the authentification dialog, the user can re-enter his password to stay in the app instead of just closing it
  - fix: Auto Clean Crashreports was called always in NIG mode
03.11.2021 - v2.1.0.9700
  - add: SUITE-1834 binary samples to Tx via HTTP connection
30.10.2021 - v2.1.0.9685
  - fix: SUITE-1830 unrealistic max hold
27.10.2021 - v2.1.0.9675
  - fix: SUITE-1784 add interpolation for RF geo heatmap
22.10.2021 - v2.1.0.9654
  - fix: add protection for crash in spectrum marker code
  - fix: SUITE-1778 auto detect PAL/NTSC video
  - fix: SUITE-1835 detector FFT size lockup
21.10.2021 - v2.1.0.9649
  - fix: potential deadlock leading to watchdog induced crash in IQ chopper converter block
19.10.2021 - v2.1.0.9642
  - add: SUITE-1833 serial number to V6 device info
  - fix: division by zero crash in recorder block
16.10.2021 - v2.1.0.9633
  - add: SUITE-1788 triangulation with IsoLOG directional find block
12.10.2021 - v2.1.0.9623
  - fix: rare crash in file writer when changing sample size
07.10.2021 - v2.1.0.9612
  - fix: Ribbon buttons wasn't updated correctly on saved external monitors
07.10.2021 - v2.1.0.9605
  - add: Minimize / Maximize and Dock All Button on 'External Monitor' windows
  - fix: Memory leaks
06.10.2021 - v2.0.0.9590
  - fix: SUITE-1818 live video cam color
  - fix: SUITE-1819 color decoding in PAL
04.10.2021 - v2.0.0.9580
  - add: SUITE-1803 Overload should be indicated clearly within the RTSA
01.10.2021 - v2.0.0.9563
  - add: New icons for blocks
  - fix: SUITE-1797 false detection of generic remote
01.10.2021 - v2.0.0.9552
  - fix: SUITE-1800 instable beam for detection
  - fix: SUITE-1806 pattern generator not turned off on Stop
30.09.2021 - v2.0.0.9539
  - add: New icons for blocks
  - fix: SUITE-1802 Important things should be shown inside "Short Description" of a block
30.09.2021 - v2.0.0.9534
  - add: New icon for block IQDirectionPowerSpectrum
29.09.2021 - v2.0.0.9529
  - fix: crash in script block toString()
  - fix: SUITE-1787 fixed crash of IQ decoder symbol decoder on non developer systems
24.09.2021 - v2.0.0.9496
  - add: New Radio Profiles
  - add: ribbon to wrapped spectrum block
21.09.2021 - v2.0.0.9461
  - fix: SUITE-1779 Undocked windows could not be docked (Multi Monitor)
21.09.2021 - v2.0.0.9458
  - fix: Crash when dragging a tab in the default mission
14.09.2021 - v2.0.0.9427
  - fix: SUITE-1759 config of spectrum multi notch filter not saved
14.09.2021 - v2.0.0.9423
  - fix: crash in drone detection for small spectrum sizes
10.09.2021 - v2.0.0.9414
  - fix: new package revision with fixed filetype
08.09.2021 - v2.0.0.9398
  - fix: SUITE-1758 remove stale drone detection on connection lost
06.09.2021 - v2.0.0.9388
  - fix: startup crash with spectrum peaks due to uninitialized variable
03.09.2021 - v2.0.0.9372
  - add: weak occusync patterns to drone detector
  - fix: Crash in ComboView Block
02.09.2021 - v2.0.0.9365
  - fix: Problem with emtpy external DockinUI Monitors
01.09.2021 - v2.0.0.9353
  - fix: Crash when dropping a mission file onto the GraphEditor
  - fix: Delete row / col when the cell was to large
  - fix: Potential crash when clicking on the More button in the RibbonBar
31.08.2021 - v2.0.0.9347
  - fix: SUITE-1754 GPS manual update immediate
30.08.2021 - v2.0.0.9340
  - add: SUITE-1742 Spectrum Multi Notch Filter
  - fix: crash in geo rf histogram if input stream has no antenna information
28.08.2021 - v2.0.0.9331
  - fix: crash in IQ pulse decoder and sweep aggregate blocks
27.08.2021 - v2.0.0.9328
  - fix: RBW in chopper mode IQ to power conversion
  - fix: SUITE-1744 RF Drive Test: adjust default settings
25.08.2021 - v2.0.0.9322
  - fix: Configuration area visible state was overridden from user management
  - fix: crash with marker on time range base traces
25.08.2021 - v2.0.0.9318
  - fix: crash in IsoLOG directional finder block
25.08.2021 - v2.0.0.9312
  - fix: SUITE-1739  No graphs after RTSA-Minimize on some PCs
24.08.2021 - v2.0.0.9300
  - fix: SUITE-1739  No graphs after RTSA-Minimize on some PCs
  - fix: SUITE-1741 "Tab all missions" dont boot with Windows orientation as saved
18.08.2021 - v2.0.0.9282
  - add: 40MHz video channel width for occusync2
  - fix: SUITE-1732 power ramp in V6 pattern generator
  - fix: SUITE-1734 Cell (0,0 1x1) occurs and could not be closed
17.08.2021 - v2.0.0.9276
  - fix: crash in RTSA linux when using a smaller span size in V6
  - fix: crash when changing combine mode of empty reference trace
14.08.2021 - v2.0.0.9268
  - add: SUITE-1713 RF geo Heatmap
  - fix: add check for BOOST connection in Jammer mode of V6
  - fix: SUITE-1732 sweep mode different in Tx pattern and signal generator
13.08.2021 - v2.0.0.9262
  - add: SUITE-1675 Simple channel power for spectrum blocks
12.08.2021 - v2.0.0.9259
  - add: SUITE-1723 Tx control buttons in ribbon
11.08.2021 - v2.0.0.9253
  - add: SUITE-1713 inital heatmap for RF test drive
  - add: SUITE-1729 stream portal block
10.08.2021 - v2.0.0.9250
  - fix: 3D models with polygon list for mav views
04.08.2021 - v2.0.0.9234
  - add: SUITE-1726 IsoLOG sector information with sweep block
  - fix: SUITE-1724  Tab title is only updated after reload mission
03.08.2021 - v2.0.0.9228
  - add: SUITE-1721  Missing AVX needed Error Message
  - fix: SUITE-1722 wrong density in histogram
03.08.2021 - v2.0.0.9223
  - add: support for 184 and 245 MHz Tx calibration
  - fix: 184MHz Tx Profile for V6
02.08.2021 - v2.0.0.9219
  - fix: crash in video monitor when created by script block
29.07.2021 - v2.0.0.9208
  - fix: Better colors for Spectran V6 Modes in the Ribbon
27.07.2021 - v1.5.152.9202
  - fix: Block FunctionHandler was visible in the ConfigItemTree
27.07.2021 - v1.5.152.9199
  - add: Compact / Split WorkMode
  - add: Green BlockGraphEditor special button
  - fix: Better colors for slider bars
  - fix: Linux build
  - fix: Not release blocks after Ctrl+N
  - fix: Possible crash when dragging a block tab
23.07.2021 - v1.5.152.9184
  - add: SUITE-1686 add option to turn of video display if camera feed is lost
  - Bugfix: OffsetBlock ANTENNA_CHANGED Filter - missing []  led to value jumps in the following block
  - fix: declination display in stream debugger
22.07.2021 - v1.5.152.9177
  - add: DockingUI - Direct Resize Docks
21.07.2021 - v1.5.152.9171
  - add: autodetect of QPSK and BPSK decoding in IQ symbol decoder
  - add: Switch between Single / Multi Layout
  - fix: Copy&Paste in Block Editor
20.07.2021 - v1.5.152.9166
  - add: SUITE-1717 Block Graph Editor needs Autoadjust Icon (F5)
  - fix: crash in IQ symbol decoder
17.07.2021 - v1.5.152.9156
  - Bugfix: GNSS Compass - "jumping values" from compass
16.07.2021 - v1.5.152.9145
  - add: DockingUI - 'Locate Block' in context menu
  - add: support for 245MHz Tx pattern generator
  - fix: DockingUI - Potential crash when adding new docks after deleting a row or a column
  - fix: SUITE-1706 continuous position change of IsoLOG in drone detection
14.07.2021 - v1.5.152.9133
  - fix: Crash when dragging a tab outside the dock dock
13.07.2021 - v1.5.152.9128
  - add: SUITE-1710 accept azimuth and elevation on gps inputs
09.07.2021 - v1.5.152.9100
  - add: New DOCKING SYSTEM - initial shot
08.07.2021 - v1.5.152.9095
  - add: altitude and azimuth in JSIQA graph message antennas
  - fix: crash in IQ osci when decoding some symbol types the span across the sample range
07.07.2021 - v1.5.152.9088
  - add: SUITE-1704 show geo location in file reader legend
  - fix: racing condition in V6 config mutex between iso log rotation and normal user operation
  - fix: SUITE.1705 change text color in legend
06.07.2021 - v1.5.152.9083
  - fix: SUITE-1699 elevation discrepancy in RF block due to wrong order of applying declination
  - fix: SUITE-1701 missing segment in sector waterfall
03.07.2021 - v1.5.152.9074
  - add: compass arrow to JSIQA geo map shapes
  - fix: crash in IQ filter with small span direct V6 IQ output
  - fix: SUITE-1697 texture overflow in 3d waterfall with wide spectrum
02.07.2021 - v1.5.152.9068
  - add: color config item to JSIQA
02.07.2021 - v1.5.152.9064
  - fix: crash in IQ filter for small frequencies and large filters
01.07.2021 - v1.5.152.9061
  - add: DC masking to sweep zoom block
  - fix: TX in 122.88 MHz was broken due to 245 MHz tests
30.06.2021 - v1.5.152.9054
  - Bugfix: IsoLog Azimuth
  - Bugfix: IsoLog Azimuth
29.06.2021 - v1.5.152.9047
  - add: SUITE-1699 add elevation config to calibrartion block
  - fix: crash in IQ QAM decoder on type change at start of package
  - fix: locale date in JSIQA
  - fix: SUITE-1695 tabel now drawn if directed graph in same block
  - fix: SUITE-1698 geo location in V6 not propagated if default location
29.06.2021 - v1.5.152.9039
  - add: scaled text and clipped area alignment to canvas2d in JSIQA
  - fix: SUITE-1697 boundary errors in spectrum decimation with 3D Waterfall and scale >= 16
26.06.2021 - v1.5.152.9031
  - fix: problems when using pre decimation > 512 in RTSAAPI dll
25.06.2021 - v1.5.152.9027
  - add: "fsweep" mode for V6 sweep block for full span sweep
  - add: SUITE-1650 selection of multiplexed stream by name instead of index with StreamMerge/Split blocks
  - fix: crash in combining arithmetic block when changing spectrum decimation
24.06.2021 - v1.5.152.9022
  - add: gradient to JSIQA canvas 2D
  - add: new drone video patterns
  - fix: ADC range in V6 health status now in dB
  - fix: spectra DC hiding with enabled amps
  - fix: SUITE-1685 ghost cursor labels in wrapped spectrum
23.06.2021 - v1.5.152.9015
  - add: SUITE-1689 hide DC in V6 Spectrum
  - fix: noise compensation underflow in DC hide for spectra
22.06.2021 - v1.5.152.9011
  - add: IR zoom support for Hikvision cam
18.06.2021 - v1.5.152.9000
  - fix: crash in V6 if sweeping with strage parameter setup
  - fix: limit hikvision tilt to 45 degree
17.06.2021 - v1.5.152.8993
  - fix: SUITE-1688 various crashes with linux
  - fix: unicode decoding in JSIQA unmarshal
16.06.2021 - v1.5.152.8989
  - add: usb memory size expansion for linux to startup script
  - fix: crash of volumetric histograms on linux
  - fix: shutdown V6 usb bulk channels before closing device
14.06.2021 - v1.5.152.8982
  - add: linux support for V6
  - fix: text tabel polygon pre allocation
  - fix: windows build
14.06.2021 - v1.5.152.8976
  - add: raw IQ sample rate measurement sample to sdk
12.06.2021 - v1.5.152.8969
  - add: RawIQ sample for SDK
  - fix: linux build
11.06.2021 - v1.5.152.8965
  - add: libusb for V6 usage
  - fix: inux build
  - fix: linux build
11.06.2021 - v1.5.152.8955
  - add: SUITE-1680 add canvas 2D element to JSIQA
10.06.2021 - v1.5.152.8952
  - add: second control http connection for hikvision
  - fix: SUITE-1682 harmonics range above 6GHz not saved in sweep zoom block
09.06.2021 - v1.5.152.8942
  - add: SUITE-1645 bytes/s stats in http client
  - fix: SUITE-1657 scrubbing in time shift block stopped, if outside of recorded range
  - fix: SUITE-1667 sector selection not saved in waterfall
  - fix: SUITE-1670 add null pointer check for audio output device in audio monitor block
  - fix: V6 reset with new boot code
08.06.2021 - v1.5.152.8933
  - Bugfix: GNSS Compass
  - fix: V6 i2c booted reenumeration of A2 version
08.06.2021 - v1.5.152.8928
  - add: change boot for all V6 devices en block
  - add: receovery microcode for V6 flash
  - add: SUITE-1505 add IQ base WiFi interaction mapper block
  - fix: SUITE-1659 naming of IsoLOG in directional finding block
05.06.2021 - v1.5.152.8913
  - add: flash file backup and restore when changing V6 usb boot mode
  - fix: SUITE-1663 cursor overlay shows in multiple views
  - fix: SUITE-1664 scaling of text field in sector waterfall
03.06.2021 - v1.5.152.8905
  - add: more commands to v6 flash tool
  - fix: SUITE-1661 renamed connectors on antenna segment filter
02.06.2021 - v1.5.152.8901
  - add: info field to directed graph views
  - add: more commands for V6 flash tool
  - add: prepare two stage V6 boot process
  - add: V6 flash tool
  - fix: reset command in V6 killed usb bus with some host controllers
01.06.2021 - v1.5.152.8896
  - fix: crash in pulse detector with spectra > 32k bins
  - fix: crash in wrapped spectrum and histogram trace
29.05.2021 - v1.5.152.8887
  - fix: single antenna drone detection to fire, if second antenna has signal but no direction
28.05.2021 - v1.5.152.8882
  - fix: SUITE-1655  Profiles and Limits need to be crypted
27.05.2021 - v1.5.152.8879
  - fix: Change filetype
  - fix: SUITE-1647 Deleting/changing of a connection inside BlockGraph Editor should not change the arrangement/focus
  - fix: SUITE-391 Default Configuration Width is often to small
27.05.2021 - v1.5.152.8874
  - fix: placement and size of blocks and connectors in incremental graph update
26.05.2021 - v1.5.152.8869
  - fix: graph size on delete block
  - fix: layout of blocks with minimal relayout after connect
  - fix: SUITE-1653 smooth noise floor was reset to 0.2 on stream change
22.05.2021 - v1.5.152.8854
  - fix: DECT decoding with short preamble
20.05.2021 - v1.5.152.8848
  - add: SUITE-1641 add directional beam to geo map marker
  - fix: reference trace with dBmV/m unit
20.05.2021 - v1.5.152.8844
  - add: direction to antenna in script block messages
  - add: sanity checks to frequency profile dialog
  - fix: SUITE-1640 numeric input precision of duration config items
19.05.2021 - v1.5.152.8839
  - fix: SUITE-1615 Watermarks not shown in script blocks
18.05.2021 - v1.5.152.8834
  - fix: initial display of limits with dBmV/m
  - fix: max hold trace in dBmV/m
  - fix: SUITE-1621 power ramp signal generator glitches
15.05.2021 - v1.5.152.8823
  - add: SUITE-1635 temporal gate for period in pulsed waterfall
  - fix: sample and hold and histogram display problems on some AMD graphics cards
  - fix: SUITE-1619 add IP3 text and IP5 markers
  - fix: SUITE-1632 fixed square meter in V/A units
13.05.2021 - v1.5.152.8814
  - add: parameter checks in RTSA API config calls
  - fix: windows build
12.05.2021 - v1.5.152.8804
  - fix: SUITE-1629 enum types not complete in block graph explorer
11.05.2021 - v1.5.152.8801
  - fix: crash with negative frequencies and log frequency scale in spectrum view
11.05.2021 - v1.5.152.8797
  - add: config tree SDK sample
  - add: disabled options bitset to config item info in SDK
11.05.2021 - v1.5.152.8793
  - add: aaronia software license agreement text
  - fix: debug build
  - fix: remove qt header reference in api library
  - fix: windows build
08.05.2021 - v1.5.152.8782
  - add: SDK samples for dll usage
07.05.2021 - v1.5.152.8777
  - fix: SUITE-1626 limit calculation error
07.05.2021 - v1.5.152.8774
  - add: aaroniartsaapi.dll and test
  - add: SUITE-1620 IM Analyzer needs trace control
  - fix: Crash with invalid dock layout mode loaded from mission
  - fix: SUITE-1616 IM Analyzer limited to 3GHz
04.05.2021 - v1.5.152.8759
  - fix: Fixed potential crash in tabwidget
30.04.2021 - v1.5.152.8739
  - add: IQ div, log, exp methods in JSIQA
  - add: SUITE-1610 VSWR measurement with directional coupler and V6 tracking generartor block
  - fix: SUITE-1308 Prio #3 Mission data loading progress bar missing at RTSA bootup
  - fix: SUITE-1522 Spectran V6 Sweep Zoom Block | Missplaced POI adjustment
  - fix: uninitialized variable in V6 streamer causing problems in V6 Device Tester
  - fix: V6 crash with span divide >=64 and spectra output
28.04.2021 - v1.5.152.8729
  - add: silent retries for http client connection requests
27.04.2021 - v1.5.152.8726
  - add: IQ pattern signal generator (experimental)
  - fix: Tx sweep scale calibration update
23.04.2021 - v1.5.152.8714
  - fix: SUITE-1611 frequency rounding error in reference trace for V6 at some frequency bins, e.g. DC
22.04.2021 - v1.5.152.8711
  - add: more logging data
22.04.2021 - v1.5.152.8708
  - add: JSIQA TCP.adapters to get the list of local ip addresses
21.04.2021 - v1.5.152.8704
  - fix: full spectrum in V6 Tx calib mission
  - fix: path of plugin in cyapi package
20.04.2021 - v1.5.152.8697
  - add: Feedback Dialog
  - add: SUITE-1589 second input for signal locator
  - add: SUITE-1596 additional texts and second order channels to channel power measurement block
  - add: SUITE-1608 add missing legends to channel power measurement block
  - fix: Crash in License Manager
  - fix: Linux build
  - fix: SUITE-1187 User Editor - Problems with logout as Administrator
18.04.2021 - v1.5.152.8688
  - add: Manchester encoding in IQ Signal generator for QAM and FSK
  - add: SUITE-1516 ASK to IQ decoder block
  - add: SUITE-1596 channel power measurement
  - add: SUITE-1607 remote control to stream multiplexer block
17.04.2021 - v1.5.152.8683
  - add: markers for power percentile in spectrum
  - add: SUITE-1601 Frequency range follower block and package
16.04.2021 - v1.5.152.8678
  - add: SUITE-1605 add output to spectrum and wrapped spectrum blocks
  - add: tooltips to block graph connectors
  - fix: artefacts with small wide lines that fold back on themselfes, trails in drone detection
15.04.2021 - v1.5.152.8673
  - fix: SUITE-1598 multi spectrum zoom not updating
13.04.2021 - v1.5.152.8658
  - add: SUITE-1588 spectral mask block
  - fix: connection: close response header on http error response
  - fix: SUITE-1600 title and trace legend in histogram
  - fix: SUITE-1603 frequency profile in grid and multi waterfall
12.04.2021 - v1.5.152.8649
  - fix: V6 generator config
12.04.2021 - v1.5.152.8645
  - Update/Fix: Robin Package with modified height input procedure
12.04.2021 - v1.5.152.8641
  - fix: JSIQA UDP pipeline error in QT using forced packet drop of non existing packets
10.04.2021 - v1.5.152.8631
  - add: pattern buffer signal generator to V6
08.04.2021 - v1.5.152.8621
  - fix: SUITE-1599 synchronized file readers in continuous mode with premature ending of synchronized files
08.04.2021 - v1.5.152.8617
  - fix: crash in DDCC transponder (ADSB) target fusion with complex antenna setup
08.04.2021 - v1.5.152.8614
  - add: new FPGA bitfile for experimental pattern generator mode
  - fix: extra whitespace caused wrong AppInfo.xml to be shipped in the portable installer
  - fix: no power warning if feature set would work with limited power budget
  - fix: SUITE-1564 wrong span frequency with POST of IQ data to HTTP Server block
07.04.2021 - v1.5.152.8609
  - fix: debug register access in V6
07.04.2021 - v1.5.152.8606
  - add: documenation for jsiqa http server
  - add: http server to jsiqa
06.04.2021 - v1.5.152.8599
  - add: Power button
  - add: SUITE-1492 USB and power indicators
  - fix: crash on changing properties of a zero size trace in spectrum view
  - fix: JSIQA file seek
  - fix: linux build
  - fix: linux build
  - fix: linux build
  - fix: SUITE-1577 pulsed waterfall marker table not selectable at startup
  - fix: SUITE-1595 ignore duplicate transponder tracks in DDCC
  - fix: use input substream for output in analog video decoder
06.04.2021 - v1.5.152.8586
  - fix: build
  - fix: build
  - fix: string.trim and instanceof in JSIQA
03.04.2021 - v1.5.152.8577
  - add: test code and FPGA for V6 pattern generator
  - fix: SUITE-1590 sample rate limit for analog video decoder block
01.04.2021 - v1.5.152.8570
  - fix: crash in drone detection on network loss
01.04.2021 - v1.5.152.8566
  - fix: Fixed bug / crash in graph editor when deleting a connection
  - fix: SUITE-1594 reduce HTTP message queue overload due to message duplication using unique message ID for deduplication
01.04.2021 - v1.5.152.8562
  - fix: nullptr reference crash in drone tracking if incomming energy stream has no categories
  - fix: SUITE-1243 Power Limits Editor displays the "Ranges" field incorrect and the field is not user friendly
31.03.2021 - v1.5.152.8558
  - add: min/max/sum mode in V6 FFT aggregation
  - add: new V6 firmware fixes Tx zeoring of samples during LO transition
  - add: SUITE-1544  Add new key for Package Creators
  - fix: 3d Osci rendering for large sizes
  - fix: Ribbon value could be changed with the mouse wheel even when it was disabled
  - fix: SUITE-1550  Guidance solution needed if package collision
  - fix: V6 start with high FFT aggregation
30.03.2021 - v1.5.152.8551
  - add: SUITE-1501 Notification/Information is needed when "Portable" RTSA version is installed
30.03.2021 - v1.5.152.8548
  - add: new drone video patterns
30.03.2021 - v1.5.152.8545
  - add: new drone video patterns
  - add: Tooltips for In/Out Connectors in block graph
  - fix: revival of sub stream categories
  - fix: stream/segment start on flush in HTTP connection
  - fix: zero width waterfall
29.03.2021 - v1.5.152.8538
  - fix: prevent infinite loop in drone location detection gradient descent
29.03.2021 - v1.5.152.8535
  - add: ambient occulsion to waterfall and histogram 3D
28.03.2021 - v1.5.152.8532
  - add: V6 comb filter for ~460 MHz for span dividers of 64 and higher using HClock filter
  - fix: accept minPowr and maxPower values in HTTP samples POST endpoint of http server block
27.03.2021 - v1.5.152.8528
  - add: SUITE-1564 stream data into HTTP Server Block using POST request with JSON data
  - fix: JSIQA throw and return of rejected promise in .then()
  - fix: SUITE-1519  License Manager: Incorrect display of licenses with multiple authorizations
  - fix: SUITE-1581  Info Center: Only display relevant "missing key" warnings
26.03.2021 - v1.5.152.8520
  - add: audio alert control button to quick icons in ddcc
  - add: start stop and clear for stream debugger
  - add: SUITE-1578 add optional Cross-Dot grid mode
  - fix: crash in histogram when adding a trace to reference
  - fix: Possible crash when loading a corrupted AppManager.xml
  - fix: SUITE-1573 Add system information to crash dumps
  - fix: SUITE-1586 global audio alert disable in DDCC
  - fix: SUITE-1587 License Manager: "remove" button permanently disabled since 8504
25.03.2021 - v1.5.152.8509
  - add: multiple inputs to stream debug view block
  - fix: 3D Waterfall artifacts with odd size spectra
  - fix: first segment in V6 sweep was sometimes broken
  - fix: remove debug output
23.03.2021 - v1.5.152.8495
  - add: stream debugger/inspector block
  - fix: Remove old unkeyed package versions from public listing
  - fix: removed old unkeyed package versions from catalog
22.03.2021 - v1.5.152.8488
  - add: V6 tracking generator block
  - fix: V6 second startup has wrong RX attenuation level
21.03.2021 - v1.5.152.8484
  - add: Sample and Hold block to script blocks
  - add: Second trace source in spectrum views of script blocks
20.03.2021 - v1.5.152.8481
  - add: offset frequency based IQ generator settings using graph messages
  - add: vertical splitter to pulse waterfall marker table
19.03.2021 - v1.5.152.8473
  - fix: sweep with V6 spectrum output
  - fix: time range of demodulated signal display in IQ Osciloscope
18.03.2021 - v1.5.152.8468
  - fix: SUITE-1574 traces legend in wrapped spectrum view
17.03.2021 - v1.5.152.8463
  - fix: HTTP stream server connection blocked with unresponsive client
  - fix: SUITE-1570 scale parameter not included in response at /stream endpoint of HTTP stream connection
16.03.2021 - v1.5.152.8457
  - fix: no waterfall or realtime spectrum for wide spectra
16.03.2021 - v1.5.152.8454
  - add: negative trigger delay for IQ oscilloscope block
  - fix: crash in V6 when swiching to RX2->RX1 mode
  - fix: racing condition in DSP block scheduling and graph locking due to http connections
  - fix: racing condition of PullPacket and PushFlush
  - fix: SUITE-1569 reference level in auto mode of amps
15.03.2021 - v1.5.152.8448
  - add: complete auto tune in IQ vector scope
14.03.2021 - v1.5.152.8445
  - fix: border cases of waterfall or statistics data
  - fix: clipping problems when resizing waterfall bin count
13.03.2021 - v1.5.152.8441
  - add: new drone video pattern training sets
  - fix: add feature flag to Receiver Band Sequencer package config
12.03.2021 - v1.5.152.8437
  - add: Receiver Band Sequencer package
  - fix: crash in IQ osci when resizing time range
11.03.2021 - v1.5.152.8431
  - fix: use proper licensing filename extension
10.03.2021 - v1.5.152.8426
  - add: autotune for IQ vectorscope
09.03.2021 - v1.5.152.8422
  - fix: licensemanager serial number mismatch
  - fix: Linux build
09.03.2021 - v1.5.152.8418
  - fix: target selection for camera in DDSS
08.03.2021 - v1.5.152.8415
  - add: Option to switch off the shadow in the graph editor
  - fix: fft for non AVX2 systems
  - fix: Fixed problem in RibbonBar menus when calling the same functions successively
  - fix: RibbonBar Changing the frequency by mouswheel wasn't working correctly
08.03.2021 - v1.5.152.8404
  - fix: stopping audio alerts in ddss if interval was too short
07.03.2021 - v1.5.152.8399
  - add: phase shift to IQ vectorscope
  - add: SUITE-1560 autp adjust to IQ blocks
  - add: SUITE-1561 add gird overlay to IQ histogram
  - add: support for local ip address in udp bind multicast for jsiqa
  - fix: closing debug view when stepping through JSIQA
06.03.2021 - v1.5.152.8395
  - fix: crash when shutting down DDCC block while playing alert sound
05.03.2021 - v1.5.152.8392
  - fix: Fix in License manager dialog
05.03.2021 - v1.5.152.8388
  - add: optional audio file alert for drone DDCC
  - add: prepare for isolog integration into V6 virtualizer
04.03.2021 - v1.5.152.8384
  - add: float16 format and optional scale parameter for raw http streaming
  - add: Test rtsakey and license files
  - fix: SUITE-1557 License Manager: Adding .license / .rtsakey files via + button results in chaos until RTSA restart
03.03.2021 - v1.5.152.8367
  - fix: IQ vectorscope
  - fix: startup crash in V6 sweep mode with strong WiFi input connected
01.03.2021 - v1.5.152.8358
  - fix: flush substream and antennacache if filled with more than 100 entries in HTTP connection to avoid memory leaks
01.03.2021 - v1.5.152.8352
  - fix: continuous substream creation in IQ WiFi drone detection block, causing memory leak in master system
01.03.2021 - v1.5.152.8349
  - fix: startup problems with V6 sample rate notch filter if 32x decimation is active
28.02.2021 - v1.5.152.8346
  - add: debugbreak on runtime errors in jsiqa
  - add: stack entries in debugger of jsiqa
26.02.2021 - v1.5.152.8340
  - add: context menu for monitored areas
  - add: enum config items to context menus
  - add: extend alert system for drones in monitored areas
  - add: spectrum notch filter
  - fix: import key file with dialog "+" button
26.02.2021 - v1.5.152.8335
  - add: SUITE-1541 multi carrier power ramp in IQSignalGenerator
  - add: SUITE-1552 circle monitored area
  - fix: JSIQA catch clause without exception argument caused stack corruption
  - fix: stream flush on connect after connection loss in Axis PTZ cam in HTTP mode
25.02.2021 - v1.5.152.8328
  - fix: SUITE-1257  Configuration Dialog: Registering RMIX filetype option is non-functional
24.02.2021 - v1.5.152.8325
  - fix: memory hogging of HTTP stream connection
23.02.2021 - v1.5.152.8321
  - fix: SUITE-1537 Window arrangement will be lost after Reload Mission
22.02.2021 - v1.5.152.8316
  - fix: memory leak in IQ symbol decoder
  - fix: V6 rev A3 startup error due to longer negotiation time for power supply
22.02.2021 - v1.5.152.8313
  - add: new package for default keys
  - add: Update Aaronia_Included_Keys
  - fix: AppPackageUploadInfo.xml of Aaronia Included Keys
  - fix: load and save of ultrawide spectra
  - fix: Package Manager dialog. Brief description wasn't displayed in the info area.
  - fix: Re-Apply Package XML CDATA for Long Descriptions
  - fix: SUITE-1517 Intermodulation analyzer auto function
  - fix: SUITE-1542  Remove "Legacy License Manager"
22.02.2021 - v1.5.152.8302
  - fix: Ribbon bar drag
20.02.2021 - v1.5.152.8297
  - add: Aaronia Keys package. Free included keys
  - add: flags to configitem ValueChanged and SetValue etc.
  - add: Ribbon Bar mouse support
  - fix: Connect to Screen change event
  - fix: script promise catch not returning the correct promise
19.02.2021 - v1.5.152.8282
  - add: recheck licenses to v6 usb manager
  - fix: SUITE-1535 calibration for RX1 and RX2 was not separate for main component
18.02.2021 - v1.5.152.8277
  - add: sanity check to iso log element and sector info
17.02.2021 - v1.5.152.8270
  - fix: SUITE-1529 Connections will be lost after reload mission/installing new RTSA
17.02.2021 - v1.5.152.8265
  - add: FSK and ASK signal encoder
  - fix: IQ oscilloscope data buffer size not correct after small capture duration change
  - fix: vector display in IQ oscilloscope
  - fix: workaround V6 A3 revision USB 2.0 startup problem
16.02.2021 - v1.5.152.8260
  - add: color control to timeshift block
  - add: draggable legends for charts and traces
  - add: title and info text overlay to charts
13.02.2021 - v1.5.152.8252
  - add: SUITE-1517 auto button for intermodulation analyzer
13.02.2021 - v1.5.152.8246
  - fix: V6 recovery crash due to racing condition in firmware reload
12.02.2021 - v1.5.152.8238
  - fix: Invisible input / output connectors won't accept a connection anymore
12.02.2021 - v1.5.152.8235
  - add: more V6 usb error handling
12.02.2021 - v1.5.152.8226
  - fix: Staging Generator FlowSheet improvements
11.02.2021 - v1.5.152.8223
  - fix: SUITE-1523 Blocks in wrong Categories
11.02.2021 - v1.5.152.8220
  - fix: file writer crash with zero sample size
10.02.2021 - v1.5.152.8215
  - fix: SUITE-1524 Change Filename of File Writer block in the File Writer toolbar is not working
10.02.2021 - v1.5.152.8210
  - fix: channel block watchdog for V6 did sometimes not check second channel
10.02.2021 - v1.5.152.8206
  - add: Latest Build email template
10.02.2021 - v1.5.152.8201
  - add: IVI Foundation VISA developer key
  - fix: Package Manager dialog displayed packages even after the key was removed
  - fix: reactivate channel reset for bulk command channels in V6 recovery
09.02.2021 - v1.5.152.8189
  - fix: data errors in V6 if no output connected
  - fix: THD calculation in harmonics analyzer with missing harmonics
07.02.2021 - v1.5.152.8182
  - add: additional result info in harmonic analyzer block
  - add: check for no data at stream start in V6 input streamer
  - add: harmonic selection in harmonic analyzer block
05.02.2021 - v1.5.152.8178
  - add: Added PowerShell script to checkout all package files and their AppPackageUploadInfo.xml
  - add: status table for IQ WiFi drone detector
  - fix: ConfigItemStringList copy missed some entries
  - fix: crash when routing detection status of WiFi Drone detector through HTTP connection
  - fix: linux build
  - fix: linux build
  - fix: Picture for IntelleNet PDU
  - fix: Picture for NRP-Z11
  - fix: Picture for NRQ6 Power Sensor
  - fix: Staging generator
05.02.2021 - v1.5.152.8160
  - add: SUITE-1481 3D Topographic Triangulation Heatmap
04.02.2021 - v1.5.152.8158
  - fix: crash with invalid correction sets
04.02.2021 - v1.5.152.8155
  - add: SUITE-1486 show antenna names in drone info field
  - fix: reading of older drone tracking data from file
04.02.2021 - v1.5.152.8152
  - add: "IQ WiFi Drone Detector" package
  - fix: crash on V6 shutdown due to racing condition with health status
  - fix: FileSystemLayer scan file
  - fix: Migration Task Dialog
03.02.2021 - v1.5.152.8142
  - fix: remove excessive debug logging
03.02.2021 - v1.5.152.8140
  - fix: Block Graph Explorer files
02.02.2021 - v1.5.152.8137
  - add: Spectran V6 Sweep Generator package
  - fix: Data Migration Dialog, test files was written into the wrong folder.
  - fix: jitter in stored spectra snapshots
  - fix: linux build
  - fix: linux build
  - Fix: Missing entries in AppPackgeUploadInfo
02.02.2021 - v1.5.152.8129
  - add: IQ WiFi Drone Detector factory
  - fix: assert in status charts
  - fix: assert in xy status chart
  - fix: SUITE-1434 use wider lines for statistics XY charts
  - fix: SUITE-1503 output of IQ ADSB decoder
  - fix: V6 startup hickup due to synch of USB data and boost channels
01.02.2021 - v1.5.152.8117
  - add: auto spectrum downsampling to histogram block for huge spectra
  - add: implement "step over" await expression in JS async functions
  - fix: improve stop/start stability of V6 block
29.01.2021 - v1.5.152.8095
  - add: WinSCP for Powershell
  - fix: Crash when reading broken crypted files
  - fix: RADA Radar
29.01.2021 - v1.5.152.8078
  - add: AnkCmd
  - add: Help Package
  - add: Package Block Graph Explorer
  - add: Package CyAPI Plugin
  - add: Package DDS Observer
  - add: Package Drone Location Calibration
  - add: Package Drone Thermal Tracking
  - add: Package Drone Video Patterns
  - add: Package Drone Video Traking
  - add: Package Echodyne Echoguard Radar
  - add: Package FLARM Decoder
  - add: Package Flir Radar
  - add: Package Harmonics Spectrum Analyer
  - add: Package Intellinit PDU
  - add: Package Intermodulation Analyzer
  - add: Package IQ ADSB Decoder
  - add: Package IQ Pulse Inspector
  - add: Package IsoLOG 3D Watchdog
  - add: Package IVI Foundation VISA
  - add: Package Map Heathrow
  - add: Package NRP-Z11 Power Sensor
  - add: Package NRQ6 Power Sensor
  - add: Package RADA Radar
  - add: Package RETIA Radar
  - add: Package Robin Radar
  - add: Package Short Burst Suppression Filter
  - add: Package UFO Generator
  - add: Package WIFI SSID Detector
  - add: RTSA_Staging_Generator_v4
28.01.2021 - v1.5.152.8011
  - fix: crash with downscaling odd size large spectra
  - fix: SUITE-1476 show user markers reset after reload
28.01.2021 - v1.5.150.7996
  - add: add some samples to JSIQA documentation
  - add: harmonics and intermodulation analyzer blocks
  - fix: add missing factories
  - fix: reset to default in script blocks
27.01.2021 - v1.5.150.7988
  - add: SUITE-1235 extend FFT size and lower sweep RBW
  - fix: duplicate config items in script block due to colliding chart names
26.01.2021 - v1.5.150.7985
  - add: marker control to JSIQA spectrum chart
  - add: V6 A3 device info flags to dialog
  - fix: prevent loading of images larger than 2GB
  - fix: various sweep issues with borderline RBW and sweep ranges in V6
24.01.2021 - v1.5.150.7979
  - add: send graph message through specific connection in JSIQA
  - fix: change file type of IQ ADSB decoder factory
  - fix: Endless loop while reading enctypted XML
  - fix: file type of block graph explorer factory
  - fix: file type of DDS Observer factory
  - fix: file type of drone location calibration factory
  - fix: file type of drone thermal tracking factory
  - fix: file type of drone video tracking factory
  - fix: file type of IQ pulse inspector factory
  - fix: file type of IsoLOG 3D watchdog factory
  - fix: file type of NRP Z11 power sensor factory
  - fix: file type of NRQ6 power sensor factory
  - fix: file type of short burst suppression filter factory
  - fix: file type of UFO generator factory
  - fix: filetype of intellinet pdu factory
23.01.2021 - v1.5.150.7963
  - fix: file type of sweep zoom factory to binary
23.01.2021 - v1.5.150.7961
  - add: ditone V6 signal generator
  - add: JSON number conversion to config items
  - add: script block spectrum view markers
  - fix: LO leakage calibration timing
  - fix: rbw of sweep zoom block
  - fix: sweep in lower sample frequency modes in sweep zoom block
21.01.2021 - v1.5.150.7956
  - add: dialogs and realtime graph messages to JSIQA
  - add: new power modes to board test function
  - add: SUITE-1457 smooth noise floor in sweep mode
  - fix: enhanced noise floor in IQ power frequency conversion
20.01.2021 - v1.5.150.7953
  - add: enable SO_KEEPALIVE for streaming connections
19.01.2021 - v1.5.150.7947
  - add: 5G Profile Germany
  - fix: thermal glitch in FX3 to FPGA Tx interface
18.01.2021 - v1.5.150.7943
  - fix: filter settings for A3 board revision
18.01.2021 - v1.5.150.7941
  - add: stream statistics table in http client
18.01.2021 - v1.5.150.7937
  - add: 5G Profiles
18.01.2021 - v1.5.150.7935
  - add: V6 board revision A3 FLASH firmware
  - fix: memory leak in sweep mode
16.01.2021 - v1.5.150.7931
  - add: support for V6 A3 revision and 9V power
15.01.2021 - v1.5.150.7928
  - fix: minor drone detection memory leaks
15.01.2021 - v1.5.150.7924
  - add: config for upstream/downstream remote control - fixed performance issue in large DDS mission
  - add: noAA option for RTSA to improve performance on weak systems
  - fix: SUITE-1474 show legend for all views in video grid
  - fix: SUITE-1475 individual camera movement through video grid
14.01.2021 - v1.5.150.7919
  - add: Latency control for FFT and IQ demodulator block
  - add: prepare wifi drone detection
  - add: SUITE-1477 show V6 installed devices
  - add: SUITE-1479 add battery warning to FPGA update message box
  - add: Tx control output for V6
11.01.2021 - v1.5.150.7912
  - add: prepare drone detection infrastructure for MAC based detection
10.01.2021 - v1.5.150.7909
  - fix: crash in config item table with no control items
08.01.2021 - v1.5.150.7905
  - fix: accumulating latency in HTTP connection
  - fix: compression for weak IQ signals
08.01.2021 - v1.5.150.7903
  - add: New RTSAKey for packages
  - fix: rollback FPGA to half rate FFT
  - fix: SUITE-1470 enum config item names changed by remote config
07.01.2021 - v1.5.150.7899
  - add: SUITE-1464 prompt user if FPGA firmware is too old
06.01.2021 - v1.5.150.7895
  - add: fast rate adaption of IQ file compression on stream discontinuities
  - add: layers and antenna segment to jsiqa dsp stream block
31.12.2020 - v1.5.150.7880
  - add: SUITE-1458, SUITE-1444 multi spectrum zoom time compression and trace control
30.12.2020 - v1.5.150.7834
  - fix: SUITE-1448 Packagemanger Icons should be same as Blockgraph Icons
  - fix: SUITE-1459 New Config Setting "Show Minimized at startup"
29.12.2020 - v1.5.150.7822
  - add: new FPGA bitfile re-enables second FFT
  - add: SUITE-1391 automatic selection of source and format of V6 data based on connected outputs
  - add: V6 USB compression setting, move sample mode to debug section
  - fix: gate V6 GPS by feature key
  - fix: volt unit type for V6 IQ output
24.12.2020 - v1.5.150.7811
  - add: housekeeping thread in FX3 firmware to avoid GPS latency
  - add: propagate GPS information from V6 to streams
  - fix: V6 sweep range
23.12.2020 - v1.5.150.7807
  - add: delay on reload microcode to avoid failure due to Fx3 not yet fully booted
  - add: prepare GPS in V6
  - add: prepare V6 GPS
  - fix: crash when searching for blocking dsp block
  - fix: sample accurate placement of stored spectra
22.12.2020 - v1.5.150.7802
  - add: FX3 firmware version check and auto reload at program startup
20.12.2020 - v1.5.150.7797
  - fix: slow sweep speed due to frequent FX3 watchdog clears
20.12.2020 - v1.5.150.7795
  - add: SUITE-1456 Rx Off mode
  - fix: Rx1/2 blocked in some cases due to Rx off changes
18.12.2020 - v1.5.150.7790
  - add: usb abstraction class for V6
  - add: V6 USB channel status fields to ribbon
  - fix: linux build
  - fix: linux build
  - fix: lower and uppercase for V6 serial number
17.12.2020 - v1.5.150.7777
  - add: basic IQ calibration correction in V6 and TeK IQ sources
  - add: RTBW IQ correction block
16.12.2020 - v1.5.150.7775
  - add: Tag Selection Filter for the BlockEditor
16.12.2020 - v1.5.150.7773
  - add: IQ Correction block
  - fix: Layout of the categories
16.12.2020 - v1.5.150.7768
  - add: fast app V6 reset code to prevent startup crash with watchdog due to unresponsive V6
  - add: five second hardware watchdog in V6
  - fix: Crash when floating and redocking
  - fix: linux build
  - fix: SUITE-1379  License Manager: Add keys for "Video Decoder" and "Drone Signal Locator" blocks
15.12.2020 - v1.5.150.7763
  - add: base code for new Hikvision PTZ
  - add: IQ MavLink decoder
  - add: IQ MavLink decoder
  - add: LO harmonics measurements for V6
  - fix: initial axis scale of wrapped spectrum
14.12.2020 - v1.5.150.7757
  - add: far jmup to jsiqa to increase possible code size per function
  - add: MavLink decoder
  - fix: SUITE-1451 added extended hop delay for sweep in compressed float format 92 and 184
13.12.2020 - v1.5.150.7754
  - fix: linux build
12.12.2020 - v1.5.150.7751
  - fix: linux build
  - fix: linux build
11.12.2020 - v1.5.150.7741
  - add: complete customer device test for V6
  - fix: SUITE-1400 Version should be shown on the starting screen of the RTSA
10.12.2020 - v1.5.150.7735
  - fix: V6 status display update
10.12.2020 - v1.5.150.7733
  - add: MavLink decoder
  - add: prepare V6 device test
  - add: severtiy levels to V6 device test responses
09.12.2020 - v1.5.150.7723
  - add: missing packages
  - fix: Fixed annoying 'Save Mission' even when there were no changes. You need to enable / disable Auto Recover in App Configuration dialog.
  - fix: SUITE-1435 Additional block keys needed
  - fix: SUITE-1436  Function packages should be keyed
08.12.2020 - v1.5.150.7714
  - fix: potential crash and flickering in "Time Range" and "Period Buffer" traces
06.12.2020 - v1.5.150.7709
  - add: SUITE-719 add more information to clarify non rotating antennas
05.12.2020 - v1.5.150.7707
  - fix: SUITE-1117 ROC Client lost configuration after restart / ASAP
  - fix: SUITE-1418 Possibility to open a mission without/ with missing keys
04.12.2020 - v1.5.150.7704
  - fix: jsiqa enum item values / script based health status
04.12.2020 - v1.5.150.7702
  - add: context menu for chart axis
  - fix: SUITE-1430 IsoLOG 3D Watchdog package could not be installed if block is in usage
03.12.2020 - v1.5.150.7694
  - fix: SUITE-1117 ROC Client lost configuration after restart / ASAP
03.12.2020 - v1.5.150.7692
  - add: SUITE-1300 save chart offset and scale
  - fix: SUITE-1350 made FPGA bitfile path ephemeral and expert only
02.12.2020 - v1.5.150.7688
  - fix: Case insensitive licenses now correct with serial number
  - fix: SUITE-1411 Spectrum stitcher lower bound to high
  - fix: SUITE-1424 smooth sweep with 92 and 184 MHz
01.12.2020 - v1.5.150.7680
  - add: ddcc mobile key to all keys and developer keys
  - add: RTSA Installler now includes options to install V5 & V6 drivers
  - add: SUITE-1386 add authorization with SpectranV5 and TekRSA
  - fix: SUITE-1392 use separate categories for Paraglider and Hangglider
  - fix: SUITE-1422 Jammer ready state if power off
01.12.2020 - v1.5.150.7672
  - fix: SUITE-1417 ISOLog Segment enable buttons have no function
30.11.2020 - v1.5.150.7665
  - fix: SUITE-1396 zoom to cursor center
  - fix: SUITE-1409 add config to enable offline direction view
29.11.2020 - v1.5.150.7662
  - fix: SUITE-1401 display of scan group in DDCC health status
  - fix: SUITE-1409 cameras sometimes classified as receivers
28.11.2020 - v1.5.150.7658
  - add: SUITE-1402 list of warnings in device health
  - fix: SUITE-1403 Remote Config block in merge/split chain
27.11.2020 - v1.5.150.7651
  - fix: stop antenna rotation if connection lost
27.11.2020 - v1.5.150.7647
  - fix: reclaim unused merged USB command buffers immediately
26.11.2020 - v1.5.150.7643
  - add: additional V6 connection check 5 seconds after startup
  - fix: developer keys for V6
26.11.2020 - v1.5.150.7640
  - add: reference level feature info in V6
  - fix: log message for unordered V6 appearing in USB device tree
26.11.2020 - v1.5.150.7638
  - fix: JSIQA Http get with split body response
26.11.2020 - v1.5.150.7636
  - fix: crash when switching full spectrum with spectra data on the fly
  - fix: remove remote control feature from spectrum sweep block
25.11.2020 - v1.5.150.7623
  - fix: Crash when editing frequency
25.11.2020 - v1.5.150.7621
  - fix: SUITE-1357  Naming of the camera keys should be changed
  - fix: SUITE-1384  RibbonBar will be new arranged after RTSA restart
  - fix: SUITE-1388 user defaults in IQ signal generator
25.11.2020 - v1.5.150.7618
  - fix: add error check when updating RF FPGA without second USB connection
25.11.2020 - v1.5.150.7616
  - add: SUITE-1377 remain shadow health status if http connection is lost
  - fix: crash in JSIQA Object.keys for empty object
  - fix: SUITE-1369 color histogram time filter
25.11.2020 - v1.5.150.7612
  - add: statistics info in stream merger/splitter block
  - add: SUITE-1381 velocity data to ADS-B decoder
  - fix: crash in IQ filter block when changing center frequency
  - fix: FX3 startup problems due to I2C and reset racing condition
  - fix: mouse wheel digit in ribbon
  - fix: SUITE-1354 Package Manager: Unable to remove package with missing license
  - fix: SUITE-1371 Missing 3D image if velocity is zero
  - fix: SUITE-897 Package display in the Package-Manager shows simultaneously "Download" and "Install"
24.11.2020 - v1.5.150.7605
  - add: SUITE-1373 keys to video blocks
  - fix: startup locking problems with too many V6 starting together
24.11.2020 - v1.5.150.7601
  - fix: SUITE-1353 key limiting for V6
  - fix: SUITE-1372 Missing "Connect" button inside Ribbon Bar
  - fix: SUITE-1376 Drone signal locator stops when one input goes AWOL
23.11.2020 - v1.5.150.7593
  - add: store key changes to V6 flash
  - add: SUITE-1353 feature keys for V6
  - fix: ADSB altitude decoding mith q=0 using modified gillham code
  - fix: time based rendering in IQ vector scope
21.11.2020 - v1.5.150.7587
  - add: more 3D models for DDS
20.11.2020 - v1.5.150.7585
  - add: limit V6 clock rate by key
  - fix: device change notification callback for V6 initial firmware load
  - fix: more logging and recovery code for ISO Log
  - fix: SUITE-1365  Settings menu is difficult to open if more than 2 blocks are tabbed in a window
  - fix: SUITE-1368 ignore ISO Log GPS info if mode set to manual
19.11.2020 - v1.5.150.7574
  - add: more logging info in ISO Log rotation thread
  - add: more ribbon buttons for V6
  - fix: SUITE-1356 multi row layout of health status bar
19.11.2020 - v1.5.150.7570
  - Fix: Potentional crash when shutting down a large mission with lots of radar blocks ( or script blocks )
  - Fix: Selected frequency from the Frequency Select Dialog wasn't propagated to the RibbonBar and Freq Edit control
19.11.2020 - v1.5.150.7568
  - add: SUITE-1089 exported traces need system setup
  - add: SUITE-1263 remote config for V6
  - add: support for USB disconnect/reconnect of primary V6 USB connector
18.11.2020 - v1.5.150.7565
  - add: SUITE-1352 start of camera with control sequencer
  - fix: low frequency range sweep filter selection with 92 and 184
18.11.2020 - v1.5.150.7561
  - add: recover V6 from temporary power loss
  - fix: linux build
18.11.2020 - v1.5.150.7556
  - add: beacon type detection in FLARM decoder
  - add: new power control for V6 USB
  - fix: Checkable buttons are now updated correctly after their internal values were changed
  - fix: linux build
  - fix: SUITE-1072 hide special segments
  - fix: SUITE-1339 sparse segments in ISO Log
  - fix: SUITE-1345 removed key protection from V6 block
  - fix: SUITE-1346 The block name inside the Ribbon Bar is not shown completely
  - fix: SUITE-1348 V6 mapping not retained if device enumeration failed or slow
17.11.2020 - v1.5.150.7543
  - add: SUITE-1342 more stats for choppermode in IQ direction spectrum block
  - Fix: Messages in Health Status
  - fix: SUITE-1344 Licensemanager: filename check too strict
  - fix: Typo in RTSAFile.exe help dump
16.11.2020 - v1.5.150.7535
  - add: more stats on USB errors and error recovery
  - fix: SUITE-1341 wrong size in sweep block frequency
15.11.2020 - v1.5.150.7532
  - fix: crash on recursive network error in iso log
15.11.2020 - v1.5.150.7530
  - fix: prevent crash on invalid stream config in cat merge block
14.11.2020 - v1.5.150.7528
  - add: more USB logging in V6
14.11.2020 - v1.5.150.7526
  - Fix: The Up/Down arrow in Ribbon Value Edit wasn't switched off
13.11.2020 - v1.5.150.7524
  - add: SUITE-1337 show script messages within info center
  - add: SUITE-1338 add source location to JSIQA callstack
  - fix: increase progress dialog update rate in RFFPGA programming to avoid watchdog problems
  - fix: linux build
  - fix: linux build
  - fix: Open Mission from file menu won't open in last directory
  - Fix: Problem with large Missions and Script blocks trying to set their titles.
  - fix: SUITE-1332 Sector waterfall shows special sector
  - fix: SUITE-1333 Scaling of sector waterfall
13.11.2020 - v1.5.150.7515
  - add: drop of rtsa files into grapheditor
  - fix: crashes in DDS blocks with unexpected spectra size
12.11.2020 - v1.5.150.7512
  - add: New License Manager
  - add: New Ribbon Bar
  - add: TabWidget's - Added ObjectInfo Areas
  - fix: GraphEditor sometimes lost the snapped connection target when releasing the mouse
  - fix: SUITE-1178  Robin Radar "StartButton" arrangement could not be saved inside ribbon bar
12.11.2020 - v1.5.150.7508
  - add: move reference level with Alt+Mouse on y-axis
  - fix: SUITE-1323 Unidentified noise in directional finding block
  - fix: SUITE-1324 non chopper mode settings greyed out in chopper mode
  - fix: SUITE-1325 antenna segment highlight in chopper mode
  - fix: SUITE-1326 visualization of chopper mode
10.11.2020 - v1.5.150.7504
  - add: icons and alternate text for script block config items
  - add: IQ pulse inspector package
  - add: on the fly change of auto gain control in V6
  - add: RBW control of V6 FPGA
  - add: reference level to V6 ribbon
  - add: second legend in split spectra combo view
  - add: SUITE-1281 show FFT size and window type in legend
  - fix: loading of small IQ files in file source block
07.11.2020 - v1.5.150.7496
  - fix: crash when switching to elevation map with large map image
  - fix: SUITE-1282 markers section in waterfall export
  - fix: SUITE-1307 zero line width for zones in DDCC
  - fix: SUITE-1316 3D Waterfall slow/crashes
  - fix: SUITE-1318 marker function value setting
06.11.2020 - v1.5.150.7490
  - fix: rx channel/fft select
05.11.2020 - v1.5.150.7488
  - add: on the fly stream format change in V6 FFT/IQ
  - fix: ISO log rotation with V6 FPGA spectra
04.11.2020 - v1.5.150.7484
  - fix: SUITE-1309 trails of far away drones off by some meters
02.11.2020 - v1.5.150.7480
  - add: spectra/s stats in V6 status display
  - fix: linux build
  - fix: reset recovery in FX3 code
01.11.2020 - v1.5.150.7477
  - add: auto generate V6 license keys
  - fix: smaller FFT ranges for FPGA FFT now correct
  - fix: span ranges for FPGA FFT
30.10.2020 - v1.5.150.7473
  - fix: crash on USB command recovery
  - fix: workaround for FFT data with only USB1 connected
29.10.2020 - v1.5.150.7467
  - add: more debugging information for USB command streaming
  - add: scaling of summed FFT spectra from FPGA FFT
29.10.2020 - v1.5.150.7464
  - fix: window function for FPGA FFT
28.10.2020 - v1.5.150.7460
  - add: FFT window in FPGA
28.10.2020 - v1.5.150.7458
  - add: frequency profile to JSIQA and V6 zoom pan block
  - add: frequency profile to v6 zoom pan block
  - fix: set config flag for frequency items in new ribbon
  - fix: SUITE-909  Multi monitor usage error
27.10.2020 - v1.5.150.7448
  - add: V6 USB command channel recovery on 0 packet received
27.10.2020 - v1.5.150.7443
  - add: SUITE-1267 health status for multi stream logger block
26.10.2020 - v1.5.150.7432
  - fix: improve handling of dropped packets in IQ demodulation block
24.10.2020 - v1.5.150.7427
  - add: block health status changed by JSIQA script
  - fix: ignore drag custom grid if not using a custom grid
23.10.2020 - v1.5.150.7423
  - add: New icons for the RibbonBar
  - add: SUITE-1291 context menu to start/stop jammer
  - fix: crash in V6 with small sweep lists
  - fix: linux build
  - fix: SUITE-1296 Crash report needs a hint where to add a user scrash report
  - fix: SUITE-1297  Rename window orientation "Default" to "Tab All" and add new symbol
  - fix: Tooltip in BlockEditor stays visible even after the Block was set invisible
  - fix: V5 backward sweep not starting
22.10.2020 - v1.5.150.7411
  - add: large page support for V6 dma buffers
  - add: new FPGA FFT with various sizes
  - add: workaround for broken DMA of PCIe cards with bridge chips
21.10.2020 - v1.5.150.7408
  - fix: SUITE-1287 reference traces with log scale view
  - fix: SUITE-1289 comma and dot mismatch in CSV with semicolon export
20.10.2020 - v1.5.150.7405
  - add: prepare V6 variable FFT size
20.10.2020 - v1.5.150.7403
  - fix: SUITE-1288 spectrum export broken
18.10.2020 - v1.5.150.7399
  - add: center sweep in V6 signal generator
  - add: error message on queue overload for JSIQA blocks
  - add: fast frequency pattern hop in V6
  - add: initial setup test for calibration missions
17.10.2020 - v1.5.150.7396
  - add: shorter duration for generic sweep in V6 signal generator
  - fix: disconnect/connect problems in some V6 due to flaky FPGA status bits
16.10.2020 - v1.5.150.7394
  - add: debug log (syslog) to JSIQA
  - add: prepare center logscale to FFT
  - add: SUITE-1204 source config profile controls in V6 and IQ signal generator
  - add: SUITE-1269 log center and log in FFT and spectrum blocks
  - add: tooltip to JSIQA config items
  - fix: linux build
  - fix: linux build
  - fix: longitude spelling in JSIQA geomap
  - fix: SUITE-1212 cursor range limited to -150dBm
  - fix: SUITE-1221 rename "Show cut off ranges" to "Hide cut off ranges"
  - fix: SUITE-1266 control sequencer start button not reset for immediate action
  - fix: SUITE-1271 file writer does not overwrite file
  - fix: SUITE-1272 bytes written counter jumps at end of file
  - fix: SUITE-1273 file writer compression display
  - fix: SUITE-1277 reference level not reloaded correctly
14.10.2020 - v1.5.150.7379
  - fix: SUITE-1242 Inconsistent order for InfoCenter and Health Monitor symbols in Title- and Statusbar
  - fix: SUITE-1268 Missing icons in ROC Client and ROC Installer
  - fix: SUITE-1274 Not or no longer implemented settings
  - fix: SUITE-1275 Window Autolayouts cause wrong views to be displayed
  - fix: SUITE-1276 Infocenter and Health Monitor symbols should act as toggle buttons
10.10.2020 - v1.5.150.7372
  - add: SUITE-1229 feedback in file writer block
  - fix: send Ack on reset endpoint in FX3 code (experimental)
  - fix: SUITE-1264 noise clipping with low noise floor and high reference level
09.10.2020 - v1.5.150.7368
  - add: use single ended clock input for OCXO
08.10.2020 - v1.5.150.7362
  - fix: improve V6 USB error recovery
07.10.2020 - v1.5.150.7359
  - add: frequency offset to static traces
  - fix: SUITE-1071 wrong sector placement with special element in mix
06.10.2020 - v1.5.150.7356
  - fix: check correct setting for auto-cleaning log files
  - fix: improve recovery on USB connection loss
  - fix: SUITE-1071 disable buttons for disabled sectors in iso log
05.10.2020 - v1.5.150.7352
  - add: file delete and rename to JSIQA
  - add: more control to V6 clock calibration
  - fix: timeout for no power on USB 1
05.10.2020 - v1.5.150.7349
  - add: upload and download of calibration data to V6 eeprom
  - fix: adjust sample rate to clock calibration
04.10.2020 - v1.5.150.7345
  - add: below 10MHz LO power calibration
  - add: front end clock frequency calibration
  - add: LO Leakage and Quadrature error correction Tx calibration
  - add: Status display of calibration data in V6
03.10.2020 - v1.5.150.7343
  - fix: SUITE-1249 reorder buttons in analyzer control bar
02.10.2020 - v1.5.150.7340
  - fix: JSIQA  garbage collection fail on generator functions
01.10.2020 - v1.5.150.7337
  - add: optional zero LO correction block in V6 output path
30.09.2020 - v1.5.150.7334
  - add: SUITE-1238 Tukey window function
  - fix: correction data for IQ preview views
  - fix: SUITE-1240 and SUITE-1241 find control of 3D model in map config xml
  - fix: SUITE-1242    Inconsistent order for InfoCenter and Health Monitor symbols in Title- and Statusbar
29.09.2020 - v1.5.150.7327
  - fix: linux build
28.09.2020 - v1.5.150.7324
  - add: support for calibration in EEPROM
  - add: support for low frequency calibration
26.09.2020 - v1.5.150.7320
  - add: SenseLock USB Dongel support in license manager
  - fix: close and vendor write in cyapi.js
25.09.2020 - v1.5.150.7317
  - add: adaptive sample rates for IQ signal generator and IQ modulator
  - fix: AD9528 mixed clock source initialization order problem
23.09.2020 - v1.5.150.7312
  - add: missing default calibration data for amp
  - add: optional adaption to Tx sample rate in signal generator
  - fix: low level Tx noise due to JESD communication error in FPGA
  - fix: SUITE-1231 oberserver flight path overshooting target
23.09.2020 - v1.5.150.7308
  - fix: crash on focus change
22.09.2020 - v1.5.150.7304
  - fix: correct attenuator requirements in calibration document
  - fix: SUITE-1231 wrong attack path to observer with signal fusion
22.09.2020 - v1.5.150.7300
  - add: Copy Info button in 'About Dialog'
  - add: debug code for JESD symbol error detection
  - add: multitone to V6 signal generator
  - add: power ramp to V6 signal generator
  - fix: Rx filter calibration script block
22.09.2020 - v1.5.150.7297
  - add: accept TCXO config in board eeprom
  - fix: minor hickups during sweep
21.09.2020 - v1.5.150.7294
  - add: independet calibration data for each filter and amp combination in Rx paths
21.09.2020 - v1.5.150.7292
  - fix: calibration and partial spectrum when crossing 6GHz boundary
  - fix: Color coding Undo / Redo
  - fix: linux build
  - fix: SUITE-1219 color coding config broken with non custom modes
  - fix: SUITE-1226 function checkbox in marker now gated by function selection not measured function
20.09.2020 - v1.5.150.7286
  - add: read of frontend config
  - add: support for OCXO and TCXO clocking
19.09.2020 - v1.5.150.7284
  - fix: SUITE-1072 Antenna direction display on map
18.09.2020 - v1.5.150.7279
  - fix: detect and workaround spurious JESD startup errors in V6 all lane mode
17.09.2020 - v1.5.150.7277
  - add: frontend overclock checkbox to debug section
  - add: SUITE-1071 parse ranges of disabled elements
  - add: SUITE-1071 parse special antenna items
  - add: SUITE-1071 reset and silent mode input elements for ISO log
16.09.2020 - v1.5.150.7274
  - add: noise floor compensation
  - add: one more rtbw correction zones for RX
  - add: SUITE-1218 option to rotate marker texts
  - add: thermal noise for noise floor estimation in noise floor calculatuin
  - fix: marker position was wrong if an interpolating reference trace was used as a reference trace in spectrum view
  - fix: spurios first sector in sweep start
  - fix: SUITE-1215 marker labels for spectral density wrong separator
  - fix: SUITE-1216 window type does not change RBW in sweep block
  - fix: SUITE-1222 Sweep recordings with RBW failed
15.09.2020 - v1.5.150.7267
  - add: experimental noise floor extension
  - add: replace and replaceAll to JSIQA string class
  - fix: alternating calibration in 122.88 and 245.76 modes
  - fix: small reference levels caused numeric precision loss in device pipeline, changed base exponent
13.09.2020 - v1.5.150.7264
  - add: SUITE-1198 extend functions to single frequency markers using RBW as width
  - fix: missing checkin
12.09.2020 - v1.5.150.7260
  - fix: DC overcompensating with no DC in spectrum during sweep
  - fix: linux build
12.09.2020 - v1.5.150.7257
  - fix: V6 reference level during sweep was not updated
11.09.2020 - v1.5.150.7255
  - add: normal distributed noise RBW estimate to FFT super sampling
  - fix: display of marker table columns with multiple different markers
  - fix: problems loading blocks with default markers or rtbw range setting
10.09.2020 - v1.5.150.7249
  - fix: SUITE-1203 quick menu tooltips cannot be disabled
  - fix: SUITE-1210 marker pulldowns unusable in wrapped spectrum
09.09.2020 - v1.5.150.7245
  - add: floor overlap mode in spectrum sweep with V6
  - add: multicast UDP support for jsiqa
  - fix: rbw frequency in sweep mode
08.09.2020 - v1.5.150.7241
  - add: RBW FFT bin size mode in IQ Spectrum conversion to ensure even RBW when sweeping different span sizes in V6
  - add: SUITE-1198 add spectram density measurement in cursor and markers in band mode
07.09.2020 - v1.5.150.7237
  - add: RBW FFT mode for IQ FFT conversion block
  - fix: SUITE-1200 RBW in legend and analyzer control disagree
  - fix: SUITE-1201 POI limit in analyzer control and FFT block
05.09.2020 - v1.5.150.7234
  - fix: linux build
  - fix: tracking cal control during sweep
04.09.2020 - v1.5.150.7227
  - add: V6 unit specific calibration data
  - fix: let Set Color Range adjust both sides of the color spectrum
04.09.2020 - v1.5.150.7218
  - fix: memory leak in license manager
03.09.2020 - v1.5.150.7216
  - fix: SUITE-1202 marker table not restored in some blocks
02.09.2020 - v1.5.150.7214
  - add: SUITE-1138 add device serial number and device unique ID check for V6 base licenses
  - add: SUITE-1138 prepare new key management
  - fix: memory leak in license manager with duplicate features
  - fix: release build
  - fix: SUITE-1197 RBW Calculation and display
31.08.2020 - v1.5.150.7198
  - fix: crash when switching calibration data during sweep
31.08.2020 - v1.5.150.7192
  - add: sub grid and widget element for JSIQA custom GUI
30.08.2020 - v1.5.150.7190
  - fix: crash in loading mission with strange marker combination
  - fix: sweep overlap frequency rounding error
28.08.2020 - v1.5.150.7185
  - add: altitude to JSIQA graph messages
  - add: save trace as calibration data
28.08.2020 - v1.5.150.7182
  - add: routing of RX1 and RX2 in mixed channel mode RX1/RX2
  - add: Rx and Tx LED control
  - add: sweeping of both channels in parallel
  - add: TX amd RX led basic support
  - fix: lockup in dual input spectrum block
  - fix: thermal calibration in sweep mode
27.08.2020 - v1.5.150.7179
  - fix: linux build
26.08.2020 - v1.5.150.7177
  - fix: limit file rotation to start at one
  - fix: reordering of traces and commands in command sequencer
  - fix: workaround message loss with ASMedia USB controllers and Microsoft drivers during sweep
25.08.2020 - v1.5.150.7171
  - fix: SUITE-1189 switch from QSaveFile to manual name mangling
  - fix: SUITE-1190 multi stream logger does not respond to command sequencer
24.08.2020 - v1.5.150.7161
  - Fix: Timeout in receive and reconnect-problem solved
23.08.2020 - v1.5.150.7158
  - add: gradient descent optimization of Tx equalizer
17.08.2020 - v1.5.150.7144
  - add: SpectranV6 Sweep Zoom Package
  - fix: inputs of Spectran V6 Sweep Zoom block
16.08.2020 - v1.5.150.7139
  - add: board revision detection for V6
  - fix: linux build
  - fix: linux build
  - fix: small span sweep mode
15.08.2020 - v1.5.150.7134
  - add: IVI visa library for JSIQA
  - add: NRP-Z11 block
  - add: V6 calibration missions
14.08.2020 - v1.5.150.7129
  - add: drop overlap samples in power spectrum FFT on packet loss
  - fix: app lockup on USB connection lost during streaming in V6
  - fix: V6 racing conditions for 32bit register reads from FPGA
13.08.2020 - v1.5.150.7123
  - fix: dword register read in FPGA during high FX3 load
12.08.2020 - v1.5.150.7119
  - add: device node change notification to V6 device manager
  - fix: linux build
  - fix: multi V6 firmware load
11.08.2020 - v1.5.150.7109
  - add: mblaze source with THz optimizations
  - add: Spectran V6 device manager
  - fix: SUITE-1186 propagation of azimuth through calibration block
10.08.2020 - v1.5.150.7103
  - add: async lambda to JSIQA
  - add: optional chaining and nullish coalescing to JSIQA
  - add: SCPI client class to JSIQA
  - add: timeout for JSIQA tcp and udp receive
  - fix: delayed message return in JSIQA
  - fix: exception handling JSIQA async/await calls
09.08.2020 - v1.5.150.7101
  - fix: SUITE-1175 Sub chapter Antennas in Map Overlay should be renamed into Sensors
08.08.2020 - v1.5.150.7099
  - add: async and await to JSIQA
  - add: reset button for tek rsa306 block
  - fix: SUITE-1182 ingore single detection was overzealous and started to include radar detected drones
07.08.2020 - v1.5.150.7092
  - Fix: JIRA case 1177
  - fix: SUITE-1179 Antenna name change of radar blocks
  - fix: SUITE-1180 Radar target classification wrong
  - fix: SUITE-1181 control commands propagated via merge and split blocks
06.08.2020 - v1.5.150.7086
  - add: generator functions and yield to JSIQA
04.08.2020 - v1.5.150.7083
  - add: SUITE-1144 write jammer usage to log
  - fix: rename async to Async in jsiqa
03.08.2020 - v1.5.150.7079
  - add: sample for IQ streaming via REST API
02.08.2020 - v1.5.150.7077
  - fix: AGC for Flarm decoder
01.08.2020 - v1.5.150.7075
  - add: log message if AxisPTZ connection fails to shutdown
  - fix: crash with integer sliders and zero size range
  - fix: memory leak in analyzer remote control of spectrum and combo view
  - fix: vanishing default traces in spectrum view
31.07.2020 - v1.5.150.7069
  - add: NRQ6 power sensor block
28.07.2020 - v1.5.150.7060
  - add: SUITE-1166 Watchdog should provide notification to user if it terminates the RTSA
27.07.2020 - v1.5.150.7055
  - add: area fill to static XY charts
  - fix: chart axis in IQ histogram
  - fix: timing in IQ demodulator for time discontinuities
25.07.2020 - v1.5.150.7052
  - fix: crash in jammer remote detector
  - fix: Lock WatchDog for long lasting system file dialog operations
  - fix: SUITE-1125 marker setting order
24.07.2020 - v1.5.150.7046
  - add: basic signal generator for V6 Tx path
  - add: new FPGA bitfile fixing Tx startup issue
  - fix: dual channel RX streaming modes
23.07.2020 - v1.5.150.7039
  - add: simple signal generator mode to V6 block
  - fix: linux build
  - fix: slider for large number ranges
  - fix: SUITE-1161 mirror in frequency profile
  - fix: vector display in IQ oscilloscope
22.07.2020 - v1.5.150.7034
  - add: padding for V6 chart area
  - fix: clock recovery for http server client time synchronisation
  - fix: SUITE-1162 reading of attenuator calibration data
  - fix: touch support for IQ oscilloscope
21.07.2020 - v1.5.150.7029
  - add: 122.88MHz support for Tx fast jammer
  - add: new V6 FPGA firmware
21.07.2020 - v1.5.150.7025
  - Add: RadarDecoder ImageBuild
  - add: support for 122.88MHz TX
  - add: V6 short latency jammer mode
20.07.2020 - v1.5.150.7021
  - add: active jammer preparation
  - add: pulldown buttons to in block view button set
  - add: synchronize V6 Tx and Rx channels
  - fix: Frequency Control colors weren't updated correctly
17.07.2020 - v1.5.150.7005
  - add: Added new Linux Installer Framework 3.2.2
  - fix: OpenGL version check at program start
  - fix: SUITE-1160 save of regions in DDCC broken
16.07.2020 - v1.5.150.6996
  - fix: crash due to mismatching stream and meta stream when restarting cam on sat
  - fix: removed debug output
15.07.2020 - v1.5.150.6993
  - fix: RTSA Startup shell script for Linux now installs missing xinerama package and checks for root permissions
15.07.2020 - v1.5.150.6986
  - fix: timing precision of IQ sample packets in V6
14.07.2020 - v1.5.150.6984
  - add: multi input IQ scope
  - add: new device clock for V6
13.07.2020 - v1.5.150.6978
  - fix: linux build
  - fix: linux build
  - fix: linux build
12.07.2020 - v1.5.150.6974
  - add: more quick menu entries for combo and file reader block
  - add: use axis chart config for time stats views
11.07.2020 - v1.5.150.6972
  - fix: crash when adding multi spectrum zoom
  - fix: crash with undo of config item after redo of block delete, when item was added manually using AddGroupItems
  - fix: display order of axis and curve in colormap
  - fix: remove hover on touch up
10.07.2020 - v1.5.150.6967
  - fix: SUITE-1156 vertical layout of views blocked by quick menu height
09.07.2020 - v1.5.150.6964
  - add: header and compression mode for TX channel
09.07.2020 - v1.5.150.6962
  - fix: drone probability waterfall not displayed in drone detection block
  - fix: SUITE-1154 UDP port blocked when reloading JSIQA block
  - fix: SUITE-1155 position information not accurate with V5 frequency hopping
09.07.2020 - v1.5.150.6957
  - add: Spectrum Analyzer control elements to spectrum and combo view
  - add: SUITE-1075 Default settings for common config Items in Blocks in Configuration Dialog
  - add: SUITE-1151 Highlight settings that have been changed by the user
  - fix: SUITE-1137 Color and font settings permanently disabled in View menu
08.07.2020 - v1.5.150.6953
  - fix: toString in ConfigItemFloat
07.07.2020 - v1.5.150.6949
  - add: data table block
06.07.2020 - v1.5.150.6945
  - add: horizontal scrolling to text tables
  - fix: initial display of invalid rate in legend
05.07.2020 - v1.5.150.6942
  - add: break command for jsiqa serialport
04.07.2020 - v1.5.150.6939
  - add: complete 2nd input channel for combo view
03.07.2020 - v1.5.150.6934
  - add: second input for combo views
  - add: second spectrum input to spectrum block
  - add: undo to config item dialog
  - fix: crash in signal generator when using raster image generator without an image
  - fix: linux build
02.07.2020 - v1.5.150.6927
  - fix: Linux openGL
  - fix: merge of config items with different types
  - fix: SUITE-1149 Problems with fonts at RTSA installation. Packed the fonts into a zip archive
01.07.2020 - v1.5.150.6913
  - add: thermal calibration for V6
  - add: view selection in quick icon menu of combo box
  - fix: playback problems with file reader
  - fix: SUITE-1147 display of POI and rate in waterfall and combo
30.06.2020 - v1.5.150.6907
  - add: context menu for script block
  - add: frequency panning in 3D charts
  - add: outline and depth shadow 3d rendering options
  - add: some more quick menus
  - fix: build
  - fix: SUITE-1147 calculation of latency parameter now based on packet arrival, not display time
29.06.2020 - v1.5.150.6902
  - add: more context menus
  - fix: solid pixel shader with shadow parameter in 2D
29.06.2020 - v1.5.150.6899
  - add: context menu to color palette and tables
  - fix: linux build
28.06.2020 - v1.5.150.6896
  - add: add traces context menu
  - add: context menu for rtsa chart blocks
  - fix: length parameter for cyapi read vendor
  - fix: linux build
  - fix: linux build
  - fix: linux build
  - fix: SUITE-1145 scaling with linear power range
27.06.2020 - v1.5.150.6888
  - add: cyapi plugin javascript interface classes
  - add: plugins folder to common factory data structure
27.06.2020 - v1.5.150.6886
  - add: cypress USB plugin library for jsiqa
25.06.2020 - v1.5.150.6877
  - add: SUITE-1141 Yuneec H520 integration
  - fix: drone detection for non directional antennas
  - fix: missing init in config items
  - fix: SUITE-1143 remote camera wiper control
24.06.2020 - v1.5.150.6871
  - add: Block Graph Explorer package
  - fix: SUITE-1142 Problems with RTSA font installation. Installer tried to be clever and set the fonts to auto registration
23.06.2020 - v1.5.150.6868
  - add: tx and rx attenuation calibration
  - fix: SUITE-1140 handling of transparency setting in quick menu
22.06.2020 - v1.5.150.6865
  - add: IQ euqalizer for Tx filter compensation
  - add: XY charts for script blocks
  - fix: crash due to not cleared popup menu map
20.06.2020 - v1.5.150.6861
  - fix: crash in sweep block when changing frequency range
19.06.2020 - v1.5.150.6859
  - fix: cascading of sweep blocks
  - fix: timer explosion in frequency edit control
17.06.2020 - v1.5.150.6853
  - add: more statistics with V6 info panel
16.06.2020 - v1.5.150.6851
  - -Bugfix: Traces Tooltip/Menu corrections
15.06.2020 - v1.5.150.6847
  - add: statistics for V6 transmitter channel
  - add: Tx attenuation settings
14.06.2020 - v1.5.150.6844
  - Add: RF-FPGA Support for TX Amplifier
11.06.2020 - v1.5.150.6835
  - add: 92MHz Tx profile
  - add: iq input connector and output stramer to V6
  - bugfix: Localization Problem German/Arabic solved
  - fix: V6 stream output
11.06.2020 - v1.5.150.6828
  - add: test ramp for Tx
11.06.2020 - v1.5.150.6826
  - add: SUITE-599 change camera cone color in file reader
10.06.2020 - v1.5.150.6823
  - add: shadows and specular highlights to 3d charts
  - fix: SUITE-946 alpha channel for camera cones
09.06.2020 - v1.5.150.6819
  - fix: crash when deleting packet type with size zero (http sector jammer)
08.06.2020 - v1.5.150.6813
  - add: more extensions for comboview
07.06.2020 - v1.5.150.6811
  - add: enable single sample traces (e.g. max hold) as reference trace in spectrum
  - add: power side view for waterfall in combo view
  - add: reference trace view in combo
  - fix: marker calculation in waterfall with small frequency span (less than min distance)
06.06.2020 - v1.5.150.6806
  - add: center and span frequency to V5 config set for control sequencer
  - fix: line edit change with auto complete
  - fix: SUITE-1110  Strings with non-Ascii characters are not displayed properly on Linux
  - fix: SUITE-1133 add missing fields in camera commands via HTTP connection
04.06.2020 - v1.5.150.6797
  - fix: meta data transport via http and storage in files
04.06.2020 - v1.5.150.6794
  - add: Added new RTSA command line argument: - InteractiveGUI
  - fix: display of old video files
  - fix: SUITE-1132 moved max mode above numeric inputs, and fixed visibility
04.06.2020 - v1.5.150.6790
  - fix: end of stream handling in trigger block
03.06.2020 - v1.5.150.6787
  - fix: crash in display of large profiles
  - fix: crash when clicking on channel in frequency profile
  - fix: re-activate area build in condition block and combo view
03.06.2020 - v1.5.150.6780
  - fix: border flicker when activating or deactivating window
  - fix: drop areas of docking windows
02.06.2020 - v1.5.150.6774
  - fix: double click selection in script editor
01.06.2020 - v1.5.150.6770
  - add: video monitor grid block
  - fix: inactivate control buttons in video monitor while dragging
31.05.2020 - v1.5.150.6763
  - add: SUITE-1093 keyboard controls for navigation in video monitors
  - fix: spikes in wide lines
30.05.2020 - v1.5.150.6761
  - fix: flickering in resizing window due to borderless
  - fix: reactivate shadow in borderless windows
  - fix: workaround invalid window border settings on screen change
28.05.2020 - v1.5.150.6752
  - add: SUITE-1027 load progress indication for map and model load
  - fix: SUITE-808 reset geo cut coordinates to map center on change to visible
  - fix: windows build
27.05.2020 - v1.5.150.6748
  - add: config menu to marker table
  - add: frequency hopping to IQ pulse signal generator
  - add: IQ Modulator block
25.05.2020 - v1.5.142.6740
  - add: low pass filter for FFT/sec display
  - add: splitter for waterfall marker coressection display
  - fix: click on trace legend
  - fix: SUITE-1125 inconsistent order of marker settings
  - fix: SUITE-1126 marker settings using X/Y/Z
24.05.2020 - v1.5.142.6737
  - fix: SUITE-1054 Panorame Image height in Sector Waterfall
23.05.2020 - v1.5.142.6735
  - add: spectrum resample DSP block
  - add: UDP sockets to JSIQA
  - fix: alignment of IQ demodulator output packets
22.05.2020 - v1.5.142.6732
  - fix: IQ demodulation filter preview for small frequencies
21.05.2020 - v1.5.142.6730
  - fix: filter out of range demodulation requests in IQ demodulation block
  - fix: reactivate zero packets for sweep
20.05.2020 - v1.5.142.6727
  - add: V6B TX startup JESD config
20.05.2020 - v1.5.142.6725
  - add: graph message filter in jsiqa
  - add: stack overflow error in jsiqa
  - fix: flicker of sample and hold trace when panning frequency
19.05.2020 - v1.5.142.6717
  - fix: SUITE-1084 RTSA starts with zoomed overlay on ribbon bar
  - fix: SUITE-1124 ROCClient crashs when opening configuration.
19.05.2020 - v1.5.142.6714
  - add: SUITE-1119 Record button for multi stream logger in ribbon
  - fix: Crash in segment detector block if incomming stream has no antenna info
  - fix: SUITE-1122 cursor axis names for histogram volumetric
  - fix: SUITE-1123 inconsistent block connectors in editor and toolbox
18.05.2020 - v1.5.142.6709
  - fix: Crash when starting the RTSA initially on a system
18.05.2020 - v1.5.142.6704
  - fix: horizontal scroll wheel usage with alt key
16.05.2020 - v1.5.142.6692
  - add: export of IQ data from oscilloscope
  - add: Radar documentation, sdks and samples
  - fix: SUITE-1120  Disabled slide controls of parameter inputs after interrupted manual entry
  - fix: SUITE-6665 no data transport of structured data via HTTP
15.05.2020 - v1.5.142.6684
  - add: conversion to mp4 with video import tool
  - fix: TX int format issue
14.05.2020 - v1.5.142.6680
  - add: TX Testtone for V6
14.05.2020 - v1.5.142.6676
  - fix: startup problem with timeshift block and IQ data
  - fix: V6 stream time problem in debug mode
13.05.2020 - v1.5.142.6673
  - add: FFT merge modes for V6
  - fix: new FPGA with correct FFT IDs
  - fix: stream statistics block
  - fix: V6 FFT aggregation power correction
13.05.2020 - v1.5.142.6665
  - fix: binary arithmetic spectrum processing of streams with different sample rate and bin size
  - fix: crash when connecting combo view to non spectrum data
  - fix: overlap handling of sidebar in DDCC
  - fix: timing problem in V6 on dropped samples
12.05.2020 - v1.5.142.6658
  - add: RTSA will now present a dialog with possible command line options when starting it from a console with '-help'
  - fix: crash when attaching wrong stream type to jammer input of DDCC
  - fix: SUITE-1115  ROC App restarts RTSA not with "mission" parameter
  - fix: timing and power offset for V6B FFT
11.05.2020 - v1.5.142.6651
  - add: decimation for V6B FPGA FFT
10.05.2020 - v1.5.142.6649
  - add: quick menu to multispectral 3D
  - fix: multi spectral half band shoulder alias region
  - fix: SUITE-1092 remove display of video drone icons on wrong cameras
09.05.2020 - v1.5.142.6645
  - fix: crash when loading DAE model with line elements
  - fix: SUITE-1048  Big logfiles should not be compressed to be used for crash dump
08.05.2020 - v1.5.142.6640
  - add: quick buttons for IQ oscilloscope
  - fix: read V6 FPGA version register twice during startup to flush UART
07.05.2020 - v1.5.142.6638
  - add: config dialog for legend box
  - add: config dialog for traces in spectrum view
  - add: FPGA code for V6 FFT
  - fix: RTBW correction block
06.05.2020 - v1.5.142.6633
  - add: V6B FPGA FFT
  - fix: IQ scope scaling
06.05.2020 - v1.5.142.6627
  - fix: closures in JSIQA debugger
  - fix: Fixed crash in ROCInstall
  - fix: linux build
  - fix: shutdown crash due to watchdog caused by long timeout in http server waiting for encrypted connection
06.05.2020 - v1.5.142.6621
  - add: ConfigItemGroup dialogs
  - add: JSIQA debugger
05.05.2020 - v1.5.142.6617
  - fix: new V6B FPGA compression format register value
04.05.2020 - v1.5.142.6614
  - add: multi stream with V6B new FPGA
01.05.2020 - v1.5.142.6607
  - add: new V6 stream protocol
  - add: temperature information to V6 health status
  - fix: crash in JSIQA due to Objects.keys() method
  - fix: SUITE-1113 bands marker mode in combo view
30.04.2020 - v1.5.141.6599
  - fix: Wrong colors in DataMigration dialogs
30.04.2020 - v1.5.141.6593
  - add: reference line to spectrum view
  - fix: attenuation setting in V6 for GA float types and attenuation less than minus 18
28.04.2020 - v1.5.141.6585
  - add: reference trace based view in spectrum block
25.04.2020 - v1.5.141.6581
  - fix: undo and unit conversion when editing float config items
25.04.2020 - v1.5.141.6578
  - add: contiguous sweep mode to IQ signal generator
24.04.2020 - v1.5.141.6575
  - fix: add missing files for build
24.04.2020 - v1.5.141.6573
  - add: new FPGA protocol support for V6
23.04.2020 - v1.5.141.6570
  - add: trigger hysteresis to IQ oscilloscope block
  - fix: aspect ratio in vector views
  - fix: filter correction for on the fly filter change in V6
  - fix: offset based marker frequencies
  - fix: SUITE-951 crash when using remote config
21.04.2020 - v1.5.141.6562
  - add: support for sweep with halt and quarter rbw size
18.04.2020 - v1.5.141.6553
  - add: Alt+ and Alt- for zoom in and out on the frequency axis
17.04.2020 - v1.5.141.6547
  - fix: crash in channel power accumulation if no channel is specified and mode is merge
  - fix: crash in time erosion for wide spectra
  - fix: prevent crash with uninitialized bearing text in DDS
16.04.2020 - v1.5.141.6542
  - add: inverse ADC compensation
15.04.2020 - v1.5.141.6530
  - fix: linux build
14.04.2020 - v1.5.141.6523
  - fix: IQ file compression for odd packet sizes
12.04.2020 - v1.5.141.6519
  - add: direct IQ based AM/FM decoding
09.04.2020 - v1.5.141.6513
  - fix: crash with marker and limits
08.04.2020 - v1.5.141.6511
  - fix: V6 preamp autoselect in sweep mode
07.04.2020 - v1.5.141.6501
  - fix: SUITE-1103  Wrong background color in frequency profil selection dialog
  - fix: workaround for 8.3 gain control update
04.04.2020 - v1.5.141.6491
  - add: processing packet flags from V6 to downstream blocks for IQ post processing
  - fix: crash in IQ symbol decoder
02.04.2020 - v1.5.141.6487
  - add: harmonics for markers
  - add: implement markers for wrapped spectrum
  - fix: Config Item Tree Folder icons were swaped
  - fix: SUITE-1097 ROC App view has display problems
30.03.2020 - v1.5.141.6478
  - add: automatic sample format and frequency range detection in V6B based on sample rate, filter and decimation setting
  - fix: memory consumption problem with multi span sweeping
29.03.2020 - v1.5.141.6474
  - add: experimental notch filter for 122.88MHz removal in V6B
  - fix: power bin aggregation mode in spectrum sweep for variying FFT sizes
28.03.2020 - v1.5.141.6472
  - add: Decimating IQ modes for Spectran6B
25.03.2020 - v1.5.141.6467
  - add: temperature fan control for V6B
  - fix: memory leak in reference traces
  - fix: on the fly amp change reflects in RF correction curve
24.03.2020 - v1.5.141.6465
  - add: FPGA bitstream with zeroed out data during PLL locking
  - add: more window functions for FFT
  - fix: hardmax interpolation in traces
  - fix: linux build
  - fix: sample limit in reference trace
23.03.2020 - v1.5.141.6457
  - fix: SUITE-1096  CrashReport could not be send because its shifted and cannot be moved
23.03.2020 - v1.5.141.6454
  - add: V6 calibration mission
  - fix: workaround 8.3 bit float startup problem in V6 FPGA
22.03.2020 - v1.5.141.6450
  - add: first set of filter correction coefficients for V6B
  - fix: numeric entry in cursor frequency sprites
  - fix: V6B power workaround
21.03.2020 - v1.5.141.6445
  - fix: add workaround for V6B power up problem
19.03.2020 - v1.5.141.6440
  - fix: CL-1087 DDCC wrong camer assignment
  - fix: SUITE-1095 Error dialog is placed behind the splash image
19.03.2020 - v1.5.141.6437
  - add: prepare peak/marker mosaic display
  - add: SUITE-1089 system config info in traces
  - fix: crash in DDCC when rotating alert zones with active drones
18.03.2020 - v1.5.141.6424
  - add: New RTSA WatchDog feature
  - fix: SUITE-1090  Mission could not be saved if Non-Interactive GUI (NIG) is enabled
16.03.2020 - v1.5.141.6418
  - add: Added Spectran V6 driver files to the installer
  - add: Fixed an problem when installing the RTSA on a fresh system
13.03.2020 - v1.5.141.6407
  - fix: max traces samples was limited to 4k, now 32k
13.03.2020 - v1.5.141.6402
  - fix: Fixed an issue where the DataProtection dialog pops up behind the SplashScreen
12.03.2020 - v1.5.141.6398
  - add: block icons and background images
  - add: New menu items under '?': Feedback / Send us a Smille / Send us a Frown / Send us your CrashReports
  - add: New menu items under 'Extras/Data': Open DataFolder CrashReports
  - fix: lambert shader with 3D models in map view
  - fix: SUITE-887 hide unneeded parameters in binary arithmetic block
12.03.2020 - v1.5.141.6392
  - fix: RX2 filter settings in RFFPGA microcode for V6
  - fix: SUITE-1085 drone video position not updated if DDCC closed
11.03.2020 - v1.5.141.6389
  - add: filter settings and amp for V6B
  - add: SUITE-1063 add marker delta display for Spectrum, Waterfall, Comboview and Pulsed Waterfall
  - fix: filter settings for RF FPGA V6B
  - fix: linux build
10.03.2020 - v1.5.141.6383
  - add: FPGA programming with V6B
  - add: triggerline to IQOscilloscope
  - fix: SUITE-1081 Block Graph Editor has black content in view area
09.03.2020 - v1.5.141.6378
  - fix: Fixed potential application crash
08.03.2020 - v1.5.141.6375
  - fix: incomplete checkin
  - fix: IQ oscilloscope reallocate of buffers
07.03.2020 - v1.5.141.6372
  - add: V6B JTAG for RFFPGA
  - fix: SUITE-1081  Block Graph Editor has black content in view area
  - fix: SUITE-1083 Mission Reload function does not work for 'Factory Missions'
06.03.2020 - v1.5.141.6364
  - fix: comsume all but single type data in rtsa chart block
  - fix: missing checkin
05.03.2020 - v1.5.141.6356
  - add: FPS/s and FPS annotation to legend
  - add: SUITE-1079 add visibility and activation control to user markers on map
  - fix: SUITE-1077 tooltip placement of quick menu
  - fix: typo in GPS block
04.03.2020 - v1.5.141.6351
  - add: SUITE-1068 rest authentication with RTSA user manager
  - fix: crash in spectrum reference chart when chaning spectrum size on one input
  - fix: dB display in spectrum reference chart
02.03.2020 - v1.5.141.6344
  - add: SUITE-1073 tilt offset for axis ptz
  - fix: crash when selecting limit lines without ranges
  - fix: QAM decoder in IQ symbol decoder
  - fix: SUITE-1074 quick menu not retained when auto hide is off and cursor leaves view
  - fix: vanishing constellation in IQ osci
01.03.2020 - v1.5.141.6339
  - add: more window functions for FFT e.g. Kaiser window
  - add: POI display in trace legend
  - fix: SUITE-819  Graph Editor should not scroll after block deletion
29.02.2020 - v1.5.141.6335
  - add: spectrum reference block
  - fix: extend image object tracking meta data packet size to avoid buffer overflow
  - fix: vanishing decodes at end of stream in IQ osci
28.02.2020 - v1.5.141.6328
  - add: HTTP priviledges
27.02.2020 - v1.5.141.6321
  - add: 16 bin FFT to IQ to Spectrum block
24.02.2020 - v1.5.141.6315
  - fix: V6B FPGA JESD initialization
23.02.2020 - v1.5.141.6312
  - add: shockburst protocol decoder
  - add: SUITE-456 SNR to Spectran V5 and RSA306 blocks in block graph editor
22.02.2020 - v1.5.141.6309
  - fix: odd samples dropped in IQ demodulation block
21.02.2020 - v1.5.141.6296
  - fix: clock output settings for V6B
21.02.2020 - v1.5.141.6294
  - add: IQ symbol decoder to script blocks
19.02.2020 - v1.5.141.6284
  - add: auto detect IQ symbol decoder
  - fix: crash when disconnecting Axis cam
17.02.2020 - v1.5.141.6279
  - add: Spectran V6B for FPGA development
17.02.2020 - v1.5.141.6277
  - add: GSM to IQ symbol decoder
  - add: status and last error info to Axis PTZ cam
16.02.2020 - v1.5.141.6271
  - fix: start/stop of axisptz rtsp tcp transport
16.02.2020 - v1.5.141.6268
  - add: use pan and tilit speed settings for exavision
14.02.2020 - v1.5.141.6264
  - add: SUITE-1041 add flexible chopper control with CL1041
  - fix: visibility/label order when adding iso log segments to ribbon
13.02.2020 - v1.5.141.6261
  - add: WiFi protocol decoder to IQ oscilloscope
10.02.2020 - v1.5.141.6257
  - add: audio monitor block
08.02.2020 - v1.5.141.6254
  - add: detectors to IQ oscilloscope
  - fix: network access problem in Qt when no internet
02.02.2020 - v1.5.140.6239
  - add: prepare IQ protocol decoding e.g. BTLE in IQ scope block
29.01.2020 - v1.5.140.6231
  - add: SUITE-1041 flexible chopper mode rate
  - fix: SUITE-951 incomplete enum values in JSON for remote control endpoint
  - fix: SUITE-952 placement of drone icons in video monitors if drones are behind the camera
28.01.2020 - v1.5.140.6227
  - add: licensekey endpoint to HTTP stream server
  - add: zoom support for exavision cam
  - fix: crash with invalid pilot indices in IQ histogram block
26.01.2020 - v1.5.140.6222
  - add: basic pan and tilt on exavision cam
25.01.2020 - v1.5.140.6220
  - add: capture video with Exavision CAM RTSP
24.01.2020 - v1.5.140.6218
  - add: initial exavision PTZ classes
  - add: sample precise trigger in IQ oscilloscope
22.01.2020 - v1.5.140.6211
  - add: drone location calibration package
  - add: SUITE-264 RBW based FFT size and non power of two FFT sizes in IQ to Spectrum block
  - add: SUITE-944 RADA Radar support
  - fix: crash with large IFFT (e.g. sweep and pulsed waterfall)
21.01.2020 - v1.5.140.6206
  - add: SUITE-376 show marker trace source color in marker table
18.01.2020 - v1.5.140.6201
  - add: more video file import
  - add: RTSAVideoImport tool
17.01.2020 - v1.5.140.6197
  - add: option to remove trigger sector in ISO Log chopper mode
  - add: SUITE-508 add custom grid to map view
  - fix: check for segment size zero in isolog to prevent crash due to div by zero
  - fix: SUITE-1024 "Force to Tab" option for views
  - fix: SUITE-481 writing and reading from meta data enum fields
  - fix: temporal direction filter in signal locator when rotating cross +/-180 degree
16.01.2020 - v1.5.140.6191
  - add: support for chopper based directional finding
15.01.2020 - v1.5.140.6189
  - add: IQ to directional spectrum conversion block for ISO log chopper auto detect
  - add: noise detection in antenna segment detector block
  - add: Permanent Tab in the Ribbon Bar
08.01.2020 - v1.5.140.6178
  - fix: add reset buffer to quasi max (peak) trace
  - fix: energy accumulation in sweep conversion
07.01.2020 - v1.5.140.6175
  - add: add QP measurement for traces
  - add: limit to marker display in marker table
04.01.2020 - v1.5.140.6171
  - add: Added FlowSheet to process the FrequenzPlan PDF
  - add: SUITE-1024 show limit lines in spectrum view
  - fix: linux build
29.12.2019 - v1.5.140.6159
  - add: more blocks changed to implement the box/inside axis labeling
28.12.2019 - v1.5.140.6156
  - fix: cursor axis lable position with inside axis labeling
26.12.2019 - v1.5.140.6152
  - add: color setting for multi zoom spectrum
  - add: optional right and top chart axis
24.12.2019 - v1.5.140.6149
  - add: title to multi spectrum zoom blocks
  - fix: crash in drone signal locator with looong trails
23.12.2019 - v1.5.140.6146
  - add: option to overlay frequency profile on spectrum in multi spectrum zoom
21.12.2019 - v1.5.140.6143
  - add: frequency profile to multi spectrum zoom
  - fix: Qt5.14 high DPI scaling
  - fix: SUITE-1018  Actualisation of status line message does not work propperly
20.12.2019 - v1.5.140.6139
  - fix: SUITE-1031 Deleting or adding user defaults crashes RTSA
20.12.2019 - v1.5.140.6137
  - fix: SUITE-1006 RTSA does not start on double click on a mission file (windows system)
20.12.2019 - v1.5.140.6135
  - fix: Corrected check for new vc_Redist.exe
20.12.2019 - v1.5.140.6133
  - fix: crash in V5 shutdown code due to racing condition
  - fix: display problems in condition block with long duration packets
18.12.2019 - v1.5.140.6123
  - fix: msvc2019 build
16.12.2019 - v1.5.132.6109
  - add: flexible rows and columns to multi spectrum block
  - add: optional placement of axis labels on chart side of axis
  - add: optional waterfall view in spectrum block
  - fix: 5.14 build issues
  - fix: log message for invalid object/parent/thread mix in AxisPTZCam
  - fix: spelling error in drones.xml
  - fix: SUITE-1022 Detached windows saved as full screen comes up as small windows
14.12.2019 - v1.5.132.6099
  - add: numeric labels to spectrum zoom areas
  - fix: changed NaN encoding in JSON to use null instead
14.12.2019 - v1.5.132.6096
  - fix: SUITE-983 areas not visible in topo mode when editing
13.12.2019 - v1.5.132.6094
  - add: complete V6B checkin
  - add: firmware for V6B
  - add: SUITE-1010 added check box to lock/unlock the primary and secondary map view in DDCC
  - add: V6B
  - fix: color import of 3D models failed with too many spaces
  - fix: V6 callback was broken due to V6B changes
12.12.2019 - v1.5.132.6087
  - add: SUITE-1011 autodetect areas of interest in multi zoom spectrum block
09.12.2019 - v1.5.132.6079
  - fix: revert absolute antenna transform on file import
08.12.2019 - v1.5.132.6076
  - add: pan and zoom using ALT+MOUSE in IQ demodulator block
06.12.2019 - v1.5.132.6073
  - add: SUITE-1011 add multi zoom spectrum view block
  - fix: Position and size of detached docking windows on a mixed high-DPI setup
  - fix: SUITE-1004 Health Monitor and BlockGraphEditor have no content in detached windows at start up
  - fix: SUITE-1012 video channel masking was broken due to changes for channel hopping
  - fix: SUITE-1013 drong labels placed at wrong position in split map mode
  - fix: SUITE-411 Mission handling
06.12.2019 - v1.5.132.6064
  - fix: potential crash due to empty detection packet in DD signal locator
05.12.2019 - v1.5.132.6058
  - fix: crash when moving alert zone saved by previous version of RTSA
03.12.2019 - v1.5.132.6047
  - add: optional per vertex elevation and height for areas in drone detection
  - fix: missing checkin
  - fix: ScaledSubUnit type bug
  - fix: UnitConversion bug
03.12.2019 - v1.5.132.6041
  - add: RTSA can now register the rmix file type in the operating system ( Windows ) so that a double click on a mission file opens the app
  - fix: SUITE-1009 No second warning that mission cannot be saved
  - fix: SUITE-965 Suite style change works not properly
29.11.2019 - v1.5.132.6035
  - add: ROCClient: added WatchDog Function for RTSA
  - fix: SUITE-1006 RTSA does not start on double click on a mission file (windows system)
28.11.2019 - v1.5.132.6028
  - add: antenna base azimuth and declination to drone data
25.11.2019 - v1.5.132.6024
  - fix: improve gui/watchdog responsiveness during V5 recovery
21.11.2019 - v1.5.132.6006
  - fix: crash if topo data cannot be loaded from server (http errror code)
  - fix: crash in rtsa due to incomplete layers transfer in http connection of drone data
  - fix: SUITE-1006    RTSA does not start on double click on a mission file (windows system)
  - fix: SUITE-1008 Crash report sending fails - missing dialog to remove report data.
  - fix: SUITE-987 show floor elevation config in 3D model view
21.11.2019 - v1.5.132.6000
  - add: SUITE-994 add REST API to log messages in info center
20.11.2019 - v1.5.132.5993
  - add: keyboard movement of spectrum condition ranges
  - add: show disabled condition ranges ghosted
  - add: SUITE-947 remember frequency range in blocks
  - add: SUITE-947 show condition ranges outside of active range
  - add: SUITE-947 update frequency range in blocks when connected or source range changes
19.11.2019 - v1.5.132.5991
  - add: New helper tool: ROCCmd
16.11.2019 - v1.5.132.5980
  - fix: SUITE-990 remove duplicate antenna name
13.11.2019 - v1.5.132.5973
  - fix: RTSA installer was still using an old Qt dll
12.11.2019 - v1.5.131.5960
  - add: ROC - Licenses
12.11.2019 - v1.5.131.5958
  - add: second frequency for FLARM decoder
  - fix: linux build
08.11.2019 - v1.5.131.5951
  - fix: SUITE-1000 use elevation to display antenna 3D model
06.11.2019 - v1.5.131.5948
  - add: New REST Endpoint Infocenter Delete
  - add: version 1.1 of echodyne radar
06.11.2019 - v1.5.131.5943
  - fix: Compiler error
06.11.2019 - v1.5.131.5941
  - add: HealthMonitor can now display the status of a remote block in the tooltip
  - add: InfoCenter can now report its status to the HealthCenter
  - add: RestServer can now report its status to the HealthCenter
  - fix: A mission load request from a remote RTSA could crash the client
05.11.2019 - v1.5.131.5935
  - add: SUITE-978 add spectrum mask from signal in trigger block
  - add: SUITE-991 tooltips for quick icons
  - add: transfer of conditions from stream to stream using binary operator blocks
01.11.2019 - v1.5.131.5923
  - fix: clipping of areas that are completely below the ground level in topo mode
  - fix: SUITE-986 area elevation not configurable with slider
31.10.2019 - v1.5.131.5920
  - add: SUITE-984 add checkbox for sector highlights in antenna grid
  - fix: SUITE-981 sea level not correctly displayed in user markers
30.10.2019 - v1.5.131.5917
  - fix: crash in DDCC due to empty user marker icon menu
26.10.2019 - v1.5.131.5908
  - add: remote control configuration for script blocks
  - add: remote control of elevation offset in FLARM block
  - add: stream export filter for multi stream logger
  - add: SUITE-976 export and import of areas and traces to condition block
  - fix: SUITE-975 Elevation range to -200 to +8000m
25.10.2019 - v1.5.131.5901
  - add: autostart and autotrim to multi stream logger block
  - add: SUITE-970 add info endpoint to http stream server block
23.10.2019 - v1.5.131.5896
  - fix: Linux build
22.10.2019 - v1.5.131.5894
  - add: SUITE-970 ssl encryption of HTTP connection with custom certificates
  - add: SUITE-970 user/password option in HTTP client
  - fix: open ssl 1.1 dlls missing
22.10.2019 - v1.5.131.5891
  - add: multi stream logger block
  - fix: linux build
  - fix: SUITE-949 fix direction and thread display in icon annotation
19.10.2019 - v1.5.131.5886
  - add: condition flags preview to file reader and writer block
18.10.2019 - v1.5.131.5884
  - add: Notification ToolTips in Configuration Dialog
  - add: SUITE-949 target annotation fine control
  - add: SUITE-958 show hovering items in drag mode
16.10.2019 - v1.5.131.5878
  - fix: drone signal fusion maintains distance when positional info lost
  - fix: SUITE-960 Error in Info Center issue
16.10.2019 - v1.5.131.5875
  - add: Health Monitor
15.10.2019 - v1.5.131.5871
  - add: range setting to user markers
  - fix: SUITE-948 add/remove control points in color mapping using menu
14.10.2019 - v1.5.131.5867
  - fix: memory leak in continuous healtcheck by watchdog
14.10.2019 - v1.5.131.5864
  - add: start button to ribbon for radar and observer blocks
13.10.2019 - v1.5.131.5862
  - fix:
  - fix: SUITE-927 Config Item Trees not connected to Mission root config
12.10.2019 - v1.5.131.5858
  - add: SUITE-941 elevation for user markers
11.10.2019 - v1.5.131.5855
  - add: SUITE-936 independent control over drone attack path
  - add: SUITE-937 select participating detection sources in signal fusion
  - fix: SUITE-931 non linearity in zomm factor from angle calculation
  - fix: SUITE-938 Mission Security: password is displayed in plain text after protection has been activated.
10.10.2019 - v1.5.131.5847
  - add: SUITE-933 add target selection in video monitor by clicking on the object icon
09.10.2019 - v1.5.131.5845
  - fix: ISO log sector 63 was not usable
  - fix: SUITE-930 target observer elevation not used
08.10.2019 - v1.5.131.5843
  - add: SUITE-844 mark location in DD command center map and focus camera on hotkey
05.10.2019 - v1.5.131.5839
  - fix: antenna dome mesh not updated if order changes
  - fix: ISO log loop mode antenna
03.10.2019 - v1.5.131.5835
  - fix: SUITE-926 Camera cones dont show up at records
02.10.2019 - v1.5.131.5833
  - fix: enable all iso log sectors for loop antennas
  - fix: timer wraparound error in AXIS PTZ cam when using RTSP/UDP
02.10.2019 - v1.5.131.5830
  - fix: slow shutdown of axis ptz block if connection failed
  - fix: SUITE-928 tracking grid highlights not aligned
01.10.2019 - v1.5.131.5823
  - add: color histogram to trigger block
  - fix: SUITE-925 deactivated targets show up in detection grid
  - fix: undo / redo problems with condition block
30.09.2019 - v1.5.131.5818
  - fix: patch timing in stored drone detection data, when replaying contiguous
28.09.2019 - v1.5.131.5814
  - fix: crash in condition block with zero size packets
27.09.2019 - v1.5.131.5812
  - add: drone thermal image tracking
  - fix: clear last error in V6 when entering ready state
  - fix: SUITE-922 replay with loop mode does not restart in DDS
27.09.2019 - v1.5.131.5806
  - add: elevation for drone detection zones
  - fix: SUITE-914, SUITE-915 exclude zones now respected for blinking and
  - fix: SUITE-921 crash when closing a detached RTSA view
25.09.2019 - v1.5.131.5801
  - fix: Problem when switching the REST Server off and on
24.09.2019 - v1.5.131.5797
  - add: Better application sounds under Windows
  - add: camera control via http block connection
  - add: Table tooltip support for Block Performance backchannel
  - fix: crash when removing copied jammer section
  - fix: Enabling / disabling the Status and Ribbon has no immediate effect when leaving the Configuration dialog
  - fix: SUITE-918 camera moves when joystick disconnected
22.09.2019 - v1.5.131.5787
  - fix: http client synch queuing problem
21.09.2019 - v1.5.131.5781
  - add: custom cotainer window to workaround QT hidpi scaling error with open gl windows
  - fix: crash in DDS when crating custom map
20.09.2019 - v1.5.131.5778
  - fix: SUITE-909 Multi monitor usage error
  - fix: SUITE-911 Crashdump is shown with Non-Interactive Gui option
20.09.2019 - v1.4.1.5776
  - add: SUITE-908 added sensor fusion control to side bar icon menu
  - fix: remove log line
  - fix: system time offset was only sec not msec precisionin http connection
19.09.2019 - v1.4.1.5769
  - fix: crash in restart of axis ptz cam
  - fix: flickering of drone info boxes if map is busy with drones
18.09.2019 - v1.4.1.5763
  - add: statistics display for RTP transport in Axis PTZ
15.09.2019 - v1.4.1.5755
  - fix: Fixed problem with ROCInstall Install Endpoint
14.09.2019 - v1.4.1.5753
  - fix: drone log update for track fusion
13.09.2019 - v1.4.1.5748
  - fix: linux build
  - fix: linux build
13.09.2019 - v1.4.1.5743
  - add: drone target fusion
  - fix: SUITE-900 copy current issue url  Config column labels of RTSA DDCommandCenter get truncated
11.09.2019 - v1.4.1.5739
  - add: RTSP streaming support for Axis Camera
  - add: SUITE-901 added missing generic drone images
  - add: synch input to observer block
  - fix: linux build
  - fix: video drone detection camera altitude not propagated error
06.09.2019 - v1.4.1.5729
  - fix: improve numeric stability of stream clock
03.09.2019 - v1.4.1.5715
  - fix: linux build
02.09.2019 - v1.4.1.5711
  - add: SUITE-737 Joystick for PTZ control
  - add: SUITE-890 targets in video monitor block
  - fix: smooth playback of multisource drone tracking data
02.09.2019 - v1.4.1.5709
  - add: Option to restart the RTSA after installling new licenses
30.08.2019 - v1.4.1.5680
  - fix: crash due to compass display in map
30.08.2019 - v1.4.1.5678
  - add: JIRA-825 add compass to map view
  - add: SUITE-657 New RC and Drone Patterns
  - add: SUITE-847 show date and time as overlay in DD command center block
27.08.2019 - v1.4.1.5670
  - fix: devazimuth
24.08.2019 - v1.4.1.5662
  - add: SUITE-487 remote control of sector and segment of ISO log using HTTP remote block or DDCC block
  - fix: SUITE-882 DPI Scaling was not working in DDCC
23.08.2019 - v1.4.1.5655
  - fix: more flicker in drone signal locator
22.08.2019 - v1.4.1.5650
  - add: SUITE-866 added system config mode setting to DDS to prevent accidential change of base configuration
  - fix: SUITE-875 azimuth was math instead of geo oriented in DDS JSON
22.08.2019 - v1.4.1.5647
  - fix: flickering drone signal locator and vertical position
21.08.2019 - v1.4.1.5640
  - add: SUITE-864 add user sensor block (DDS Observer)
20.08.2019 - v1.4.1.5637
  - add: Missing app icons for Mac build
18.08.2019 - v1.4.1.5629
  - add: SUITE-874 ETag support for HTTP block
  - fix: drone video stream detection with V6 and rotating ISO log
17.08.2019 - v1.4.1.5626
  - fix: SUITE-773 more immediate feedback if file cannot be written by file writer block
  - fix: SUITE-875 RTBW Span of V5 conflicted with selected profile
16.08.2019 - v1.4.1.5619
  - add: SUITE-872 add dronesdb REST endpoint
  - add: update period for UFO generator
  - fix: startup timing of V5 when sweeping or switching between frequencies
  - fix: SUITE-873 V5 RTBW Span not saved
  - fix: SUITE-896 size of label area in grid waterfall with single row
15.08.2019 - v1.4.1.5613
  - fix: crash when sample size changes in direction power block
05.08.2019 - v1.4.1.5600
  - add: ROC - Remote GetInfoCenter
02.08.2019 - v1.4.1.5594
  - add: individual zoom factor for thermal image on axis ptz
  - fix: aperture to zoom calculation in PTZ cam thermal mode
30.07.2019 - v1.4.1.5586
  - add: wiper support for axis ptz
  - fix: Present localized dates in PackageManage and Package Editor dialogs
  - fix: Smile and Frown functions didn't work
29.07.2019 - v1.4.1.5577
  - add: brightness, saturation, contrast etc. to Axis PTZ Cam block
27.07.2019 - v1.4.1.5574
  - add: more checks for filename in file writer
  - add: SUITE-773 putting file writer block into critical state if file cannot be written or filename is empty
26.07.2019 - v1.4.1.5570
  - add: show drone icons and names in video views for drones detected by radar or iso log
  - fix: SUITE-861 fix crash with GPS module on Windows 7
25.07.2019 - v1.4.1.5567
  - add: SUITE-851 switch to manual mode, when camera controlled by user
23.07.2019 - v1.4.1.5562
  - add: clustering and classifier to pulse detector block
20.07.2019 - v1.4.1.5555
  - add: start/stop to robin radar block
19.07.2019 - v1.4.1.5551
  - add: tile argument for geomap json endpoint
  - fix: json parser error message in watchdog
19.07.2019 - v1.4.1.5545
  - add: booster stage to oulier detector in pulse detector block
  - fix: linux build
18.07.2019 - v1.4.1.5539
  - add: geomaps endpoint to http server and source argument to geomap endpoint
17.07.2019 - v1.4.1.5536
  - add: improve pulse detector
  - add: robin radar package
16.07.2019 - v1.4.1.5532
  - add: Sky mantis video detector
  - fix: crash in jpeg decoder with image sizes not divisble by 8
13.07.2019 - v1.4.1.5524
  - add: outlier detector to pulse detector block
  - fix: uninitialized zero repeat coefficient in drone video channel detection
12.07.2019 - v1.4.1.5521
  - fix: SUITE-850 drone icon color changed with type
  - fix: SUITE-855 crash when attaching block to pulse detector
10.07.2019 - v1.4.1.5513
  - add: pulse detector block
08.07.2019 - v1.4.1.5506
  - add: FPGA Bitfile Version 2.0.001
  - add: show FPGA version and revision for V6
06.07.2019 - v1.4.1.5502
  - add: gzip compression for HTTP server
  - fix: only use http compression if requested
06.07.2019 - v1.4.1.5499
  - add: Version String to FPGA Bitfile
05.07.2019 - v1.4.1.5496
  - add: geomap endpoint for http connection
05.07.2019 - v1.4.1.5492
  - add: FPGA version number read for V6
  - add: shifted FFT modes for V6
05.07.2019 - v1.4.1.5490
  - fix: layout in default mission
03.07.2019 - v1.4.1.5485
  - fix: flysky GT3E remote
  - fix: SUITE-843 crash in DDS for FFT sizes > 8k
02.07.2019 - v1.4.1.5481
  - fix: linux build
  - fix: linux build
01.07.2019 - v1.4.1.5476
  - add: direction icons and beams to topographic views in DDCC
  - add: support for geo tif
  - add: watermark control, blocke by Feature_Watermark key
  - fix: crash in DDCC with incomplete text to speech installation
  - fix: Mac Build
01.07.2019 - v1.4.1.5471
  - add: health status for V6
  - add: more quick menus
  - add: quick menu to combo view
  - add: V6 run button now includes connect
30.06.2019 - v1.4.1.5466
  - fix: SUITE-820 absolute time in histogram volumetric
29.06.2019 - v1.4.1.5464
  - add: SUITE-824 hotkeys for camera control in DDCC
  - add: time shift block now supports drone tracking data
  - fix: CheckBox text visible after click
  - fix: Crash reported on 2019-06-28 14-21-08
  - fix: Possible fix for: SUITE-772 Closing a changed mission sometimes the user get not asked to save the mission
  - fix: SUITE-834 Second started RTSA mission should be an empty mission
28.06.2019 - v1.4.1.5459
  - fix: linux build
27.06.2019 - v1.4.1.5457
  - add: Added an option for ConfigItemBool to force the display of the text ( test is hidden by default )
  - fix: SUITE-834 Second started RTSA mission should be an empty mission
27.06.2019 - v1.4.1.5451
  - add: speed to dds jsiqa blocks
  - fix: power level and timing of FPGA FFT streaming and V6
  - fix: SUITE-839 wrong level in category timeline block
26.06.2019 - v1.4.1.5444
  - add: declination setting to jsiqa drone detectors
  - fix: initial show of tracked targets when type changes
26.06.2019 - v1.4.1.5442
  - fix: update of drone icon when type changes
25.06.2019 - v1.4.1.5439
  - fix: crash in drone detection history table
  - fix: memory leak when overflowing inbound block
25.06.2019 - v1.4.1.5437
  - add: parrot drone to drone video detection
  - add: support for drone type on the fly change
  - fix: elev angle in flir radar
25.06.2019 - v1.4.1.5435
  - fix: crash due to racingcondition in V5 and ISO Log
24.06.2019 - v1.4.1.5432
  - add: compression control to Axis PTZ
  - add: focus and hover for drones in map and history table
  - add: parrot drone images to drone live video detector
  - fix: crash in video monitor block
24.06.2019 - v1.4.1.5426
  - add: remote control filter for drone video channel detector
  - fix: new mission modified message on close
  - fix: SUITE-837 Improve Slider and Text Input
23.06.2019 - v1.4.1.5415
  - add: grid and minimap to video monitor view
22.06.2019 - v1.4.1.5413
  - add: manual focus for Aixs PTZ
  - add: position preview for video monitor pan and tilt
  - add: support for LIVE vs. ANY dropping of samples in outbound blocks
  - add: zoom of sub axis layout in stream statistics
  - add: zoom preview to AxisPTZ with video monitor
  - fix: display of center frequency in spectrum blocks
  - fix: horizontal layout of spectra frequency
  - fix: jsica compiler error
  - fix: linux build
  - fix: SUITE-836 changing FFT size will not update resolution
20.06.2019 - v1.4.1.5403
  - fix: float12.4 conversion
20.06.2019 - v1.4.1.5401
  - add: Inspiron 2 remote detection
19.06.2019 - v1.4.1.5398
  - add: declination angle for drone video detector
  - fix: linux build
19.06.2019 - v1.4.1.5395
  - add: height offset to flarm block
  - fix: remove memory leak from video detection pipe
19.06.2019 - v1.4.1.5393
  - add: drone video tracking package
  - add: new version of flarm decoder plugin
  - fix: crash due to racing condition in V5 FTDI driver
  - fix: crash when shutting down isolog while rotating
18.06.2019 - v1.4.1.5390
  - fix: add max processing time to jammer detector
  - fix: crash when rebooting or reconnecting v5
  - fix: potential racing condition in timing queue of circular byte buffer
18.06.2019 - v1.4.1.5387
  - add: angle based camera drone tracking
  - add: more radar targets
16.06.2019 - v1.4.1.5384
  - add: key shortcuts to switch focus drone in DDS
  - add: new drone pattern files
  - fix: SUITE-832 dynamically adjust to FFT power range or V6 non GA modes reference level changes
14.06.2019 - v1.4.1.5378
  - add: type detection to FLIR Radar
14.06.2019 - v1.4.1.5375
  - add: SNR and IP address info to Axis PTZ health status
  - fix: Axis PTZ check generic key was disabled in previous checkin
  - fix: frequency profiles channel not showing up
14.06.2019 - v1.4.1.5370
  - add: low pass filter for direction in ISO Log Direction Finder
  - fix: domination was not initialized for script generated drone events
  - fix: ISO Log AutoRotate/Switching with on the fly change of sector mask or element
  - fix: SUITE-829 antenna range only works in topographic mode
12.06.2019 - v1.4.1.5361
  - add: domination features for drone detections
  - add: SUITE-807 add parrot disco detection as a wifi digital video drone
  - add: WiFi SSID Detector and UFO Generator plugins
  - fix: SUITE-828 ISO Log Amplifier switching for ancient protocol
12.06.2019 - v1.4.1.5355
  - add: SUITE-824 coverage area for script block based sensors
  - add: SUITE-826 key for ISO Log directional finding block
  - fix: Memory Leaks
11.06.2019 - v1.4.1.5345
  - add: SUITE-628 added coverage area for camera
09.06.2019 - v1.4.1.5342
  - fix: crash in trigger block
  - fix: segment length in trigger block
  - fix: SUITE-814 AM/FM Demodulator Bugs
  - fix: SUITE-822 Spectrum Condition Area Name not saved
07.06.2019 - v1.4.1.5329
  - add: New Frequency Profile Selection dialog
  - fix: cursor based range markers in waterfall
05.06.2019 - v1.4.1.5318
  - add: multi selection in frequency profile dialog
  - fix: SUITE-810 V5 frequency offset shifted
05.06.2019 - v1.4.1.5313
  - add: frame rate setting to configuration
  - fix: crorrect marker sort order in waterfall
  - fix: hide ShowXLine inw aterfall in non peaks mode
04.06.2019 - v1.4.1.5308
  - add: head, put and delete to http.js
  - add: patch to http.js
04.06.2019 - v1.4.1.5302
  - add: SUITE-637 add ADSB Decoder Package
  - fix: SUITE-806 wrapped spectrum does not show Clear/Write with time compression
01.06.2019 - v1.4.1.5292
  - fix: antenna propagation in V6 and IQ slice block
  - fix: linux build
  - fix: slider maximum right position was not encoded correclty
  - fix: SUITE-801 to 804
31.05.2019 - v1.4.1.5288
  - #fix: SUITE-783 Channel hopping drone should not be recorded as new target
30.05.2019 - v1.4.1.5285
  - fix: SUITE-800 Wrapped Spectrum shows no trace updates
29.05.2019 - v1.4.1.5283
  - fix: initial wrong rf configurationpath in V5
  - fix: SUITE-805 hide outer surfaces in geo map cross cut
29.05.2019 - v1.4.1.5273
  - fix: crash due to a bad combination of V5 channel hopping, stream signaling and chunk handling in http connection, when reconnecting to a closed connection
28.05.2019 - v1.4.1.5269
  - add: more logging for dsp file stream
28.05.2019 - v1.4.1.5265
  - add: SUITE-787 cut plane for 3D topographic map
  - add: SUITE-799 Input and Output configuration of Block Factories
  - fix: dual Lane IQ Mode with FFT support
25.05.2019 - v1.4.1.5256
  - add: dsp load stats to axis ptz block
  - add: health status to http client block
  - fix: antenna memory leak in DDCC
  - fix: buffer size in PTZ JPEG
  - fix: remove potential racing condition in inbound stream block
24.05.2019 - v1.4.1.5251
  - add: float format for V6 FPGA fft data
  - fix: time compression in V6
23.05.2019 - v1.4.1.5248
  - add: FPGA FFT Support for V6
21.05.2019 - v1.4.1.5244
  - add: FLIR and Echodyne radar packages
  - fix: crash during frequent V5 attenuation changes
21.05.2019 - v1.4.1.5242
  - add: FLARM decoder block to perforce
  - add: Software AGC for V5
  - fix: remove ADSB prefix from drone detection view
21.05.2019 - v1.4.1.5240
  - add: IQ Condition and Select blocks for JSIQA WiFi Decoder
  - add: TCP connection based radar base class in JSIQA
20.05.2019 - v1.4.1.5237
  - fix: crash in DDS when using more than one remapping for one drone
20.05.2019 - v1.4.1.5235
  - add: reguilar expression matching to drone remapping
  - fix: crash in image scaling code for zero sized images
  - fix: Fix problem in
  - fix: map elevation range was 8000km instead of 8km
  - fix: paths to installed packages was locked to "Documents"
20.05.2019 - v1.4.1.5231
  - add: antenna propagation for radar blocks
  - add: IQ power condition block
  - fix: bind() method in JSIQA
18.05.2019 - v1.4.1.5228
  - add: Mission support for derived blocks. Extended the Create Derived Factory dialog
  - add: SUITE-695 antenna range grid
  - fix: SUITE-794 removed sorting option from histogram markers
  - fix: SUITE-795 center config in markers
  - fix: SUITE-796 accumulation mode sum in histogram markers
  - fix: SUITE-797 added meaning to x and y values in histogram markers
  - fix: SUITE-798 removed x and y lines in histogram markers
17.05.2019 - v1.4.1.5222
  - add: UFO for drone detection
16.05.2019 - v1.4.1.5220
  - fix: failed to read more than one drone mapping
16.05.2019 - v1.4.1.5218
  - add: SUITE-771 renaming of drones bases on type and callsign
16.05.2019 - v1.4.1.5216
  - add: Block Editor - Backchannel for BlockGraph (Icon) Buttons
  - add: connect health action buttons to ISO log and Spectran V6 start buttons
  - add: SUITE-784 InfoCenter needs more Information
  - add: SUITE-790 No automatic scrolling inside the *BlockGraph Editor*
  - fix: JSIQA gather
  - fix: SUITE-789 ISO log directional finding time compression crosses segment boundaries
  - fix: SUITE-793 remote setting of ISO log azimuth and declination
15.05.2019 - v1.4.1.5205
  - add: if and gather methods to IQ object in JSIQA
14.05.2019 - v1.4.1.5203
  - add: more IQ SIMD operations for JSIQA
  - fix: crash when mapping non existing config item in JSIQA
  - fix: Problem with help package
13.05.2019 - v1.4.1.5198
  - add: geo library for JSIQA
  - add: text marker in JSIQA editor
  - fix: crash on heap memory exhausted in JSIQA
13.05.2019 - v1.4.1.5195
  - add: more JSIQA BitArray methods
  - add: performance profiler to JSIQA
12.05.2019 - v1.4.1.5192
  - add: BitArray to JSIQA
11.05.2019 - v1.4.1.5188
  - add: alternate channel select for dual receiver mode in V6
  - add: new drone pattesn for DJI Mavic AIR
  - fix: crash when exporting file segments more than once from a file reader
  - fix: missing check out
  - fix: problems with adding new classes in video pattern detector
  - fix: SUITE-782 dot in files exported from file reader block
10.05.2019 - v1.4.1.5180
  - add: block health state icons
  - add: BlockGraphEditor - Copy Paste Cut
  - fix: crash on shutdown of HTTP server block due to race condition
  - fix: crash when using text entries with completion
  - fix: incomplete chunk processing in HTTP streaming connection (may have caused crashes and invalid data)
  - fix: Removed strange include which causes the linux compiler to fail
09.05.2019 - v1.4.1.5169
  - fix: improve error resilliance of radial controller code
  - fix: SUITE-781 missing dll after RTSA installation (WIN7)
09.05.2019 - v1.4.1.5166
  - add: compression setting to time shift block
07.05.2019 - v1.4.1.5162
  - fix: SUITE-780 file reader retains compression on file export to rtsa file
06.05.2019 - v1.4.1.5160
  - add: FFT and modulation to JSIQA IQ for WiFi decoding
  - add: Geodata charts for JSIQA for ISO log placement by drone flight
  - add: New menu item in 'File' - Opens a new RTSA application with an empty mission
  - fix: crash in adsb decoder when restarting playback
  - fix: memory leaks and crashes in JSIQA
  - fix: orientation of preview waterfall in IQ recording
  - fix: rad vs. dergree problems in ISO log and Jammer when rotating antennas from a remote side
04.05.2019 - v1.4.1.5154
  - add: New layout functions: Make same width, Make same height
  - add: New TabWidget. Items can now be moved.
03.05.2019 - v1.4.1.5147
  - fix: Memory leak
02.05.2019 - v1.4.1.5145
  - add: more methods for JSIQA IQ Object
  - fix: memory leak in JSIQA stream packet processing
01.05.2019 - v1.4.1.5143
  - add: phase/radius info to cursor in IQ vector scope
  - fix: crash in drone detection block when no antenna in first slot
  - fix: flaky cursor position in extreem zoom scenario
30.04.2019 - v1.4.1.5140
  - fix: switch to older time adjustment API in GPS block to improve compatibility
30.04.2019 - v1.4.1.5138
  - fix: memory allocation problem in IQ Histogram block
29.04.2019 - v1.4.1.5136
  - fix: USB bus reconnect in V6 for command and debug channels
28.04.2019 - v1.4.1.5134
  - add: binary IQ operator block
  - add: phase shift to IQ FIR Filter Block
  - add: USB buffer usage stats in V6
  - fix: crash in previous checkin
  - fix: minidump level full
27.04.2019 - v1.4.1.5130
  - fix: Eliminated performance penalty when hovering over the GUI
26.04.2019 - v1.4.1.5128
  - add: GHz/s sweep rate in legend
25.04.2019 - v1.4.1.5126
  - fix: Crash after opening a Mission
24.04.2019 - v1.4.1.5124
  - fix: Package Manager memory leak
24.04.2019 - v1.4.1.5119
  - add: option to set system time from GPS when using AAronia GPS Logger
  - fix: linux build
  - fix: right boundary adaption in x range cursor (zoom frequency view)
  - fix: time display in histogram volumetric
23.04.2019 - v1.4.1.5110
  - add: span cursor to IQ Demodulator block
23.04.2019 - v1.4.1.5108
  - fix: crash on V6 sweep with delayed status check
23.04.2019 - v1.4.1.5106
  - add: delayed check for sweep config item for V6
  - add: experimental quick menu icons to waterfall and spectrum
  - add: new source file for microblaze CPU
  - fix: New FPGA Microblaze code
22.04.2019 - v1.4.1.5101
  - add: Frequency zoom view for spectrum view
  - add: V6 bytes per second and USB channel stats
19.04.2019 - v1.4.1.5096
  - add: rate info in legend
  - fix: missing unit in rage legend
  - fix: semicolon in AppShortcuts.cpp
  - fix: SUITE-770 Crash with new tab headers
19.04.2019 - v1.4.1.5090
  - fix: AD9528 startup problems reduced by multiple retries
18.04.2019 - v1.4.1.5083
  - fix: SUITE-768 crash with invalid graph connection
17.04.2019 - v1.4.1.5080
  - add: selector for switching segment in antenna segment filter
  - fix: V6 antenna segment propagation
16.04.2019 - v1.4.1.5078
  - add: keyboard and mouse frequency panning using ALT as qualifier
  - add: sample delta processing to IQ vectorscope
  - fix: initial placement of operators in graph
  - fix: SUITE-765 Blockgraph Layout for huge column of unconnected blocks
  - fix: test build
14.04.2019 - v1.4.1.5071
  - add: parallel firmware download for V6 USB controller
  - fix: V6 USB command dma buffer problems
13.04.2019 - v1.4.1.5067
  - add: 5ms safe interval to iso log switching before enabling new segment
  - add: elevation support for drone detection
  - add: second IQ output channel for V6
  - fix: SUITE-764 trail duration limited by array size
  - fix: SUITE-766 doubled number of antenna segment regions in waterfall view
12.04.2019 - v1.4.1.5062
  - fix: antenna height problem in drone detection, preventing correct power calculation
  - fix: antenna rotation on map
  - fix: reactivate raw streaming in V6 after changes to streamer thread
10.04.2019 - v1.4.1.5058
  - fix: crash in shutdown of V6
  - fix: crash in spectrum sweep when changing fft size on the fly
  - fix: RF correction data now applied on a per bin base in fft
09.04.2019 - v1.4.1.5055
  - add: flarm decoder key
  - add: SUITE-689 Unfold all menu controlls (toggle function)
  - fix: data rate display in graph editor
  - fix: linux build
  - fix: warning message when sending JSIQA data into dds command center
08.04.2019 - v1.4.1.5050
  - add: DSP packet drop statistics to V6
  - fix: stream end problem in DC offset correction
06.04.2019 - v1.4.1.5047
  - add: video object tracking groundwork to JSIQA and DDS
05.04.2019 - v1.4.1.5045
  - add: ComboBox in ConfigItemTree can now enable / disable specific items
  - add: QuickColorWidget for ConfigTreeItems
  - fix: 'Reset to Factory Defaults' in group 'Settings' wasn't working
  - fix: linux build
04.04.2019 - v1.4.1.5040
  - add: variable ISO log switching phase discarded by antenna segment detector in chopper mode
  - fix: missing checkin
03.04.2019 - v1.4.1.5037
  - fix: antenna layout propagation through HF block
  - fix: SUITE-762 numbering of areas is not correct
03.04.2019 - v1.4.1.5034
  - add: additional ISO Log chopper modes
  - add: Antenna Segment Detector Block
  - add: IQ VectorScope to chart blocks
  - fix: drone detection overload due to high spectra rate of V6
  - fix: scaling of drone annotation texts in 3D
02.04.2019 - v1.4.1.5027
  - add: Blinking line edit when entering an invalid value in the ConfigItemTree dialog. The dialog won't come up anymore.
  - fix: Mac Build error
30.03.2019 - v1.4.1.5020
  - fix: linux build
29.03.2019 - v1.4.1.5007
  - add: A mission can now be saved in compressed mode ( gz )
  - add: choppermode for ARCP device ISO log
  - add: status information to V6 chart
  - fix: start noise in V6 sweeping by delaying one packet
  - fix: too high rate of debug log in USB V6 firmware
  - fix: V6 SW DC offset for sweeping
28.03.2019 - v1.4.1.4994
  - fix: Possible crash when opening the configuration dialog
28.03.2019 - v1.4.1.4992
  - add: SUITE-759 Full Screen option for the Aaronia RTSA Suite PRO
  - add: video blocks to JSIQA
27.03.2019 - v1.4.1.4988
  - fix: large zoom buttons on maps
  - fix: remove log message from SSID plugin dll
26.03.2019 - v1.4.1.4986
  - fix: reduce number of errors reported for short V5 spectrum packets
26.03.2019 - v1.4.1.4982
  - fix: antenna rotation display if azimuth non zero
26.03.2019 - v1.4.1.4980
  - add: alternate location algorithm to drone signal locator
25.03.2019 - v1.4.1.4976
  - fix: status of manual position in GPS block
25.03.2019 - v1.4.1.4972
  - fix: gps state with manual mode, when changing update mode
25.03.2019 - v1.4.1.4970
  - add: FFT super sampling
22.03.2019 - v1.4.1.4965
  - add: expand IQ to spectrum FFT to 32K
  - fix: crash in AM/FM decoder
22.03.2019 - v1.4.1.4961
  - fix: RadioLINK AT10 false detection
21.03.2019 - v1.4.1.4959
  - add: Deverived Factories protection
  - add: merge and split stream blocks
  - add: missing files from previous checkin
  - add: SUITE-729 license key protection for script files
  - add: SUITE-755 add health status to SSID block
20.03.2019 - v1.4.1.4954
  - add: RX2 to V6
  - fix: Crash when exiting AppPackageEditor dialog
19.03.2019 - v1.4.1.4950
  - add: SUITE-754 add keys for 3D map models and Axis PTZ
  - fix: SUITE-758 warning status of GPS with manual configuration
18.03.2019 - v1.4.1.4945
  - add: Spectran V6 12 Bit IQ format
16.03.2019 - v1.4.1.4937
  - add: secondary map block to DDCC
  - add: SUITE-750 OGN Receiver preparation and fixes
  - add: SUITE-753 Multi lines waterfall
  - fix: Fixed an memory leak in IsoLog block
14.03.2019 - v1.4.1.4930
  - fix: new firmware for V6
  - fix: script block problems due to denormal number suppression
14.03.2019 - v1.4.1.4925
  - add: remote control for SP4T block
  - add: SUITE-186 config option for SP4T RF Switch to work as 4:1 or 1:4
  - add: SUITE-525 rule based switching in SP4T block
  - add: SUITE-752 add column slider to grid waterfall
  - add: support for multiple HF calibration blocks
  - fix: any output type
  - fix: hang in script block when last line is comment
  - fix: linux build
13.03.2019 - v1.4.1.4916
  - fix: completion of half band filter cascade
  - fix: start/stop messages in V6, sweep could not restart after disconnect
  - fix: streaming clock in V6 now stream relative to improve precision
  - fix: thread scheduler when all DSP threads busy
12.03.2019 - v1.4.1.4914
  - fix: blurry block title in toolbax at 125% display
11.03.2019 - v1.4.1.4911
  - fix: crash when drone specification referenced by detector is missing in drones config
11.03.2019 - v1.4.1.4907
  - add: placement of secondary map display in DDCC
09.03.2019 - v1.4.1.4904
  - add: in field update of Spectran V6 FPGA
09.03.2019 - v1.4.1.4902
  - fix: SUITE-748 Info tab zoom buttons in DDCC not alligned
07.03.2019 - v1.4.1.4890
  - fix: crash with pulsed waterfall when switching bin size
  - fix: linux build
  - fix: linux build
  - fix: linux build
06.03.2019 - v1.4.1.4886
  - fix: RTSA Help couldn't be opened if there's an available identical version from the RTSA Service
06.03.2019 - v1.4.1.4884
  - add: 12 bit float format and simulator for V6
  - add: more gui to video classification training operator
05.03.2019 - v1.4.1.4879
  - add: fft video filter
  - add: image preview and thread for video object classifier trainer block
04.03.2019 - v1.4.1.4877
  - add: SUITE-747 additional drone patterns
01.03.2019 - v1.4.1.4873
  - fix: ditone drone detection for beacons
  - fix: missing checkin
01.03.2019 - v1.4.1.4870
  - add: Updated Vietnamese translation
  - fix: Potential crash when changing the gui language.
28.02.2019 - v1.4.1.4865
  - fix: watchdog restart of V5
28.02.2019 - v1.4.1.4862
  - add: empty shell for operator for video classifier training
  - add: icons for image processing operators
  - fix: crash when rendering too complex jammer setup
  - fix: SUITE-742 auto restart of V5 not working
  - fix: SUITE-744 camera range is white
  - fix: SUITE-745 wrong camera icon when 3D planar
27.02.2019 - v1.4.1.4857
  - fix: crash in DDCC when attaching more than four cameras
  - fix: rare shutdown crash
  - fix: SUITE-741 no hover feedback in jammer control
25.02.2019 - v1.4.1.4853
  - add: image object tracking block
22.02.2019 - v1.4.1.4848
  - add: video image combine operator
21.02.2019 - v1.4.1.4839
  - add: region labeling operator
20.02.2019 - v1.4.1.4836
  - fix: invalid map geo coordinate position in topo maps
20.02.2019 - v1.4.1.4830
  - add: contrast video operator
  - add: debug gui and raw data output for Spectran V6
  - fix: geomap coords not updated when switiching to topo mode
  - fix: linux build
19.02.2019 - v1.4.1.4822
  - add: video frame delta block
  - add: video image morphological operator block
18.02.2019 - v1.4.1.4819
  - add: experimental movement of atennas in files using DDCC
17.02.2019 - v1.4.1.4817
  - add: transparency for colors in drone ranges
  - fix: initial antenna settings for jammer block
17.02.2019 - v1.4.1.4815
  - fix: JSIQA IQ processing problems
16.02.2019 - v1.4.1.4813
  - add: details control for range domes
  - fix: Workaround for Qt bug. Initial width of menu is not correct. You need to open the menus a second time to get the correct width. Related to items with a shortcut.
15.02.2019 - v1.4.1.4809
  - add: 184MHz mode for V6
  - add: dual JESD support for V6
  - add: new Talise Firmware
  - fix: crash with file reader and antenna coverage domes in DDCC
15.02.2019 - v1.4.1.4806
  - add: color control for hex grid on range domes
14.02.2019 - v1.4.1.4804
  - add: convolution video operator
  - fix: crash during stale antenna data when showing antenna coverage domes
  - fix: crash during startup with early warning message
14.02.2019 - v1.4.1.4802
  - add: Added menu item to show / hide the RibbonBar.
13.02.2019 - v1.4.1.4798
  - add: buildings and zones in secondary map of DDCC
  - fix: axis PTZ zoom factor
  - fix: missing hex grid on area coverage domes in DDCC
  - fix: remove jammer antenna range setting in DDCC
13.02.2019 - v1.4.1.4794
  - add: SUITE-733 show 3D coverage domes
11.02.2019 - v1.4.1.4791
  - add: SUITE-738 drone and category name to drone detection block output
  - fix: position tracking with 2nd view in DDCC
11.02.2019 - v1.4.1.4788
  - add: image processing blocks
  - add: second JESDI channel for V6 config
  - add: use V6 packet ID for sweep and frequency change
10.02.2019 - v1.4.1.4784
  - fix: material management in DAE reader
08.02.2019 - v1.4.1.4781
  - fix: Improved Save / Load User Defaults menu creation
07.02.2019 - v1.4.1.4776
  - fix: mac build
07.02.2019 - v1.4.1.4773
  - fix: initialize all fields in drone detection data structure to reduce clutter in json on http response
  - fix: linux and mac build
  - fix: linux and mac build
  - fix: lockup in json formatter for infinite or nan numbers
  - fix: mac/linux build
  - fix: V5 watchdog restart on initial startup
07.02.2019 - v1.4.1.4768
  - fix: Infinite loop in geomap_jammers
06.02.2019 - v1.4.1.4764
  - add: second usb streaming channel for V6
05.02.2019 - v1.4.1.4759
  - add: velocity for ADSB targets
05.02.2019 - v1.4.1.4756
  - add: independent range for camera coverage in ddcc
  - add: serial number for Axis PTZ
04.02.2019 - v1.4.1.4750
  - add: lightbridge 2 remote
  - add: use config alpha channels for antenna ranges
03.02.2019 - v1.4.1.4745
  - fix: SUITE-734 Alpha color regulator for Colorcontrol
03.02.2019 - v1.4.1.4743
  - add: secondary 2D map view to DDCC
02.02.2019 - v1.4.1.4741
  - add: ADSB Plane to drones database
  - add: more inputs for DDCC
31.01.2019 - v1.4.1.4733
  - fix: unix build
31.01.2019 - v1.4.1.4729
  - add: drone config for mavic in 5.7GHz
  - add: Error messages will be displayed on the status bar
  - fix: Global application shortcuts stopped working after loading / creating a new mission
  - fix: paths for drone detection database in documents folder
  - fix: receiver replication in scan groups due to multiple HTTP paths to block
  - fix: SUITE-668 Message if rtsa opens twice or more on the same system
  - fix: vertical placement of chart titles for V5, RSA and ISOLog
29.01.2019 - v1.4.1.4720
  - add: support JSIQA marshalled json for HTTP server block
  - fix: SUITE-731 antenna coverage heatmap not shown in top mode
29.01.2019 - v1.4.1.4717
  - add: resolution switch in Axis PTZ
26.01.2019 - v1.4.1.4713
  - add: offset to watermark in DDCC
26.01.2019 - v1.4.1.4708
  - add: mjpeg compression for images and video streams in rtsa files
25.01.2019 - v1.4.1.4705
  - add: aartos watermark to dds
  - add: video output connector for analog video decoder
  - add: zoom for infrared channel in axis PTZ
  - fix: crash when shutting down axis PTZ block
  - fix: random crash when changing config values in sweep block
25.01.2019 - v1.4.1.4699
  - add: axis PTZ support
  - fix: max build
24.01.2019 - v1.4.1.4697
  - fix: crash in dron detection caused by ADSB decoder and single fake antenna
24.01.2019 - v1.4.1.4695
  - add: base implementation of 3D models for geo location and map
  - fix: linux build
  - fix: NTSC video decoder for V5
23.01.2019 - v1.4.1.4691
  - add: V6 driver code for Bulk command channel
  - add: V6 firmware code for Bluk command channel
22.01.2019 - v1.4.1.4686
  - add: overlapped USB read/write test for V6
18.01.2019 - v1.4.1.4673
  - fix: Wrong productname in installer. Error introduced last year while editing the version.h
18.01.2019 - v1.4.1.4669
  - add: SUITE-720 show 3D range domes around antennas
  - fix: crash with hidden iso log window
  - fix: memory leak in drone detector block
16.01.2019 - v1.4.1.4663
  - fix: file writer blocking input stream if more than consecutive packets with zero time distance in stream
  - fix: Potential crash in BlockGraph editor
  - fix: SUITE-713 Content of Blockgraph editor not correctly scaled
15.01.2019 - v1.4.1.4652
  - add: SUITE-722 capture indicator in wrapped spectrum block
  - fix: SUITE-721 gaps in wrapped spectrum graphs
11.01.2019 - v1.4.1.4644
  - fix: mac and linux build
  - fix: mac build
10.01.2019 - v1.4.1.4641
  - add: additional channel for WiFi Digital Video drone
09.01.2019 - v1.4.1.4639
  - fix: empty UART buffer before new transfer
08.01.2019 - v1.4.1.4636
  - add: receiver clock config for V6
08.01.2019 - v1.4.1.4634
  - add: Version with 921.600 baud
  - fix: mac build
06.01.2019 - v1.4.1.4630
  - fix: crash in multi waterfall when connecting V5 without ISOlog
04.01.2019 - v1.4.1.4624
  - fix: single suppresion for externaly detected drones
04.01.2019 - v1.4.1.4622
  - add: WiFi network for drones.xml
04.01.2019 - v1.4.1.4620
  - add: energy for SSID based drone detection
  - add: prepare WiFi SSID based drone detection
  - fix: value size not 16 in JSIQA
04.01.2019 - v1.4.1.4616
  - add: debug print to USB
  - add: Uli's Transmit
  - fix: add sleep
  - fix: read version string after app start
03.01.2019 - v1.4.1.4610
  - fix: multiple problems in UART protocol
02.01.2019 - v1.4.1.4608
  - add: new FPGA SPI communication code for V6
02.01.2019 - v1.4.1.4606
  - add: Frontend Board communication via FPGA
  - add: V6 Firmware with Frontend communication via UART<->FPGA at debug speed of 115.200 baud
02.01.2019 - v1.4.1.4602
  - add: batch and small sample boost to neural net training settings
  - add: WiFi SSID/Drone detector plugin
31.12.2018 - v1.4.1.4598
  - add: New translation for Thai
29.12.2018 - v1.4.1.4594
  - add: factory info with block info in JSIQA
  - add: JSIQA class and super declaration
  - fix: clear documentaion on close/terminate for JSIQA plugins
  - fix: JSIQA parse error introduced with lambda
  - fix: remove trace from jsiqa interpreter
26.12.2018 - v1.4.1.4587
  - add: js lambda support for JSIQA
21.12.2018 - v1.4.1.4578
  - fix: MacOS FTDI driver communication
21.12.2018 - v1.4.1.4576
  - add: ditone drone detection pattern
  - add: SUITE-710 auto delete of old files based on folder size
  - fix: SUITE-721 fix DDCC layout problem caused by jammer toolbars not scalable
19.12.2018 - v1.4.1.4568
  - add: HW assisted sweep mode
  - fix: SUITE-715 default switch time not used
18.12.2018 - v1.4.1.4563
  - add: fast DC offset correction block to V6
  - fix: crash in ISO log view
18.12.2018 - v1.4.1.4560
  - add: SUITE-648 warning and statistics re. ISOLog switch times
  - fix: crash when writing PDU block output to file
18.12.2018 - v1.4.1.4557
  - add: Added translated tooltips for the language menu items
  - add: Feedback Dialogs can now submit System Details
  - add: Fixed a bug when switching the languages
  - fix: mac build
16.12.2018 - v1.4.1.4550
  - add: watt as unit for config items
  - fix: crash when exceeding 8 scan groups
14.12.2018 - v1.4.1.4546
  - fix: reference lvel in V6
13.12.2018 - v1.4.1.4544
  - add: text to button link in jsiqa
  - fix: mac build
12.12.2018 - v1.4.1.4540
  - add: dynamich on/off fasz hopping mode in V6
  - add: SUITE-708 rotating sync requests for http relay jammer
  - fix: crash in iq histogram
  - fix: crash in tile map server on 404 in openstreetmap response
  - fix: mac build
  - fix: mac build
08.12.2018 - v1.4.1.4530
  - add: volumetric 3D histogram block
07.12.2018 - v1.4.1.4526
  - fix: crash when loading drone mission with configured voice, on a system with no voice installed
06.12.2018 - v1.4.1.4524
  - add: gain adaption in V6 hw block
05.12.2018 - v1.4.1.4519
  - add: floating point support for V6
04.12.2018 - v1.4.1.4517
  - add: float formats to V6
  - add: manual agc test for V6
04.12.2018 - v1.4.1.4513
  - fix: crash in reosion block when changing frequency
  - fix: crash when changing slice size in IQ oscilloscope
  - fix: SUITE-706 filereader does not remember selected range
02.12.2018 - v1.4.1.4507
  - fix: SUITE-707 no correction display in HF path block
01.12.2018 - v1.4.1.4505
  - add: center frequency settings for V6
  - fix: IQ slicer for larger times
30.11.2018 - v1.4.1.4502
  - add: SUITE-466 startup and stop delay for file writer automatic segment recording
  - fix: crash in spectrum shape detector when selecting too small frequency span
  - fix: SUITE-699 Calibration Block does not find the related calibration files in the cdata folder
  - fix: switch to QSaveFile for rtsa streams to avoid reading and writing to the same file
  - fix: viewport odd/even pixel size problems in QT window resizing
30.11.2018 - v1.4.1.4496
  - add: Global RESTful API for RTSA Suite
  - add: key events to JSIQA
  - add: Start and Stop recording graph message support for JSIQA and HTTP blocks
29.11.2018 - v1.4.1.4491
  - add: more filter options for DDCC history table
  - fix: SUITE-697 store layout of DDCC view
  - fix: SUITE-698 red distortion at start of DDCC due to target heatmap
29.11.2018 - v1.4.1.4487
  - fix: An opened Frequecy Selection dialog could prevent the app from closing
  - fix: SUITE-703 Multiwaterfall missing data display in loop
  - fix: SUITE-720 ghost legend in multi waterfall
28.11.2018 - v1.4.1.4482
  - fix: crash when removing marker
  - fix: http client shutdown
  - fix: https client and server connections
  - fix: linux build
  - fix: SUITE-701 MultiSpectral 3D block is not showing any data
26.11.2018 - VERSION_H
  - add: SUITE-694 Wrapping spectrum view
24.11.2018 - v1.4.1.4461
  - fix: crash in drone detection path due to empty packets at segment end
  - fix: crash in waterfall and legend display due to changing antennas
  - fix: crash with RF V5 remote RSA client due to moved certificate path
23.11.2018 - v1.4.1.4458
  - fix: file writer adding old data at start of file
  - fix: linux build
  - fix: linux build
  - fix: linux build by disabling AVX2
22.11.2018 - v1.4.1.4454
  - fix: input of degree values in config items
  - fix: linux build
  - fix: mac build
  - fix: next gcc build fix attempt
  - fix: Possible problem to find the correct dmp file for the crashreport
  - fix: startup problems of IQ signal generator
21.11.2018 - v1.4.1.4448
  - fix: follow target mode in DDCC
20.11.2018 - v1.4.1.4446
  - add: Added CPU requirements check. Mininum CPU feature set is now support of AVX ( usually supported since 2011 )
  - add: SUITE-658 notification when blocks are streaming invalid data into an input
  - add: SUITE-692 add 3D Cursor slice view to 3D histogram volumetric
20.11.2018 - v1.4.1.4438
  - add: SUITE-691 add block title to legend
19.11.2018 - v1.4.1.4433
  - add: lock free dsp scheduler
  - fix: http streaming of limited number of samples
19.11.2018 - v1.4.1.4427
  - add: jesd test patterns to V6
19.11.2018 - v1.4.1.4425
  - add: AVX compiler options
  - fix: mac build
14.11.2018 - v1.4.1.4385
  - add: Data MigrationDialog
13.11.2018 - v1.4.1.4382
  - add: axis selection for 3D autorotate
  - add: color histogram to IQ 3D Histogram Volumetric
  - add: color map for IQ 3D Histogram Volumetric
13.11.2018 - v1.4.1.4379
  - fix: error message on FPGA start for V6
13.11.2018 - v1.4.1.4375
  - add: ARM microcode upload burst mode for SPI in V6
  - add: JESDI scramble config for V6
  - add: multi byte SPI write for V6
  - add: shutdown code for 9008 in V6
  - fix: add special return code
  - fix: do not start RTOS App twice
  - fix: Tripple Transfer Mode
  - fix: Version 0.1.4
12.11.2018 - v1.3.1.4357
  - add: ad9528 init code for V6
  - add: init RF frontend on V6
  - fix: Firmware GPIO fix and Version with channel ID
  - fix: support Reset in SPI Firmware
12.11.2018 - v1.4.0.4351
  - add: initial Channel 1 Firmware image
  - add: more init code for V6
  - add: more talise firmware
  - add: spectran V6 arm firmware
  - add: Spectran V6 Channel 2 Firmware image (SPI debug prototype)
11.11.2018 - v1.4.0.4343
  - add: "physics" entry for drone configuration
11.11.2018 - v1.4.0.4341
  - add: focus target animation mode
10.11.2018 - v1.4.0.4339
  - fix: bottom border display of zones in DDCC with topo enabled
10.11.2018 - v1.4.0.4337
  - add: cone outlines in DDCC map
  - add: support for recursive nodes in 3D models
  - fix: crah with rotating map view and active zones
09.11.2018 - v1.4.0.4333
  - add: enable and disable of vertical separator lines in 3D drone trails
  - fix: crash in script block release build due to path changes
09.11.2018 - v1.4.0.4331
  - add: control for drone trail opacity
09.11.2018 - v1.4.0.4329
  - add: SUITE-673 added persistence config to iso log direction heatmap
  - fix: close 3D trail at current drone position
  - fix: linux build
08.11.2018 - v1.4.0.4317
  - add: 3D models for drones and controller in DDCC
06.11.2018 - v1.4.0.4296
  - add: SUITE-673 heatmap to ISO log direction block
05.11.2018 - v1.4.0.4290
  - add: drone direction indicator to 3D maps
04.11.2018 - v1.4.0.4287
  - add: texture size and trilinear mipmap filtering for topo maps
  - fix: remove memory leaks with map tiles
03.11.2018 - v1.4.0.4285
  - add: config color for offline cameras and jammers
  - fix: click position of DDCC map toolbar items
  - fix: crash when saving DDCC event recording
01.11.2018 - v1.4.0.4270
  - add: TALISE library for V6
  - fix: linux build
31.10.2018 - v1.4.0.4262
  - add: IQ ramp with TripleBuffer in Rampdata
  - add: sample Firmware for SpectranV6 Channel1
  - add: V6 USB transfer of "IQ" data
  - fix: add IQ ramp
  - fix: ramp data on bulk-in
  - fix: Version 0.1.1
28.10.2018 - v1.4.0.4252
  - fix: crash when marshalling huge data elements in JSIQA
  - fix: linux build
27.10.2018 - v1.4.0.4249
  - add: IQ osciolloscope to JSIQA
  - fix: precision of timing axis in waterfall
  - fix: starting filter preload in IQ demodulator
26.10.2018 - v1.4.0.4247
  - fix: Problem when running the app. Defaults paths weren't created correctly
25.10.2018 - v1.4.0.4244
  - add: CyAPI.lib to SpectranV6
  - add: initial framework classes for Spectran V6 Block
  - add: SUITE-685 acceleration now configurable in drone xml for drones and categories
  - add: SUITE-685 added Kalman observation noise configuration to signal locator block for noisy environments
  - add: SUITE-685 made Kalman observation noised dependent on detection probability
  - fix: potential crash on drone video channel switch
25.10.2018 - v1.4.0.4238
  - fix: CPU usage indicator in unary arithmetic block
  - fix: restart of timeshift recording block
23.10.2018 - v1.4.0.4229
  - fix: color histogram in time shift block
  - fix: replay of IQ streams from start to end
  - fix: timing of overlapped FFT spectra
22.10.2018 - v1.4.0.4227
  - fix: missiing connection state change after connection in graph editor
  - fix: vertical status chart placement and scaling in e.g. spectran block
21.10.2018 - v1.4.0.4223
  - fix: Crash when autosave tried to write a backup into a write protected FOLDER
20.10.2018 - v1.4.0.4221
  - add: Added a new switch in the configuration dialog. Non-Interactive GUI. Prevents unwanted dialogs when operating the RTSA in an operatorless environment
  - add: dphi function to IQ in JSIQA in FLARM preparation
  - add: SUITE-663 Automatic save of missions in progress
  - fix: Compiler break
19.10.2018 - v1.4.0.4215
  - add: gui performance bar to graph editor
18.10.2018 - v1.4.0.4209
  - fix: crash in grid waterfall on stream switch
17.10.2018 - v1.4.0.4207
  - add: packet drop block for stress testing
  - add: target extend for auto follow of cameras in DDCC
  - fix: config item sub units lost due to illegal address of QVector element
  - fix: segment start flag error on queued input overflow
  - fix: SUITE-682 wrong map source loaded
17.10.2018 - v1.4.0.4192
  - fix: initial wild rotation of PTZ camera
16.10.2018 - v1.4.0.4187
  - fix: out of sync of drone index in drone database of master and slaves
  - fix: out of sync problem of PTZ movement
  - fix: wrong drone icon position if antenna order changes or is not in right order from start
16.10.2018 - v1.4.0.4178
  - add: energy offset and cross/energy bias config to drone position block
  - add: SUITE-532 add trail for events of history table
  - add: SUITE-532 show trail history in 3D view
  - fix: SUITE-672 adding a channel to am/fm block crashes the RTSA
15.10.2018 - v1.4.0.4172
  - add: display of energy based position prediction as diamond in drone location block
  - fix: tracking across video frequencies, when more than one jump occurs in sequence
13.10.2018 - v1.4.0.4169
  - fix: flickering of remote control config items
  - fix: layout of remote control config items in high dpi displays
12.10.2018 - v1.4.0.4167
  - fix: crash when showing too many flight predictions
12.10.2018 - v1.4.0.4165
  - add: debug info for PTZ
12.10.2018 - v1.4.0.4163
  - add: save remote systems to DDCC
  - fix: active region of health tooltip
  - fix: crash on reload/close when mouse cursor hovers n map view
12.10.2018 - v1.4.0.4161
  - fix: crash in drone video pattern detector when autodetecting channel
  - fix: Kalman filter based flight path prediction
11.10.2018 - v1.4.0.4157
  - fix: SUITE-677 DDCC does not show any detections
11.10.2018 - v1.4.0.4155
  - add: script blocks and script DSP blocks to CPU usage display
  - add: select operation to multi source operands arithmetic block
  - add: temporal auto correlation block
  - fix: minor memory leaks
  - fix: multiple tracking of same drone
  - fix: sweep duration in IQ signal generator block
10.10.2018 - v1.4.0.4152
  - add: Auto Recover for Mission files
  - fix: Crash right after loading a mission
10.10.2018 - v1.4.0.4150
  - fix: crash when building a recursive chain of http client and server
  - fix: http sample request returning empty sample for energy or detection payload
06.10.2018 - v1.4.0.4143
  - add: more drone remote patterns
05.10.2018 - v1.4.0.4140
  - add: find and goto line to script block
  - fix: crash if radial controller cannot be initialized
  - fix: stack trace in log file for windows
  - fix: SUITE-627 file replay not starting on DD command center start system
  - fix: SUITE-675 drone icon not vanishing after end of detection
04.10.2018 - v1.4.0.4130
  - fix: font issues in script block
02.10.2018 - v1.4.0.4118
  - add: more documentation for JSIQA plugin dll
  - add: terminate function for JSIQA plugin
02.10.2018 - v1.4.0.4114
  - add: file name handling to jsiqa fs
  - fix: path config json conversion
  - fix: SUITE-672 added initial reset for RSA 306 for more error messages
29.09.2018 - v1.4.0.4108
  - add: prepare auto regression test of drone detection
  - fix: end of stream propagation in drone location detector
28.09.2018 - v1.4.0.4106
  - add: basic DLL plugin support for JSIQA
  - add: SUITE-669 add scan group config to Tek
  - add: support for cpu usage in IQ signal generator
  - fix: linux build error
  - fix: mac build
  - fix: reduce mavic rc false alarms
26.09.2018 - v1.4.0.4098
  - add: dsp load and cpu bound stats to blocks
25.09.2018 - v1.4.0.4094
  - fix: crash in tree view when setting string completion in hidden widget
  - fix: packet rate value in connectors
  - fix: SUITE-646 rework neural network training process
22.09.2018 - v1.4.0.4089
  - fix: crash when connection from http client failed
21.09.2018 - v1.4.0.4086
  - add: stats, health and error information to RTSA and DSP blocks
  - fix: BlockGraphEditor layout 'List', wrong calculation of group height. The last item wasn't displayed.
21.09.2018 - v1.4.0.4082
  - add: Improved Graph layout, Zoom Buttons can now change their positions or visibility ( on / off )
  - add: SUITE-640 flight path prediction
20.09.2018 - v1.4.0.4077
  - add: "const" and "let" to jsiqa
  - add: Tooltips for the BlockGraphEditor. Can be enabled in the 'Settings' Group
  - add: Two new layout modes for the BlockGraphEditor: Small, List. Can be selected in the 'Settings' Group
  - fix: SUITE-649 performance problems with high resolution images
  - fix: SUITE-651 crash in drone pattern detector
  - fix: SUITE-662 background color in sector waterfall
  - fix: SUITE-665 delayed update of once trigger
19.09.2018 - v1.4.0.4070
  - fix: missing fields in combined drone tracking
18.09.2018 - v1.4.0.4068
  - add: compression for IQ streams
  - add: VT30 drone detector
  - fix: crash in ISO log directional find
14.09.2018 - v1.4.0.4058
  - add: realtime emulation of file replay uses current system time as stream time
  - fix: backup of P4 server
  - fix: Docking System wasn't able to load floating dock correctly
  - fix: Fixed a layout problem with floating docks
  - fix: slave replay now working with "contiguous" mode
12.09.2018 - v1.4.0.4049
  - add: support for external processes in JSIQA
  - add: support for fake drone beam detection
12.09.2018 - v1.4.0.4047
  - fix: Potential crash when selected Docking System main tabs
12.09.2018 - v1.4.0.4042
  - fix: FIx for DragNDrop crash on MacOS
12.09.2018 - v1.4.0.4039
  - fix: Fixed openGL issue under MacOS
10.09.2018 - v1.4.0.4031
  - add: adsb decoder module to jsiqa libraries
  - add: serial config to jsiqa
  - add: SUITE-641 workaround for broken V5 settings when switching across 4Ghz boundary
08.09.2018 - v1.4.0.4025
  - add: Create derived factory dialog now stores its config into the mission file
  - add: serial port IO to JSIQA
07.09.2018 - v1.4.0.4022
  - add: IQ SIMD functions in JSIQA
  - add: prepare ADS-B parsing
05.09.2018 - v1.4.0.4013
  - fix: crash when adding HTTP server and client to same mission in unexpected order
04.09.2018 - v1.4.0.4011
  - fix: SUITE-627 placement of camera control in DDCC toolbar
  - fix: SUITE-633 text scaling on map control buttons in DDCC
31.08.2018 - v1.4.0.4002
  - fix: Most Factory Missions couldn't be loaded because of an mission internal factory
28.08.2018 - v1.4.0.3998
  - add: New Feedback buttons in the RTSA Ribbonbar.
25.08.2018 - v1.4.0.3992
  - fix: Zoom functionatily in Block Editor was broken
21.08.2018 - v1.4.0.3978
  - add: Specific InfoCenter warnings can now be enabled/disabled in the Configuration Dialog
  - fix: SUITE-583 Wrong Reset to Factory Default
17.08.2018 - v1.4.0.3972
  - add: AARONIA RTSA Experience Improvement
16.08.2018 - v1.4.0.3969
  - add: Systemtray message is now connected with the InfoCenter. Click on the popup will open the InfoCenter.
  - fix: SUITE-624 Broken Mission when opened without license
16.08.2018 - v1.4.0.3965
  - add: Dialog for the programm version check
  - fix: linux build
15.08.2018 - v1.4.0.3962
  - add: cone color control for PTZ camera
  - add: hiding of script config for script blocks
  - fix: name dependency of interpreter config in script block
15.08.2018 - v1.4.0.3960
  - fix: SUITE-632 jammer cone orientation in topo mode
15.08.2018 - v1.4.0.3951
  - add: Info Center, double click on notifications can now execute actions. E.g. double click on the 'New app version found' will open a WebBrowser with the RTSA download site
  - add: keyboard navigation in tables
  - add: Mulhouse protocol streaming
  - add: trigger status to IQ scope
  - add: UDP support for Mulhouse protocol
  - fix: end of segment handling in IQ scope
14.08.2018 - v1.4.0.3948
  - add: timeshift chart item for JSIQA block
  - add: window overlap for IQ to spectrum FFT
  - fix: IQ resampler for odd sample sizes
13.08.2018 - v1.4.0.3945
  - fix: memory leak in RSA 306 block
  - fix: short IQ sequences did not work in IQ Scope block
11.08.2018 - v1.4.0.3942
  - add: add lines to text tables
  - fix: crash in IQ histogram block for packets with <16 samples
  - fix: crash when switching between grid styles in 3d blocks
  - fix: dropping of single events in IQ scope during scrubbing
  - fix: flickering 3D cursors
  - fix: millisecond display in config items
  - fix: short sequence replay in recorder block
  - fix: SUITE-627 DDCC toolbar alignment broken after DPI change
10.08.2018 - v1.4.0.3931
  - add: peak detection dsp stream block
  - add: pulse to IQ signal generator
  - fix: SUITE-605 directional finder should work with hopping scangroups
06.08.2018 - v1.4.0.3925
  - fix: SUITE-539 crash when opening config item in drone video pattern detector
02.08.2018 - v1.4.0.3919
  - fix: remove incomplete info center checkin from build
  - fix: SUITE-612 vanishing health status of http client
01.08.2018 - v1.4.0.3916
  - add: started documentation for JSIQA script block and libraries
  - fix: SUITE-611 crash of DD replay with no antennas in recording
31.07.2018 - v1.4.0.3910
  - add: health status for RSA306
  - add: spectrum view to script block
  - add: SUITE-623 start/stop and frequency settings for Spectrum Stitcher block
  - fix: number of bins display in waterfall legend
  - fix: SUITE-617 crash when removing ISO log from block graph
30.07.2018 - v1.4.0.3905
  - add: waterfall and histogram view to JSIQA
  - fix: jumping slider at movement start
28.07.2018 - v1.4.0.3902
  - fix: JSIQA crash due to GG while allocating closure
27.07.2018 - v1.4.0.3900
  - add: ping command and error processing to jammer block
27.07.2018 - v1.4.0.3898
  - add: font style and placement to script text fields
  - add: new group 'Frequent Blocks' in the BlockGraphEditor
27.07.2018 - v1.4.0.3894
  - fix: duplicate member variable layout info might have caused font and other minor layout problems in charts
  - fix: SUITE-618 crash in V5 driver when signal hopping
26.07.2018 - v1.4.0.3891
  - add: SUITE-622 add temperature and humidity to status
  - fix: Popup menu identicator in Block Graph Controller widget was positioned wrong
  - fix: SUITE-619 manual jamming south with omnidirectional antenna
24.07.2018 - v1.4.0.3884
  - add: SUITE-582 RTSA Block lock mode
  - fix: SUITE-583 Wrong Reset to Factory Default
21.07.2018 - v1.4.0.3878
  - fix: SUITE-613 crash in DDCC info tab
18.07.2018 - v1.4.0.3871
  - fix: SUITE-607 crash on mission open due to connected hidden connector
17.07.2018 - v1.4.0.3869
  - add: startup and shutdown command for http jammer
16.07.2018 - v1.4.0.3867
  - fix: SUITE-606 sticky demo mode with drone detection block
10.07.2018 - v1.4.0.3857
  - add: Added suport for derived block factories
  - add: SUITE-589 GPS status and health information for ISO Log and GPS Block
10.07.2018 - v1.4.0.3853
  - fix: SUITE-557 trace display in sector waterfall
  - fix: SUITE-601 drag bitmap live over topo data
  - fix: SUITE-603 resetting display on stream change in sector waterfall
  - fix: SUITE-604 show antenna coverage in file reader based antenna setup
07.07.2018 - v1.4.0.3845
  - add: connector priority to block graph layouter
06.07.2018 - v1.4.0.3842
  - add: health/status for robin radar block
06.07.2018 - v1.4.0.3840
  - add: New images for blocks
06.07.2018 - v1.4.0.3838
  - add: device level key for Tektronix Devices
  - add: SUITE-592: Add optional expiration date to keys
  - fix: SUITE-602 Jammer Azimuth offset not working in DDCC
05.07.2018 - v1.4.0.3832
  - fix: SUITE-597 hovering drone elements with topo data
04.07.2018 - v1.4.0.3830
  - fix: SUITE-596 RTSA Suite Style does not change Blockgraph Editor background
04.07.2018 - v1.4.0.3827
  - add: bird and fixedwing categories to drones.xml
29.06.2018 - v1.4.0.3817
  - add: non drone icons for robinradar
  - fix: iso log directional find chart
  - fix: SUITE-594 Detection problem with MapTopography.key in License Manager
28.06.2018 - v1.4.0.3812
  - add: SUITE-591 direction indicator for signal locator block
  - fix: Fixed several bugs in the BlockGraphEditor
  - fix: SUIE-593 use non antennas for coverage map
28.06.2018 - v1.4.0.3804
  - fix: Prevent cyclic connections in the BlockGraph editor
  - fix: Undo for Delete Block operation was broken
27.06.2018 - v1.4.0.3801
  - fix: radial controller with DDCC
  - fix: rtsa files for jsiqa structured data
26.06.2018 - v1.4.0.3796
  - fix: Fixed build on Mac. RedialController is only supported under Windows
  - fix: linux build
23.06.2018 - v1.4.0.3788
  - add: TCP sockets to jsiqa script
22.06.2018 - v1.4.0.3786
  - add: check box to disable scan groups in ddcc
  - add: SUITE-584 show/hide map control toolbar
  - fix: SUITE-566 turn off jammer on stop system
  - fix: SUITE-586 do not reset V5 SNR selection if device is not present
  - fix: SUITE-587 Language Switch Crash
21.06.2018 - v1.4.0.3777
  - add: clock source selection for TeK block to avoid drifting clocks while stitching
  - fix: stticher status display did not scale until moved
20.06.2018 - v1.4.0.3775
  - add: Changed icons for FileReader and FileWriter
19.06.2018 - v1.3.1.3766
  - add: SUITE-556 highlight selected sector in DDCC
  - fix: memory leaks
16.06.2018 - v1.3.1.3758
  - fix: improve file writer idle render performance
15.06.2018 - v1.3.1.3756
  - fix: low noise level stream stitcher sync problems with Tek
  - fix: video stream latency reduction
13.06.2018 - v1.3.1.3748
  - add: promises to script libraries
11.06.2018 - v1.3.1.3740
  - fix: thread performance problem with double value types due to mLocale member
10.06.2018 - v1.3.1.3737
  - fix: crash with spectrum stitching in time compression block
05.06.2018 - v1.3.1.3728
  - add: initial shot at mulhouse protocol
04.06.2018 - v1.3.1.3723
  - add: SUITE-572 add serial number check to PTZ camera
03.06.2018 - v1.3.1.3717
  - add: SUITE-580 add timeout counter to jammer toolbar
01.06.2018 - v1.3.1.3713
  - add: control zoom size with cursor targeting of DDCC camera control
  - add: SUITE-575 start camera on start system of DDCC
31.05.2018 - v1.3.1.3708
  - add: SUITE-574 add set to north and go to north buttons
  - fix: check icon size
  - fix: SUITE-576 minimum size of DD info block broken due to full jammer command bar
30.05.2018 - v1.3.1.3702
  - fix: mouse position workaround for dragging tabs in multimonitor high DPI setup on windows
  - fix: SUITE-569 Lock Jammer Settings not working after mission load
  - fix: SUITE-570 Add Range to locked setup elements
29.05.2018 - v1.3.1.3695
  - fix: assert in spectran block
27.05.2018 - v1.3.1.3692
  - add: map control toolbar
27.05.2018 - v1.3.1.3689
  - add: control and direction for PTZ
  - add: max time and cooldown for jammer
27.05.2018 - v1.3.1.3687
  - add: remote control bar to ddcc
26.05.2018 - v1.3.1.3683
  - add: grid waterfall
  - add: grid waterfall item
  - fix: linux build
26.05.2018 - v1.3.1.3677
  - add: Tooltip for Dock tabs
  - fix: server connection table stats display
25.05.2018 - v1.3.1.3673
  - add: Added item in ConfigItemTreeDialog to set the number of DSP threads
24.05.2018 - v1.3.1.3669
  - add: wiper button to camera control
  - fix: crashes due to slow waterfall with iso log sectors
  - fix: multi camera control in DDCC
24.05.2018 - v1.3.1.3665
  - #add: SUITE-561 sort health status by name
  - add: SUITE-564 add suppress single detection flag to target classification setting
  - fix: crash in DDCC with too many Cameras/Jammers/Antennas
24.05.2018 - v1.3.1.3661
  - add: icons and header to ddcc toolbars
22.05.2018 - v1.3.1.3654
  - add: first shot for jammer toolbar
  - fix: crash in startup of script block
22.05.2018 - v1.3.1.3646
  - fix: low memory race conditions in JSIQA garbage collector
  - fix: startup problem with autostart in script block
19.05.2018 - v1.3.1.3642
  - Add: Futaba T3BV Remote Control detector
  - add: multiple video outputs to PTZ block
  - fix: stream end handling while looping in histogram block
18.05.2018 - v1.3.1.3631
  - add: Block configuration entries can now be filtered
  - add: status bar to script block
  - add: stream multiplexer block
17.05.2018 - v1.3.1.3628
  - add: IO system for script block
  - fix: add timing restart check for V5 sweep
  - fix: extend sweep down to 9kHz
  - fix: frequency input control for small frequency (no decimals)
  - fix: mac build
16.05.2018 - v1.3.1.3625
  - add: experimental focus control to PTZ
14.05.2018 - v1.3.1.3620
  - fix: looping with DDCC
11.05.2018 - v1.3.1.3615
  - add: language/locale selection in DDCC
11.05.2018 - v1.3.1.3613
  - fix: zone flashing by hidden drone
11.05.2018 - v1.3.1.3611
  - fix: audio alert for invisible drones
09.05.2018 - v1.3.1.3604
  - add: io system to jsiqa
  - add: SUITE-553 change custom map creation and editing by using a hamburger menu
  - add: zone detection with single antenna
06.05.2018 - v1.3.1.3594
  - add: ptz camera drone tracking
05.05.2018 - v1.3.1.3592
  - fix: SUITE-500 crash in spectrum shape detector
  - fix: SUITE-551 monitored area cannot be moved
04.05.2018 - v1.3.1.3589
  - add: streaming support for jsiqa
  - fix: linux build
  - fix: linux build
  - fix: SUITE-540 Extension not automatically save with mission or record files (Linux)
  - fix: SUITE-540 Extension not automatically save with mission or record files (Linux)
  - fix: SUITE-540 Extension not automatically save with mission or record files (Linux)
  - fix: SUITE-540 Extension not automatically save with mission or record files (Linux)
  - fix: SUITE-541 Undocked RTSA blocks cannot be resized in Linux
  - fix: SUITE-550 crash when exceeding 100 detectors in shape detector
03.05.2018 - v1.3.1.3579
  - fix: SUITE-450 Changing a block name will only work after RTSA restart
01.05.2018 - v1.3.1.3575
  - add: message system to jisqa
30.04.2018 - v1.3.1.3569
  - add: #SUITE-545 add custom pattern files for jammer antennas
  - fix: potential crash due to isolog IP display if system changed
28.04.2018 - v1.3.1.3564
  - fix: SUITE-542 health status not update in HTTP client without remote control or DDS attached
27.04.2018 - v1.3.1.3557
  - add: SUITE-455 Show IP Address in ISO Log Footer
  - fix: SUITE-538 Spectran Start button not active
26.04.2018 - v1.3.1.3553
  - fix: SUITE-535 Maximize View of undocked RTSA block does not work
  - fix: SUITE-536 Undocked RTSA blocks are not closed if a new mission was created
23.04.2018 - v1.3.1.3543
  - fix: SUITE-523 turning drag map off when changing map should fix the problem
23.04.2018 - v1.3.1.3541
  - fix: SUITE-529 crash when removing newly added HTTP server block
  - fix: SUITE-530 fixed watchdog crashes due to delayed network responses with a crashed process
23.04.2018 - v1.3.1.3535
  - add: SUITE-528 add config item to disable cone transparency and outline
21.04.2018 - v1.3.1.3531
  - add: double click and mouse wheel to control camera pan/zoom in video monitor
  - add: typed arrays to jsiqa
  - fix: linux build
  - fix: Mac Build
  - fix: Mac Installer
18.04.2018 - v1.3.1.3517
  - add: 915MHZ frequency profile
  - add: New slider control in Config Item Tree Widet
  - add: SUITE-506 frequency profiles now updated with scan group changes
  - add: SUITE-518 outline to jammer cones
  - fix: SUITE-501 IsoLOG stops spinning after V5 reset
17.04.2018 - v1.3.1.3509
  - fix: SUITE-515 scan group span now used
16.04.2018 - v1.3.1.3505
  - add: SUITE-509 add lock config checkbox to jammer setup
  - add: SUITE-510 add colors to jammer antenna config
  - add: SUITE-511 add opacity to jammer antenna config
  - add: SUITE-512 add range to jammer cone config
  - fix: add license check on mission load
  - fix: crash in ISO log block when shutting down
  - fix: SUITE-501 IsoLog does not turn in DDCC block due to stop/start of V5
15.04.2018 - v1.3.1.3501
  - add: video monitor remote control of ptz camera
  - fix: azimuth orientation
  - fix: SUITE-498 propagation of frequency profile after mission load
  - fix: SUITE-500 ignore titles of deleted blocks when creating new block
14.04.2018 - v1.3.1.3497
  - add: camera control in video monitor view
  - fix: various gc problems in jsiqa
13.04.2018 - v1.3.1.3492
  - fix: isolog startup crash
  - fix: SUITE.495 HTTP server config not correct after load
13.04.2018 - v1.3.1.3489
  - add: power button to http jammer
  - fix: Added missing HKVision dll's to the RTSA installer
13.04.2018 - v1.3.1.3486
  - add: basic camera control to DDCC
  - add: support for demo mode to drone detection block
  - fix: SUITE-496 crash when removing jammer config
12.04.2018 - v1.3.1.3484
  - fix:  RTSA Suite crash caused by missing DLLs in the Windows Installation (HK Vision DLLs)
11.04.2018 - v1.3.1.3477
  - add: embedded drone images in drone database file
  - add: network connection timeout to watchdog
  - fix: SUITE-489 crash in file reader sync mode
11.04.2018 - v1.3.1.3473
  - add: map view to PTZ camera
  - add: support for up to eight jammer inputs in DDCC
  - fix: linux build
  - fix: topography check for empty folder
10.04.2018 - v1.3.1.3467
  - add: multi drone config file support
  - add: Watchdog tool for RTSASuite
09.04.2018 - v1.3.1.3462
  - fix: jammer config with multiple device IPs
  - fix: linux build
  - fix: linux build
06.04.2018 - v1.3.1.3455
  - fix: LicenseManager couldn't find keys
06.04.2018 - v1.3.1.3453
  - fix: Memory leaks
  - fix: support for ancient ISO log protocol
05.04.2018 - v1.3.1.3450
  - add: devices table to iso log block
  - fix: invalid map center with jammer caused problems with animation
  - fix: Memory leaks
04.04.2018 - v1.3.1.3446
  - add: SUITE-272 Jammer control to DDS
30.03.2018 - v1.3.1.3437
  - add: grey default image for drones that have no actual image
  - add: HTTP replay based jammer block
  - add: scripting block
  - fix: drone detection not starting without antenna
24.03.2018 - v1.3.1.3423
  - add: SUITE-446 multi waterfall needs antenna for each stream
  - add: SUITE-447 multi waterfall needs legend for each stream
  - add: SUITE-457 multi waterfall needs frequency profile
  - Fix: Linux Installer
22.03.2018 - v1.3.1.3413
  - fix: crash with jammer show/hide in drone view legend tree
22.03.2018 - v1.3.1.3410
  - add: basic support for HKVision camera
  - add: topographic tiles web access
21.03.2018 - v1.3.1.3408
  - fix: SUITE-483 check device binding in license.xml
17.03.2018 - v1.3.1.3401
  - add: developer keys for omniscale and topomaps
  - add: feature keys for topo maps and omniscale maps
  - add: Mavic AIR Video detection
  - add: support for gz compressed topo maps
  - fix: fix memory leaks
  - fix: SUITE-478 remote config with missing unit spec for floats caused serve to crash
  - fix: SUITE-479 made HTTP path and arguments case insensitive
  - fix: SUITE-480 added escape coding to JSON formatter
15.03.2018 - v1.3.1.3376
  - fix: crash when adding isolog block to mission
  - fix: missing drone direction due to jumping antennas (GPS)
14.03.2018 - v1.3.1.3363
  - add: sides to geomap 3D with topography
13.03.2018 - v1.3.1.3353
  - add: license manager
11.03.2018 - v1.3.1.3337
  - fix: various memory leaks
10.03.2018 - v1.3.1.3334
  - add: remaining grid types to topo maps
  - fix: memory leak in graph editor
09.03.2018 - v1.3.1.3325
  - add: --nogui and --minimized startup options
  - add: 3D grid lines for degree based grids
  - add: command line options to rtsa suite
09.03.2018 - v1.3.1.3317
  - add: flowsheet showing required FPGA processing
  - add: HTTP endpoint document first draft
  - add: video pattern detection developer key
  - fix: crash due to slow opening HTTP server and uninitialized view variable
09.03.2018 - v1.3.1.3306
  - add: statistics display for HTTP client and server
08.03.2018 - v1.3.1.3302
  - add: compress RTBW calibration files
07.03.2018 - v1.3.1.3300
  - fix: Change filetype for linux shell scripts
07.03.2018 - v1.3.1.3278
  - add: jammer detection
  - add: zlib support
05.03.2018 - v1.3.1.3260
  - fix: topo map creation if map out of sight
05.03.2018 - v1.3.1.3258
  - add: flexible horizon distance in geomap
  - add: simpleconfig setting in remote config for HTTP server
  - add: SUITE-473 ddcc remote control config
  - add: SUITE-474 add https support to server
  - add: support for high detail topo maps
  - fix: SUITE-474 crash on https request with no https
  - fix: SUITE-475 crash in HTTP server with invalid remote config body
  - fix: z buffer clipping in volumetric IQ
04.03.2018 - v1.3.1.3248
  - add: multitouch rotate
  - fix: 3D orientation of multitouch rotate
04.03.2018 - v1.3.1.3245
  - add: dial support for DDCC
  - fix: highdpi font problems in DDCC
03.03.2018 - v1.3.1.3242
  - fix: added glFlush() to gl pipe on linux seems to fix opengl issues in VM
  - fix: requested gl context in chart blocks destructor
  - fix: usage of abs(int) in linux due to stdlib.h
03.03.2018 - v1.3.1.3233
  - add: topography data to map display
  - fix: location processing of WiFi detection
02.03.2018 - v1.3.1.3225
  - add: missing checkin
  - fix: crash on shutdown in release build
01.03.2018 - v1.3.1.3199
  - add: radial controller to more chart blocks
  - add: SUITE-461 check and show collisions in V5 assignment
  - add: SUITE-470 extend DJI4 video channel range
  - fix: manifest in build settings
  - fix: SUITE-467 map image coordinate confusion
  - fix: SUITE-468 crash in stream download of drone data
  - fix: SUITE-469 "step" setting in frequency profiles
28.02.2018 - v1.3.1.3186
  - fix: dependencies and build folder
27.02.2018 - v1.3.1.3178
  - fix: drone detection with TEK
  - fix: linux build
26.02.2018 - v1.3.1.3174
  - add: missing manifest file
  - fix: SUITE-463 reduced reset of atenna data in drone tracker for small movements, added second level config display in map to show GPS update status
  - fix: windows 7 compatibility of radial controller changes
26.02.2018 - v1.3.1.3170
  - add: prepare autoset button in window icon set
  - fix: remove debug file write code from ftdi producer
25.02.2018 - v1.3.1.3167
  - fix: back axis display in 3D views
24.02.2018 - v1.3.1.3165
  - add: dial control for 3D views
  - add: dial control for color and time compression in waterfall
  - add: touch support
24.02.2018 - v1.3.1.3163
  - add: frequency shifting to x axis response for dial
  - add: missing files for radial controller
  - add: radial controller support on windows
23.02.2018 - v1.3.1.3159
  - add: documentation for antenna UUID in drone detection json document
22.02.2018 - v1.3.1.3157
  - add: SUITE-458 linear scaled power units in spectrum view
  - add: workaround for compiler error
21.02.2018 - v1.3.1.3150
  - fix: crash win WiFi detector with out of bound power values
20.02.2018 - v1.3.1.3144
  - add: Added new artwork for graphlayout
  - fix: auto recover in V5
20.02.2018 - v1.3.1.3139
  - add: "none" option to scan group config
  - add: auto recover for ISO log communication
  - add: SUITE-449 GPS support for new Isolog 3D
  - add: SUITE-452 add scan group lock to spectran
19.02.2018 - v1.3.1.3134
  - fix: repeat mode in QAM signal generator
18.02.2018 - v1.3.1.3132
  - add: raster image signal generator
  - add: spread spectrum support in signal generator
17.02.2018 - v1.3.1.3129
  - add: Select multiple blocks in GraphLayout by mouse area select
15.02.2018 - v1.3.1.3122
  - fix: crash in drone detection
  - fix: stutter in drone detection with frequency jumps
  - fix: SUITE-448 V5 multi receiver mismatch
15.02.2018 - v1.3.1.3120
  - add: SUITE-423 add height settings for ISO Log
  - fix: frequency hopping in DDS
  - fix: SUITE-444 fix black and flickering drone icons
15.02.2018 - v1.3.1.3116
  - add: SUITE-413 multiple control points for color coding
14.02.2018 - v1.3.1.3113
  - add: 2.4GHz WiFi target to drone detector
  - add: SUITE-442 add numbered default names for markers
  - fix: SUITE-442 fixed incorrect check for dummy antenna if first stream had no antenna attached
13.02.2018 - v1.3.1.3109
  - add: editing options to block graph layout
12.02.2018 - v1.3.1.3105
  - add: SUITE-374 add height parameter to alarm zones and display as 3D areas
  - fix: 5GHz WIFI Video was not detected
  - fix: SUITE-441 Markers table lost in space
11.02.2018 - v1.3.1.3102
  - add: lock aspect ration in IQ histogram for I/Q axis
  - add: threshold setting for 3D volumetric IQ histogram
10.02.2018 - v1.3.1.3100
  - fix: crash when opening empty property group
  - fix: image writing during video recording
09.02.2018 - v1.3.1.3094
  - add: video capture and monitor blocks
  - add: Zoom for GraphLayout ( Ctrl + / - ) and ( Ctrl + MouseWheel )
  - fix: SUITE-440 add datawatchdog to V5
08.02.2018 - v1.3.1.3089
  - add: clock skew config for stream clock synch
  - add: remote stream clock synchronization via http
  - add: SUITE-345 sync streaming clock from client to server
  - add: textual IQ output format of AD9371 eval board to filesource import
  - fix: crash in drone detector
  - fix: graph layouter bounding box
  - fix: priority for remote clock
  - fix: SUITE-438 remote control block broken
07.02.2018 - v1.3.1.3073
  - add: set condition C0 for warning and C1 for panic in drone detection
  - add: statistics block
  - fix: single block in graph display
  - fix: SUITE-436 fix crash of log scale for some frequency/band settings
  - fix: SUITE-473 reading block config may destroy graph structure
  - fix: vertical output connector placement
06.02.2018 - v1.3.1.3062
  - add: initial column ordering for graphlayout
  - add: splines to block graph layouter
  - add: topo sort to graph layouter
  - add: volumetric 3D IQ histogram
  - fix: crash in WIFI Detector
  - fix: mac build
  - fix: mac build
  - fix: MAC build
04.02.2018 - v1.3.1.3044
  - add: horizon and sky to 3D map view
  - fix: SUITE-432 segment filter cause false alarm in drone detection
03.02.2018 - v1.3.1.3040
  - add: BlockGraphLayout dummy implementation
02.02.2018 - v1.3.1.3038
  - add: drone pattern training document
  - add: flowsheet graph layouter sample
02.02.2018 - v1.3.1.3034
  - add: 3D spindle chart for IQ data
  - add: clip mode for 3D cursor
01.02.2018 - v1.3.1.3030
  - add: SUITE-210 Rebuld ISO Log block to support ARCP protocol
30.01.2018 - v1.3.1.3013
  - add: -GL options for windows builds, enables link time code generation
  - add: buildings to 3D maps
  - add: more drone remote detection algorithms
  - add: rtbw correction for 4.588 firmware version
  - fix: qt studio debug data for msvc
  - fix: SUITE-339 x/y coordinate mixup with meter based map coordinates
28.01.2018 - v1.3.1.2993
  - add: IQ histogram 3D block
  - fix: crash in IQ preview when span > sample rate
26.01.2018 - v1.3.1.2988
  - add: 588 firmware
25.01.2018 - v1.3.1.2985
  - fix: crash in IQ resample block if span was greater than sampe rate
  - fix: demod on/off for V5 now with streaming turned off
  - fix: drone detection crash with DROCON Bugs RC
25.01.2018 - v1.3.1.2979
  - add: ortho projection to 3d views
  - fix: SUITE-242 interaction with isometric 3D display
24.01.2018 - v1.3.1.2976
  - fix: SUITE-418 Fixed and common height for Config Item Widgets
23.01.2018 - v1.3.1.2974
  - add: check box menu items
  - add: http client config via remote config block
  - add: SUITE-377 add trace lock feature to marker table
  - add: SUITE-406 GPS update mode setting
  - fix: disable demodulation on V5 open
  - fix: SUITE-420 filereader shows wrong filedata
22.01.2018 - v1.3.1.2966
  - add: IQ imbalance correction to IQ correction block
  - fix: mac build
20.01.2018 - v1.3.1.2961
  - add: health status to remote config block
  - add: isolog to remote config
  - fix: linux build
19.01.2018 - v1.3.1.2956
  - add: missing icon files
  - add: remote config block
  - add: Sound Notification when saving a mission
  - fix: docking system drag on high dpi
  - fix: Improved High DPI Monitor support
  - fix: memory leaks
19.01.2018 - v1.3.1.2944
  - add: direct processing dsp stream block
18.01.2018 - v1.3.1.2936
  - add: checksum for GPS data
  - add: SUITE-406: Ignore invalid GPS coordinates
  - fix: time and hemisphere parser in GPS data
17.01.2018 - v1.3.1.2931
  - add: error log entries to alert block, if called processes fail or http connections return an error response
  - add: load/save of individual block configurations into document files
  - fix: memory leaks
  - fix: SUITE-394 Chained Filereader does not loop after second replay
  - fix: SUITE-398 Info Tab Data Width is not saved within mission
  - fix: SUITE-401 Deleting A filereader crashes the RTSA
16.01.2018 - v1.3.1.2921
  - add: alert block
  - fix: SUITE-396 Can't open Spectrum Shape Detector in Debug mode
15.01.2018 - v1.3.1.2916
  - add: DROCON Bugs Drone Detection
  - fix: missing description for reference traces
  - fix: SUITE-390 flickering histogram in spectrum view
  - fix: SUITE-393 Adding a trace name crashes the RTSA if smooth mode is active
14.01.2018 - v1.3.1.2910
  - #add: SUITE-379 explicit excursion and threshold values for peak markers
  - fix: SUITE-389 Trace function "Add to Reference" crashes RTSA
13.01.2018 - v1.3.1.2907
  - add: SUITE-378 Add smooth range to trace legend
  - add: SUITE-381 explain trigger block
12.01.2018 - v1.3.1.2904
  - fix: crash in trigger block
12.01.2018 - v1.3.1.2902
  - add: device serial number to license file checking
  - fix: Fixed problem with unstyled message boxes opened from within the blocks
12.01.2018 - v1.3.1.2899
  - add: auto reset during open, if V5 not responding
  - add: FFT size setting to sweep block
  - add: spkie filter to v5 stream conversion
  - fix: file read and variable write order in V5 open
  - fix: SUITE-362 Color coding of V5 play button in ribbon not correct
  - fix: SUITE-383 Hiding a config item group does not hide items
11.01.2018 - v1.3.1.2893
  - fix: SUITE-385 workaround for limited line width in OpenGL
10.01.2018 - v1.3.1.2891
  - add: auto rotate animation for drone map
  - add: directional separation for spectrum shape detector
  - Add: Network Scan to RSA Block; Fix: Save RSA RTBW
  - add: SUITE-382 spline based false color density display
  - fix: change license type to binary
  - fix: float/double confusion in load/save of config items
  - fix: SUITE-375 trace name changes not reflected in marker table / config
  - fix: SUITE-380 Technical Help crashes the RTSA (no internet connection)
  - fix: time compression for multi sample spectra packets
  - fix: window gain compensation in spectrum conversion block
09.01.2018 - v1.3.1.2882
  - add: spectrum shape detector
05.01.2018 - v1.3.1.2875
  - add: block for BPSG signal generator
  - fix: hide gui window when programming signal generator
  - fix: remove too much debug output
04.01.2018 - v1.3.1.2867
  - add: SUITE-370 implement multiple RTBW calibration ranges
  - add: SUITE-371 smoothing option for traces
03.01.2018 - v1.3.1.2865
  - add: color, mode and source inputs in marker table
  - add: SUITE-372 add delta mode for markers
  - fix: display of IQ rate in V5 block
  - fix: update rate of low frequency IQ data
29.12.2017 - v1.3.1.2859
  - add: log scale frequency axis and sweeping
  - add: separate clear icons for traces in spectrum view
  - add: time cursor trace to combo view
  - fix: 64bit sample index for sample/hold traces
28.12.2017 - v1.3.1.2854
  - add: center frequency config for RTBW calibration
  - fix: rtbw calibration block with frequency config
  - fix: SUITE-366 Marker delta should be dB not dBm
27.12.2017 - v1.3.1.2849
  - fix: crash with markers in spectrum view
27.12.2017 - v1.3.1.2847
  - add: SUITE-368 add reference marker, more interactive usage of marker table and cursor
26.12.2017 - v1.3.1.2845
  - add: SUITE-369 cursor fstart and fstop readout and delta symbols
25.12.2017 - v1.3.1.2843
  - add: max range and min floor overlap handling in spectrum sweep block
  - fix: SUITE-364 more noisy block reduction
24.12.2017 - v1.3.1.2840
  - fix: SUITE-364 distored blocks in sweep
23.12.2017 - v1.3.1.2838
  - add: SUITE-351 cone width depending on kalman bearing probability
  - fix: crosshair scaling on hi dpi
21.12.2017 - v1.3.1.2833
  - fix: SUITE-363 Signal offset not propagated
  - fix: SUITE-364 Noiseblocks in spectrum sweep
21.12.2017 - v1.3.1.2827
  - fix: windows build
21.12.2017 - v1.3.1.2819
  - Add: Update RSA Server to Debian 9.3; Add UDP Discovery Service to RSA Server
  - fix: RTBW calibration block
  - fix: SUITE-360 time compression does not work with docked blocks to spectrum sweep
20.12.2017 - v1.3.1.2813
  - add: 3D ddcc map view
  - add: SUITE-344 sync input allows synchronized playback
  - fix: markers in wide spectrum sweep
18.12.2017 - v1.3.1.2808
  - fix: crash in V5 block due to racing condition with state QString variable
17.12.2017 - v1.3.1.2805
  - add: antenna coverage heatmap to DDCC
  - fix: limit bin size based on sampling
16.12.2017 - v1.3.1.2802
  - fix: drone detection minimum range filter for only 45deg segment
  - Fix: Stream Restart in RTSA Server
  - Fix: Stream Restart in RTSA Server, set inital Volume to zero of RSA and V5 Audio monitor
16.12.2017 - v1.3.1.2798
  - add: pan and scale to sector waterfall panorama image
  - add: SUITE-348 provide drone/category type visibility configuration DDCC as map checkbox tree
  - add: SUITE-354 aggregate sweep data
  - fix: polling loop and missing waits in V5 command parser
15.12.2017 - v1.3.1.2790
  - add: faster but less precission log function
  - add: SUITE 349 show DDCC antennas in offline state
  - add: SUITE-345 antenna sector filter block
  - fix: missing histogram in sweep
14.12.2017 - v1.3.1.2783
  - fix: Audio Signal Saturation
  - fix: disable geo coords in dd heatmap if map not locked
  - fix: rounding precsion on meter in config items
  - fix: SUITE-347 sector waterfall panorama picture does not full scale
13.12.2017 - v1.3.1.2778
  - add: map to remaining geo blocks
13.12.2017 - v1.3.1.2776
  - add: SUITE-339 grid to map view
  - add: SUITE-346 Histogram and Traces for sector waterfall
  - fix: precision of sector change in iso log
12.12.2017 - v1.3.1.2772
  - add: basic input check for correct stream payload
  - add: check overwrite in File Writer block
  - add: SUITE-342 hf infput path for RSA306
  - fix: SUITE-327 implement stream selection in File Reader block
  - fix: typo SPECTRA
11.12.2017 - v1.3.1.2767
  - add: multi level category support for category timeline block
08.12.2017 - v1.3.1.2763
  - add: persistence slider to DDCC heatmap
07.12.2017 - v1.3.1.2760
  - add: maximum hold for heatmap in DDCC
  - fix: second replay problem in DDCC heatmap
07.12.2017 - v1.3.1.2758
  - add: more drone heatmap histogram modes
  - fix: crash in channel utilization block
  - fix: frequency hopping with drone video detector
  - fix: SUITE-335 Symbolic buttons in IsoLog 3D - main
07.12.2017 - v1.3.1.2750
  - add: 5GHz video channels for DJI4
  - add: distance penalty to drone detection heat map
07.12.2017 - v1.3.1.2747
  - fix: crash due to missing icons
06.12.2017 - v1.3.1.2745
  - add: first shot heat map drone detection
  - fix: stream selection in file reader block
06.12.2017 - v1.3.1.2738
  - fix: crash when changing sweep boundaries on the fly
  - fix: SUITE-329 invalid initial image size on map import
  - fix: SUITE-331 add missing map cursor in drone detector
05.12.2017 - v1.3.1.2734
  - add: 4.562 V5 firmware
  - fix: build
  - fix: build
  - fix: build
  - fix: drone detection block info and neuron display
  - fix: multi detection of Mavic PRO with slightly divergent video channels
  - Fix: V5 HW FM/AM
05.12.2017 - v1.3.1.2725
  - add: icons for different layout modes
  - fix: azimuth propagation from DDCC
  - fix: build
04.12.2017 - v1.3.1.2719
  - fix: crash when dragging antenna while detection is active
02.12.2017 - v1.3.1.2714
  - add: Prepared language support for hungarian
  - fix: FileReader and FileWrite path completion
01.12.2017 - v1.3.1.2701
  - add: drone position control in DD command center system control
  - fix: drone movement in DD command center
30.11.2017 - v1.3.1.2688
  - add: FlowSheet to change the version infos
30.11.2017 - v1.3.1.2684
  - add: detector validation table for video neural net
  - fix: Possible crash after a block got an ribbon dock
  - fix: removed old audio alert setting from drone detection
  - fix: SUITE-234 entering geo locations in DD areas
  - fix: table space reserveration did not use line spacing
29.11.2017 - v1.3.1.2640
  - add: AnkCmd to be able to run FlowSheets from the command line
  - add: Block FileSource now displays the file title on the dock tab
  - add: Powershell script to create the Perforce changelists
  - fix: generic 2.4GHz directional energy
  - fix: YUNEEC remote false positives
29.11.2017 - v1.3.1.2629
  - fix: optimize gcc warnings
29.11.2017 - v1.3.1.2622
  - add: in place editing of cursor position and size in charts
  - fix: remote detection with fixed pattern and long sequence
28.11.2017 - v1.3.1.2618
  - add: neural network training for video pattern detection block
  - add: SUITE-313 set dynamic range in views
26.11.2017 - v1.3.1.2607
  - add: auto file split in file writer
  - add: file number rotation in file writer
  - add: recording button and auto start control to file writer
  - add: YUNEEC Video Detector
  - fix: neural network size for Yuneec video
24.11.2017 - v1.3.1.2601
  - fix: alert modal close and alert modal update
  - fix: check for null samples before and in AddSamples
  - fix: detect server connection with '/sample' now delivering empty text instead of empty json array
  - fix: null value in json formatter
  - fix: SUITE-300 Profile not resized for single line items (e.g. Bluetooth)
  - fix: SUITE-312 error handling in file reader and source
23.11.2017 - v1.3.1.2589
  - fix: math build
22.11.2017 - v1.3.1.2586
  - fix: build
22.11.2017 - v1.3.1.2583
  - add: SUITE-307 Playback speed setting in file read
  - add: waterfall and source peak highlighting to drone pattern detector
  - Fix: Improve V5 data Watchdog
21.11.2017 - v1.3.1.2568
  - add: SUITE-301 Punch out exclude detection areas in view display mode
  - add: SUITE-304 Color Histogram for FileReader and FileSource
  - fix: Attenuation slider now updates
  - fix: initial scale at StartStream
  - fix: server calls with correct int and float values
  - fix: SUITE-300 profile propagation
  - fix: SUITE-302 updated file source import tab
19.11.2017 - v1.3.1.2556
  - add: enable timeshift block for IQ data
  - fix: Power offset now uses dB instead of dBm
13.11.2017 - v1.3.1.2532
  - fix: invalidate drone database on save
13.11.2017 - v1.3.1.2530
  - add: initial testversion of Aaronia RTSA Suite for the web
  - fix: long signal peaks drone pattern detection
  - fix: placement of ALERT and CAUTION messages in drone detection map
  - fix: update of power area condition when changing area
13.11.2017 - v1.3.1.2524
  - add: editing of drone database in pattern detector block
  - fix: default drone image for user drone patterns
  - fix: linux build
  - fix: Pause / Config buttons in the Dock title didn't show their checked state
  - fix: State of the BlockGraphButton in Ribbon wasn't updated
11.11.2017 - v1.3.1.2514
  - add: set value command to command sequencer
  - add: show names in drone detectio areas
  - add: template strings for drone warning voice
10.11.2017 - v1.3.1.2509
  - add: light direction configuration for 3D views
  - add: load mission command ton control sequencer
  - fix: autostart button in control sequencer
  - fix: end of stream propagation in drone detection
  - Fix: Load Mission Crash (only in Linux detected)
  - fix: normal vector transform in 3D views
  - Fix: RSA-Server-Block Status
09.11.2017 - v1.3.1.2501
  - add: more display options for drone map zones
  - add: relative file paths to file config item
  - fix: AM/FM playback issues
  - fix: generic 2.4GHz detector for FrSky drones
  - fix: overlapping charts in drone detector
08.11.2017 - v1.3.1.2495
  - Fix: RTSA-Server Bootloader Dependencies
07.11.2017 - v1.3.1.2493
  - fix: SUITE-289 crash when demodulating AM/FM in a loop
07.11.2017 - v1.3.1.2491
  - add: enter/leave entries in drone log
  - add: health status to file reader
  - add: IQ demodulator block icon
  - add: loop to control sequencer
  - add: voice alert to drone dds
  - add: wait command in control sequencer
  - fix: mac build
  - fix: mac build
  - fix: mac build
  - fix: mac build
  - fix: remove limit of 5 Spectran V5
  - Fix: Spectrum Data Routing in RTSA-Server
  - fix: stack overflow in V5 block
06.11.2017 - v1.3.1.2479
  - add: Detection Zones to Map
31.10.2017 - v1.3.1.2467
  - add: config item to disable modal error message pop ups for remote stations
  - add: multi scan ranges and groups for drone detection map
  - fix: Fixed an immerdiate crash in the latest build
  - fix: remote drone false detection for DJI4 and similar
30.10.2017 - v1.3.1.2463
  - add: Added new profile AeronauticCommunications
29.10.2017 - v1.3.1.2461
  - add: dpi scaling to global config
27.10.2017 - v1.3.1.2458
  - add: Enabled the Application Configuration Dialog for the EndUser
  - add: health and status display for dds command center
  - add: start/stop buttons to dds command center
27.10.2017 - v1.3.1.2455
  - add: 'User Default Settings' can be deleted
  - fix: Annoying Qt bug workarround for styled comboboxes
26.10.2017 - v1.3.1.2452
  - add: SUITE-227 Global system and device status in drone control and command center
25.10.2017 - v1.3.1.2448
  - add: software vs. hardware equalizer with Tektronix RSA block
24.10.2017 - v1.3.1.2443
  - add: UI elements and Map to sector jammer
21.10.2017 - v1.3.1.2439
  - add: Updated the indonesion language support
20.10.2017 - v1.3.1.2437
  - add: Blocks can not get a short info
  - add: Blocks can now be ranemed
  - add: RSA306 key
17.10.2017 - v1.3.1.2420
  - fix: SUITE-273 V5 amplifier visual state not restored on default change
17.10.2017 - v1.3.1.2412
  - add: control sequencer block to auto control multiple blocks simultaneously and time based
  - fix: SUITE-273 SPECTRAN V5 block fails to switch between custom Default Setups
  - fix: SUITE-274 RTBW Calibration data was not used for short pulse suppression default mode
12.10.2017 - v1.3.1.2402
  - add: undo/redo to spectrum condition block
10.10.2017 - v1.3.1.2397
  - fix: crash loading default mission
10.10.2017 - v1.3.1.2395
  - add: DJI 4 Pro Remote
  - add: undo/redo for channel power block
  - add: undo/redo for filesource block
  - add: undo/redo for markers
  - add: undo/redo for ribbon control
  - add: undo/redo for traces
  - add: undo/redo to block editor
  - add: undo/redo to file reader block
  - add: undo/redo to ISOLog block
  - fix: duplicate block crash in debug mode
09.10.2017 - v1.3.1.2380
  - add: additional DHI 4 remote pattern
08.10.2017 - v1.3.1.2378
  - add: undo/redo for IQ signal generator
07.10.2017 - v1.3.1.2375
  - add: some undo redo for config items
  - add: undo for frequency profile
  - fix: memory leak in recursive command chain entry
06.10.2017 - v1.3.1.2369
  - fix: Adding the "plus" symbol at "Custom Channels" crashes the RTSA
05.10.2017 - v1.3.1.2365
  - add: category based config in drone map
  - add: prepare undo/redo of config items
  - add: SUITE-228 highlight values above limit in color schemes
  - add: SUITE-229 additional color bands in 3D color schemes
  - add: SUITE-230 show highest value in color scheme
  - add: SUITE-261 expanded drone detection block to 8 inputs
  - fix: memory leak cursor config items
  - fix: SUITE-263 crash with non power 2 fft
04.10.2017 - v1.3.1.2355
  - add: SUITE-258 add more inputs to drone locator
  - fix: SUITE-257 crash when selecting out of range profile in channel power
02.10.2017 - v1.3.1.2348
  - add: SUITE-244 azimuth/power chart to iso log map
  - fix: video channel clipping in drone detection
01.10.2017 - v1.3.1.2344
  - fix: added two missing DJI4 video channels at high frequency in 2.4K
29.09.2017 - v1.3.1.2339
  - fix: frequency sub channel leak in drone video channel detection
  - fix: opengl errors with 3D histogram and no data
28.09.2017 - v1.3.1.2336
  - add: full spectrum checkbox for rsa306
  - add: statistics for rsa306
  - fix: problems with fast sweeps on rsa306
27.09.2017 - v1.3.1.2331
  - add: export of event table in drone detection
  - add: repair and more file output formats to RTSAFileTool
26.09.2017 - v1.3.1.2324
  - add: export to ascii and binary matlab format from file source and file reader
23.09.2017 - v1.3.1.2318
  - add: export IQ to wv and iq.tar file formats from file source and filereader block
21.09.2017 - v1.3.1.2314
  - fix: start and end position in file reader playback
17.09.2017 - v1.3.1.2297
  - add: #SUITE-242 documentation for RTSA file format
16.09.2017 - v1.3.1.2295
  - add: #226 open input dialog when clicking on value/position/frequency label at cursor
14.09.2017 - v1.3.1.2288
  - fix: #SUITE-223 renaming of markers
  - fix: #SUITE-225 moving cursor grid lines outside of selection area
  - fix: #SUITE-235 improve file reader range selector
  - fix: crash when opening empty property group
  - fix: marker drag in waterfall view
  - fix: SUITE-227 Cursor Axis label position and color
13.09.2017 - v1.3.1.2278
  - fix: crash during shutdown with new pane system and a combo view with traces
  - fix: layout of tabbed container in views
12.09.2017 - v1.3.1.2275
  - fix: bogus error message when importing IQ or WV file
  - fix: log display of category waterfall
10.09.2017 - v1.3.1.2263
  - fix: improve recovery of V5 driver after debug event or USB problems
  - fix: SUITE-213 fix crash when downscaling legend
24.08.2017 - v1.3.1.2238
  - add: manual offset to HF frontend block
  - add: New supported language Indonesian
  - add: New supported language Indonesian
  - add: New supported language: Bahasa Melayu
23.08.2017 - v1.3.1.2233
  - add: OFDM decode mode for IQ Histogram
  - add: OFDM signal generator
  - fix: race condition in USB input buffer
22.08.2017 - v1.3.1.2227
  - Fix: SUITE-211 Background color of the blockgrapheditor changes to red when select new mission
18.08.2017 - v1.3.1.2219
  - add: combine drone detection on channel swtich
  - add: program ftdi eeprom for sync transfer
  - add: split ISO log info into three tabs to conserve space
  - fix: packet length for V5 IQ data transfer
  - fix: remove legend from GPS block
17.08.2017 - v1.3.1.2213
  - fix: remove packet length detection code, to avoid spurious error messages
16.08.2017 - v1.3.1.2208
  - add: color schemes for remotes and drones
  - fix: linux build errors
15.08.2017 - v1.3.1.2200
  - fix: Saved main window positions were not restored correctly.
14.08.2017 - v1.3.1.2186
  - fix: linux build
13.08.2017 - v1.3.1.2184
  - add: more logging in case of matrix inversion failure in drone detection block
  - fix: drone double detection at start and end of spectrum
  - fix: duplicate config name in time range spectrum
12.08.2017 - v1.3.1.2178
  - fix: Identical names could cause problems while loading / saving values in Spectrum Time Range Trace
  - fix: mac build
  - fix: Memory leak
  - fix: replay of hidden file replay block
11.08.2017 - v1.3.1.2167
  - add: configurable IQ generator
  - fix: iso log crash when more than 16 segments are found
10.08.2017 - v1.3.1.2164
  - fix: improved geo map import
  - fix: lockup of drones on zero position
  - fix: reduce unicorn vomit in drone maps
  - fix: SUITE-208 crash when hovering over unconnected ISO log crosshair
09.08.2017 - v1.3.1.2160
  - add: Improved Mission loading time
  - fix: crash due to running out of vertex buffers with too many drone detections
  - fix: Multiple memory leaks
07.08.2017 - v1.3.1.2156
  - add: multi video channel drone detection
  - fix: hangup in drone detector polygon area creation
  - fix: superfluous error message when inserting file source
  - fix: texture error with antenna drone detection changes
06.08.2017 - v1.3.1.2151
  - add: debug system registers
05.08.2017 - v1.3.1.2149
  - add: statistics display to Spectran V5 block
04.08.2017 - v1.3.1.2147
  - add: JIRA SUITE-197 implement antenna index processing in category block
  - fix: JIRA SUITE 207 Marker Table and Frequency Profile layout
  - fix: JIRA SUITE-149 add error message to file reader block
  - fix: JIRA SUITE-206 width of marker displayed false
03.08.2017 - v1.3.1.2130
  - add: clear trails and trails duration config
  - add: cursor geomap measurement using CTRL + Left Mouse button
  - fix: build
02.08.2017 - v1.3.1.2123
  - add: customize profile/active channels to channel power
  - add: histogram to webgl sample
  - add: min/max/average to category bar chart
01.08.2017 - v1.3.1.2121
  - add: features query for http server
31.07.2017 - v1.3.1.2115
  - add: antenna sector tooltip in waterfall, including direction map previiew if local image available
  - add: highlight of antenna sector in waterfall
  - add: selecting antenna sector in waterfall
  - fix: waterfall orientation for iso log segment tooltips
30.07.2017 - v1.3.1.2112
  - add: SUITE-193 implemented custom channels in channel power block
29.07.2017 - v1.3.1.2110
  - add: geo location setting to drone command map
  - add: move time compression into channel power block
  - fix: crash with some time compression settings of channel power block and categorie charts
  - fix: JIRA SUITE-196 crash in AM/FM decode due to misaligned FFT Buffer
27.07.2017 - v1.3.1.2103
  - fix: memory leaks in file reader
  - fix: memory leaks in ISO Log Driver
27.07.2017 - v1.3.1.2100
  - add: drone detection zone and direction cones to map
  - fix: SUITE-178 Mac build: dropdown selection renders in wrong color
26.07.2017 - v1.3.1.2095
  - add: ribbon buttons for V5 mirror denoise
  - add: Tesla to power units
25.07.2017 - v1.3.1.2089
  - fix: crash with iso log simple map
  - fix: field strength
  - fix: opengl errors with spectrum views
25.07.2017 - v1.3.1.2083
  - add: more power units - field strength
  - fix: iso log simple map responds to azimuth
25.07.2017 - v1.3.1.2080
  - add: more power units
  - add: SUITE-152 Time domain triggered traces
  - add: SUITE-45 Simple ISO Log power map
22.07.2017 - v1.3.1.2075
  - add: simple ISO Log direction map
21.07.2017 - v1.3.1.2072
  - add: autoscroll for drone event table
  - fix: header background for tables
20.07.2017 - v1.3.1.2070
  - add: slider to drone history table
  - fix: v5 selection on the fly
19.07.2017 - v1.3.1.2068
  - add: auto phase detect for QAM signals in IQ histogram
  - fix: drag of section title widget lost mouse grab when detatching
18.07.2017 - v1.3.1.2064
  - add: implement load/save/copy of tile maps and custom images
  - fix: order of block shutdown
15.07.2017 - v1.3.1.2059
  - add: rotation and manual power control to IQ normalization block
14.07.2017 - v1.3.1.2057
  - add: import of IQ files into FileSource Block
12.07.2017 - v1.3.1.2054
  - add: IQ histogram block
  - fix: drone detection of video cross frequency hopps
11.07.2017 - v1.3.1.2051
  - add: demo drone detector
  - add: multi peaks for signal generator
10.07.2017 - v1.3.1.2047
  - fix: crash when starting on win7
10.07.2017 - v1.3.1.2045
  - add: 3d IQ scope
09.07.2017 - v1.3.1.2043
  - fix: block editor was missing in old missions
  - fix: height of frequency input control
08.07.2017 - v1.3.1.2040
  - fix: Linux build
  - fix: Previous mission files were not loaded correctly
  - fix: stop/start of IQ streaming in synchronous mode
07.07.2017 - v1.3.1.2036
  - add: experimental IQ streaming support
02.07.2017 - v1.3.1.2026
  - fix: crash when selecting Config Profile with Markers in Combo View
01.07.2017 - v1.3.1.2023
  - add: SetCursorShape and Qt cursor shapes
  - fix: relative paths in <head>
30.06.2017 - v1.3.1.2017
  - add: Added new item in RibbonControl: Frequency Profile
  - add: Arrows for Frequency Control
  - add: Removed AGC from RibbonControl
  - add: webgl based RTSA waterfall
28.06.2017 - v1.3.1.2012
  - add: drone pattern for 433 OCTO remote
  - add: IQ analog TV decoding
27.06.2017 - v1.3.1.2004
  - add: iq oscilloscope view
  - fix: frequency profile display
27.06.2017 - v1.3.1.1999
  - fix: drone detector crash w/o antenna
26.06.2017 - v1.3.1.1996
  - add: audio signal strength detector
  - add: icon for audio signal strength locator
  - add: pulse/pause to audio signal detector
  - fix: spectrum marker config
25.06.2017 - v1.3.1.1991
  - add: software IQ signal sweep generator
  - fix: build error
24.06.2017 - v1.3.1.1987
  - add: An error dialog will pop up just in case the application couldn't open a Aaronia GPS logging device
  - fix: Fixed a potential crash in GPS Block
23.06.2017 - v1.3.1.1984
  - add: antenna movement in map view
22.06.2017 - v1.3.1.1981
  - add: FrequencyEdit
  - add: generic antenna and drone trail display
  - add: RibbonControlBars can now set to stay visible
  - fix: Mac Build
  - fix: Memory leaks
  - fix: USB Device Manager - Added missing checkmarks
20.06.2017 - v1.3.1.1975
  - add: support for multiple RSA 306 devices
  - add: use generic map server for combined drone map view
20.06.2017 - v1.3.1.1973
  - add: generic geo map import config
  - add: generic geo map scale display
  - fix: drone tracking HTTP output
  - fix: read of antenna and stream names in rtsa files
  - fix: reading name of antenna from rtsa file
19.06.2017 - v1.3.1.1968
  - add: base geo map system for charts
18.06.2017 - v1.3.1.1966
  - add: drone tracking block
  - add: multi antenna support in map
15.06.2017 - v1.3.1.1962
  - add: Shortcut 'F11' to show or hide the BlockEditor
  - fix: Memory leaks
14.06.2017 - v1.3.1.1959
  - add: antenna selection to ISO log config
  - add: Auto-expand Trace and Marker groups
  - fix: Memory leaks
13.06.2017 - v1.3.1.1956
  - add: labels to traces in chart
  - add: Missing files
  - add: RibbonDock support
  - add: small text overlay for cursor measurements
  - add: toolbar to filesource
  - add: trace legend display inside chart
  - fix: generic 2.4 remove false positives
  - fix: Linux and Mac build
  - fix: phantom 4 video false positives
  - fix: scrubbing of histogram
  - fix: V5 shutdown crash with removed toolbard
12.06.2017 - v1.3.1.1945
  - add: missing build file
  - add: support for IQ streaming devices
07.06.2017 - v1.3.1.1938
  - fix: crash in multi spectral filter
06.06.2017 - v1.3.1.1935
  - add: cors header to post response
  - add: CORS to OPTIONS and POST
  - add: dummy response to POST body
  - add: generic tooltips for config items
  - fix: stale data received in POST request
05.06.2017 - v1.3.1.1929
  - add: third ISO log input to drone signal locator
04.06.2017 - v1.3.1.1927
  - add: azimuth/declination parameter for file reasder operator
02.06.2017 - v1.3.1.1924
  - add: train noise floor pattern to prevent misdetect of DJI4
01.06.2017 - v1.3.1.1921
  - fix: drone signal lost in drone views
  - fix: GPSBase.pri include path
01.06.2017 - v1.3.1.1917
  - fix: drone location detection with no map server
01.06.2017 - v1.3.1.1915
  - add: HTTP server control command
31.05.2017 - v1.3.1.1913
  - add: more input formats for GPS coordinates
  - add: time/position/power modification for file reader block
  - fix: live streaming on signal locator block
30.05.2017 - v1.3.1.1910
  - add: drone position triangulation block
  - add: position to drone tracking
  - add: some operator icons
30.05.2017 - v1.3.1.1906
  - add: make binary operator responsive
  - fix: FUTABA 7H Detector
29.05.2017 - v1.3.1.1903
  - add: low pass and high pass filter to unary operator
  - add: missing futaba remotes
  - fix: sloppy response of 3D waterfall when selecting smoothing
29.05.2017 - v1.3.1.1900
  - fix: app blocked when GPS started with not connected device
  - fix: build error
  - fix: RTBW detection on Start Button for delayed enabled V5
28.05.2017 - v1.3.1.1896
  - add: dragging of antenna to GPS block
  - add: GPS Logger Block
  - add: multi spectral filter
  - add: test support for IQ samples
  - fix: 88MHz RTBW limit now checked again on start
  - fix: crash of drone detection with stitched wide spectrum
  - fix: mac and linux build
  - fix: memory leaks
  - fix: signal slot problems in GPSLogger
23.05.2017 - v1.3.1.1883
  - add: resampling operator block and temporal filtering
21.05.2017 - v1.3.1.1880
  - fix: crash in hoppingsessions due to tooltips
21.05.2017 - v1.3.1.1878
  - add: operator mode to binary operator block
  - add: spectrum segment operator to unary arithmetic block
20.05.2017 - v1.3.1.1875
  - add: prototype for binary arithmetic operator block
  - add: prototype for multi synchronized waterfall chart block
  - add: unary arithmetic operator block
17.05.2017 - v1.3.1.1871
  - fix: simplemap memory leak
  - fix: stream write of wide spectra
17.05.2017 - v1.3.1.1869
  - add: FUTABA Remote Detection
  - add: geo location to HF path
  - add: GPS support for HF Path and ISO Log Blocks
16.05.2017 - v1.3.1.1864
  - add: map support for drone signal locator
  - fix: crash in two level y axis on category histogram
  - fix: RTSA-Suite for Mac, App-Icon should not appear in the taskbar
14.05.2017 - v1.3.1.1860
  - add: smooth transition for stitcher block
13.05.2017 - v1.3.1.1857
  - add: configuration options for stitcher block
  - fix: Mac build
12.05.2017 - v1.3.1.1851
  - add: WaitCursor when adding new Blocks
  - fix: assert in grid when empty
  - fix: crash in timeshift block, when sample size changes
  - fix: crashes in stitcher when source stop/start
12.05.2017 - v1.3.1.1847
  - add: reading calibration date from V5
  - add: spectrum stitcher block
11.05.2017 - v1.3.1.1839
  - add: spectrum stitcher (test)
  - fix: assert in HF part view
  - fix: crash in AM/FM Decoder on nvidia cards
11.05.2017 - v1.3.1.1832
  - add: fileRead command for V5 eeprom
10.05.2017 - v1.3.1.1827
  - add: Added new Factory Missions. UWB Lightbridge, DualReceiver, Hopping
09.05.2017 - v1.3.1.1821
  - fix: aroundspacking textures in drone detector
09.05.2017 - v1.3.1.1819
  - fix: drone texture display
  - fix: drone video detector did not recover after slience
  - fix: remote RTBW device options
09.05.2017 - v1.3.1.1815
  - add: dual input channel drone detection
07.05.2017 - v1.3.1.1807
  - add: prepare merge block for multiple independent and overlapping source streams
  - fix: display of reference ranges in spectrum view
06.05.2017 - v1.3.1.1803
  - add: All docks can now be hidden or shown via their menu item. See menu View / Docks
  - fix: crash of sectore waterfall
  - fix: high dpi scaling for Mac OS
  - fix: mac HiDPI scaling for mouse input
  - fix: Memory leaks
  - fix: mouse clipping in Mac HiDPI
  - fix: spectrum lost its realtime display
05.05.2017 - v1.3.1.1791
  - fix: drone pattern detector rendering
  - fix: various opengl core profile issues
04.05.2017 - v1.3.1.1787
  - fix: bind VAO to make NVIDIA driver happy
  - fix: GL errors in HF path rendering
  - fix: glsl fragment type cast int to bool
  - fix: remove remaining glBegin
  - fix: rtbw calibration block
  - fix: update fragment shaders to 330
  - fix: update shaders to 330
04.05.2017 - v1.3.1.1778
  - add: container chart item
  - fix: 3D Markers
  - fix: AM/FM Decoder Display
  - fix: drone map display
29.04.2017 - v1.3.1.1769
  - add: Double click on Blocks adds them to the graph
  - add: mssing drone picture
  - fix: 'Hidden' dropped Blocks will be deleted and not saved into the Mission file
  - Fix: Get Nearest RTBW caused crash in V5 Bloock select Profile
  - fix: playback position and scrubbing with file reader block
  - fix: Removed Dump Window
28.04.2017 - v1.3.1.1763
  - add: PAL + NTSC Video Detector
  - fix: windows build
28.04.2017 - v1.3.1.1760
  - add: initial Mac OS-X build
  - add: moved drone trainings xml
  - add: New profiles FPV Analog Video
  - add: Styles can now be selected directly from the menu. See Extras / Styles
  - fix: max build
  - fix: max build
  - fix: max build
  - fix: Possible crash in the Block Editor
  - fix: uninitialized variables
27.04.2017 - v1.3.1.1751
  - Add: RSA Block
  - add: sanity checks for small bin sizes in drone detectors
  - fix: audio monitoring block clicking noises and blocking
  - fix: crash with small bin sizes caused by manual packet end searching
  - fix: loops for file reader block
26.04.2017 - v1.3.1.1744
  - add: HTTP support for structured streams
  - add: readme to keys folder
  - fix: amfm decoder
  - Fix: Linux Build
  - fix: Memory leaks
  - fix: Memory Leaks
  - Fix: Memory leaks
  - fix: Memory leaks
25.04.2017 - v1.3.1.1735
  - add: get sample HTTP request
  - add: structured DSP data streams
  - fix: V5 device selection
24.04.2017 - v1.3.1.1731
  - add: improve cursor menu
  - add: keyfile protection for drone blocks
23.04.2017 - v1.3.1.1728
  - fix: remove memory leaks
22.04.2017 - v1.3.1.1726
  - add: support for memory leak debugging
  - fix: build
  - fix: frequency limit for V5 versions
  - fix: more memory leak fixes
  - fix: removed various memory leaks
21.04.2017 - v1.3.1.1719
  - add: generic remote detector
19.04.2017 - v1.3.1.1711
  - add: Factory Reset button got an icon
  - add: Tooltips for Settings Reset Buttons
  - fix: Block 'Default User Settings' couldn't be set
18.04.2017 - v1.3.1.1707
  - add: bearing and altitude to icons on map
  - add: degree texts on radar grid
17.04.2017 - v1.3.1.1704
  - fix: initial energy spike in drone energy
14.04.2017 - v1.3.1.1698
  - fix: Using button 'Reset to Factory Settings' in a single block caused a mission-wide value reset in all blocks
14.04.2017 - v1.3.1.1696
  - fix: Added missing v5rtbwdata.xml to calibration/rtbw
  - fix: linux build
  - fix: rename checksums file to fix linux build
13.04.2017 - v1.3.1.1679
  - add: block license key protection
  - add: common control structure for drone detections
  - add: kalman filter to library
  - add: kalman filter to smooth drone direction display
13.04.2017 - v1.3.1.1676
  - Add: Grab GL table scrollbar
  - add: New menu item: File / Open Mission Folder
  - add: New menu items: File / Open Recent Missions
11.04.2017 - v1.3.1.1659
  - fix: crash in drone detection
11.04.2017 - v1.3.1.1657
  - fix: scrubbing with ISO log files
  - fix: various side view mirror problems
11.04.2017 - v1.3.1.1655
  - add: block for multi drone detection triangulation
  - add: drone display persistence slider
  - Add: history table, fix distance measurement, change antenna look
10.04.2017 - v1.3.1.1651
  - add: support for iso log step sizes > 1
07.04.2017 - v1.3.1.1643
  - add: requesting opengl version 3.2 migth fix problems with some shaders
  - add: support for multi stream HTTP connection (e.g. drone bearing and energy)
07.04.2017 - v1.3.1.1640
  - add: connection parameters to HTTP connection
  - add: rate buffer to http streaming
  - fix: clear/write in spectrum display
06.04.2017 - v1.3.1.1635
  - fix: dynamic sizing of frequency profile
04.04.2017 - v1.3.1.1632
  - add: import menu item for reference traces
  - add: sweep mode to spectrum sweep block
  - fix: modified flag was set without change on markers
  - fix: waterfall 3D surface mode
04.04.2017 - v1.3.1.1629
  - add: first prototype for HTTP based streaming
03.04.2017 - v1.3.1.1627
  - add: copy trace to reference
  - Fix: Antenna out of map arrow
  - fix: export to EXCEL semicolon CSV format
  - fix: reference traces
03.04.2017 - v1.3.1.1624
  - add: accept frequency profile from downstream blocks
  - add: bright style
02.04.2017 - v1.3.1.1621
  - add: confidence range display in radar scope of drone detector
  - add: info and export option to RTSAFileTool
  - add: two level cursor for category display
  - fix: stream end packet when stopping V5
01.04.2017 - v1.3.1.1618
  - add: amplifier settings in spectrum sweep
  - add: cursor config and menu
  - Fix: Improve map accuracy, prepare map measurements
31.03.2017 - v1.3.1.1609
  - fix: reset modified flags when saving mission
30.03.2017 - v1.3.1.1607
  - Add: User dialog when opening a new session only if the actual mission was modified
  - fix: check modified was not reset
  - fix: default was always applied to loaded sessions
30.03.2017 - v1.3.1.1604
  - add: Updated Missions
  - fix: Config item changed event wasn't delivered correctly from some blocks
  - fix: Factory settings were reset to default if a block-specific user default file was found
30.03.2017 - v1.3.1.1601
  - add: modified and default to config items
  - add: New factory mission
  - fix: compiler problem in RTSA-Server
  - fix: Unimplemented style for DockWidget caused a problem when floating a dock
29.03.2017 - v1.3.1.1593
  - Add: Mission for drone detection DDS1
  - add: New menu item 'Open Factory Missions'. Allows the user to open the shipped missions.
  - fix: crash on closing a mission with running iso log on windows
  - fix: drone detector waterfall
  - Fix: Every opened mission by the user was saved during program exit
  - fix: Linux build
28.03.2017 - v1.3.1.1583
  - add: comboview block
  - add: spliiter items for RTSA view layouts
  - fix: accumulation of invalid dock widget layout states
  - fix: broke compiler
  - fix: placement of labels in multiline slider
27.03.2017 - v1.3.1.1577
  - add: save as image for all data blocks
26.03.2017 - v1.3.1.1574
  - fix: initial visibility state on widgets
  - fix: linux build
25.03.2017 - v1.3.1.1571
  - add: generic DJI 3+4 Detector
25.03.2017 - v1.3.1.1569
  - add: axis position labels to cursor
  - add: crash dumps to debug log
23.03.2017 - v1.3.1.1566
  - add: neural network for drone video detection
  - add: New drone profiles
  - add: New translation for Spanish
  - fix: Corrected translation file for French
23.03.2017 - v1.3.1.1563
  - add: New calibration files for cables
  - add: New profiles for Drones
  - fix: propagate sub stream antenna changes through node detector blocks
22.03.2017 - v1.3.1.1557
  - Add: Mouse map grab, add multiple tiledir support
  - Add: Picture Import & Fix: map grab foxus
  - fix: artefacts in sample/hold when switching time correction
21.03.2017 - v1.3.1.1549
  - fix: property grid sub section layout
  - fix: revert to 16bit float framebuffer due to NVIDIA crashes with fixed point framebuffer
21.03.2017 - v1.3.1.1543
  - add: another mavic pro video pattern
21.03.2017 - v1.3.1.1538
  - add: new sample/hold mode to spectrum display
  - fix: Installer wasn't installing the gdata
20.03.2017 - v1.3.1.1535
  - add: Added new translations for arabic and french
20.03.2017 - v1.3.1.1531
  - add: two level axis
  - add: type detecting axis
19.03.2017 - v1.3.1.1529
  - add: new pattern for DJI3 ADV remote
  - add: prepare per block performance counter
  - add: two level vertical axsis
  - fix: remove debug information
18.03.2017 - v1.3.1.1523
  - fix: build errors
  - fix: missing changes
17.03.2017 - v1.3.1.1518
  - add: keyboard zoom/pan in charts
  - add: workaround for packet fifo out of synch error
17.03.2017 - v1.3.1.1516
  - add: multiple named DSP connections on RTSA connections
  - add: option to revert time orientation in waterfall
  - add: shared drone database to rtsa block graph
  - fix: Compiler problem under Linux
  - fix: file reader not scaling horizontaly
16.03.2017 - v1.3.1.1505
  - add: centered option to color settings
  - Add: load Map from Map Picture File
  - add: option to show/hide antenna index in waterfall
  - add: progress dialog to file source operator
15.03.2017 - v1.3.1.1496
  - Fix: IsoLOG initialization
15.03.2017 - v1.3.1.1492
  - add: hysteresis and animation to drone detector
14.03.2017 - v1.3.1.1490
  - add: Updated functionality of User-Defaults buttons
  - fix: iso-log antenna altitude
14.03.2017 - v1.3.1.1484
  - fix: propagation of antenna changes in conversion block
14.03.2017 - v1.3.1.1481
  - add: selection of frequency channel in drone video pattern detector
  - fix: set Substream antenna ID's
14.03.2017 - v1.3.1.1477
  - fix: Modified the blue style, updated the other styles to the new format
13.03.2017 - v1.3.1.1472
  - add: save/load antenna ID with rtsa file
13.03.2017 - v1.3.1.1465
  - fix: crash in maptile server
  - fix: drone overdetection due to un-initialized variable
13.03.2017 - v1.3.1.1461
  - fix: crash in time compression block
  - fix: zero signal drone detection
13.03.2017 - v1.3.1.1457
  - fix: problems/crashes when dropping packets at graph inbound block
12.03.2017 - v1.3.1.1450
  - add: export markers and peaks using XML
  - fix: crash with markers
11.03.2017 - v1.3.1.1446
  - add: drone video channel detection
  - fix: remove dependency on detection stream for energy display
  - Fix: send graphmessage in different thread
10.03.2017 - v1.3.1.1435
  - add: Added new styles
  - fix: Fixed layout for 'Select Profile Dialog '
  - fix: Fixed layout for 'USB Devive Dialog'
09.03.2017 - v1.3.1.1431
  - add: more drone images and patterns
09.03.2017 - v1.3.1.1429
  - fix: crash with turbo mode
08.03.2017 - v1.3.1.1426
  - add: first prototype of drone video channel analyzer
  - fix: linux build
07.03.2017 - v1.3.1.1422
  - add: New FlowSheet RTSA_QSS_Generator
  - add: new translations for Chinese and Spanish
  - fix: crash when adding drone pattern detector cause by broken localisation
  - fix: name of category subtype
05.03.2017 - v1.3.1.1413
  - add: category timeline block
  - fix: linux build
04.03.2017 - v1.3.1.1410
  - fix: initial packet duration for various RTBW and FFT sizes
03.03.2017 - v1.3.1.1407
  - add: block images
  - add: block to convert spectra to channel power
  - add: category based histogram
  - add: friend or foe selection for drone detector
02.03.2017 - v1.3.1.1404
  - fix: Linux compiler problem
02.03.2017 - v1.3.1.1400
  - add: The language can now be changed. The program will restart automatically
01.03.2017 - v1.3.1.1390
  - add: App Languages can now be switched from the menu
28.02.2017 - v1.3.1.1376
  - add: generic polygons to spectrum condition block
  - fix: build error
  - fix: build error
  - fix: crash when removing area from spectrum condition
27.02.2017 - v1.3.1.1371
  - add: hold to condition block
  - add: trigger modes and min/max samples to trigger block
26.02.2017 - v1.3.1.1368
  - add: more control over power quad in condition operator
  - add: trigger and condition blocks
  - fix: multi regions in condition and trigger block
24.02.2017 - v1.3.1.1363
  - add: OnDisconnect to RTSA Blocks
23.02.2017 - v1.3.1.1361
  - fix: correction path to dBm range calculation in conversion block
  - Fix: Only One Connection to a RF output is reasonable
  - Fix: set correction path
22.02.2017 - v1.3.1.1355
  - fix: avoid register reads for stats when V5 is not open
  - Fix: Forward correction Data trough RF Switch
  - fix: limit inputs to one connection
  - Fix: RF Path naming
  - fix: temporal histogram snowflakes
21.02.2017 - v1.3.1.1350
  - add: Connections in the BlockEditor can now re-connected to another block just by using the mouse
  - add: Improved object selection in the BlockEditor
  - add: integration of HF path and V5 block
20.02.2017 - v1.3.1.1342
  - fix: memory issues with average block
19.02.2017 - v1.3.1.1338
  - add: rtbw selection for sweep block
  - add: support for sweeping in drone detector
  - fix: Build errors in windows build
  - fix: drawing profiles with subprofiles
18.02.2017 - v1.3.1.1334
  - fix: connection rendering in graph
  - fix: DSP CPU usage display
17.02.2017 - v1.3.1.1329
  - add: Block connectors and connections are now colored according to their type
  - add: Blocks in GraphEditor now uses the Block Image for better identification
  - add: common management Objec for all RTSABlock
  - add: New added blocks will be selected and centered in the block graph. The corresponding dock will be activated
  - Add: RF SP4T picture
  - add: some block images
  - add: start/stop control in sweep block now by spectran block
  - add: type system for connection types
  - fix: Better layout of the connection labels
  - Fix: Change to one FrequencyProfileModel
  - fix: chart layout error
  - fix: crash when adding file writer
  - fix: Double Click on a Block didn't select it
  - fix: multi sweep streaming with changing FFT size
16.02.2017 - v1.3.1.1319
  - Add:  minicircuits device linux udev rule
  - add: chain output to spectrum sweep allows multiple sweeps
  - add: Labels for connectors in BlockEditor
  - add: new drone definitions and images
  - fix: drone images
  - fix: memory leaks and late memory returns during streaming
  - fix: value range problems with missing or invalid rtbw correction file
  - fix: waterfall 3D with wide data source
  - fix: zero in waterfall time compression
15.02.2017 - v1.3.1.1312
  - add: automatic noise floor based on rtbw metrics
  - add: drone pictures
  - Add: Minicirciuts RF SP4T Switch block
  - fix: cannot show graphe editor anymore due to out of sync of config item state and view state
  - fix: crash in sweep block, when manually starting V5 block early
  - fix: power integration for inactive sweep areas
14.02.2017 - v1.3.1.1301
  - add: experimentel dancing devil reduction using mirror
  - add: first experimental implementation of spectrum sweep
  - fix: crash in histogram operator
12.02.2017 - v1.3.1.1293
  - add: additional histogram options
10.02.2017 - v1.3.1.1286
  - add: Integrated the default mission
10.02.2017 - v1.3.1.1280
  - add: The app's mainwindow will be maximized if the app is running the first time
  - fix: config profile problems with loading default profiles
10.02.2017 - v1.3.1.1271
  - add: First version of the RTSA-Suite portable installer
08.02.2017 - v1.3.1.1261
  - fix: channel profile display overlapp
08.02.2017 - v1.3.1.1256
  - add: chart for HF path
08.02.2017 - v1.3.1.1253
  - fix: 'Profile Select' dialog now properly resizes its controls
08.02.2017 - v1.3.1.1248
  - Add: Chart view to HFPath block
07.02.2017 - v1.3.1.1245
  - add: channel profile charts in spectrum view
  - add: New menu items in Extras: Data/Open Datafolder Global, User, Documents
  - fix: Fixed build for Mac OS
  - Fix: open in Folder (Linux)
05.02.2017 - v1.3.1.1231
  - add: debug paths.xml to factory data
  - fix: crashes in drone pattern detector
04.02.2017 - v1.3.1.1226
  - Fix: New installer now uses the new paths
  - Fix: Program paths are now consistent
03.02.2017 - v1.3.1.1220
  - add: BlockGraphEditor now supports multiple input / outputs
  - Fix: Data Copy to Build  Folder
  - fix: xcopy in windows build
03.02.2017 - v1.3.1.1205
  - Add: Simple Map Block
02.02.2017 - v1.3.1.1203
  - add: drone pattern detector
  - Add: IsoLOG Block, remove IsoLOG part from V5 Block
  - Add: Select color with alpha channel flag in configitems, save color with alpha channel
  - Fix: Color edit Chancel button cause black color
  - fix: linux build
29.01.2017 - v1.3.1.1184
  - add: document for program folder structure
  - add: dynamic traces
  - add: traces to histogram view
27.01.2017 - v1.3.1.1179
  - Add: Probe to HF Path correction
  - Fix: frequency edit initialization and resources
  - Fix: IsoLOG address in field after autoconnect
25.01.2017 - v1.3.1.1169
  - add: frequency profiles to all 2D charts
  - fix: linux build
24.01.2017 - v1.3.1.1164
  - Fix: FPS status
  - Fix: Load Stylesheet, Add: Save used stylesheet Ref: Deaktivate old/unused config file
23.01.2017 - v1.3.1.1161
  - add: prepare setting FFT window shift factor
  - fix: linux build
  - fix: tooltip display for sliders with update on release semantics
21.01.2017 - v1.3.1.1146
  - fix: build of application configuratrion build
19.01.2017 - v1.3.1.1133
  - Add: linux: New folder hierarchy
18.01.2017 - v1.3.1.1127
  - add: New 'Reset to User-Default' functionality in configuration area of the RTSA blocks
  - add: New folder structure for factory and user-data.
  - Fix: Linux User Config File Destination
17.01.2017 - v1.3.1.1124
  - add: numeric input for slider
  - fix: double numeric input fields for floats
15.01.2017 - v1.3.1.1120
  - add: experimental board temperature status display
  - add: more drones for detector
  - fix: signal conversion when lacking rtbw config
14.01.2017 - v1.3.1.1114
  - add: antenna information to stream and rtsa files
  - add: location and bearing information to antenna
  - add: map view to drone display based on open streat map maps
  - fix: remove dead status string
09.01.2017 - v1.3.1.1076
  - add: multi pattern drone detection
05.01.2017 - v1.3.1.1066
  - fix: drone detection overflow crash
05.01.2017 - v1.3.1.1062
  - add: line interpolation mode for specttrum view
  - fix: correct frequency axis in spectrum view
04.01.2017 - v1.3.1.1049
  - add: directional power in drone detection
  - add: prepare streaming read of status registers
  - fix: more mutex control in V5
29.12.2016 - v1.3.1.1042
  - fix: saving time header in CSV files
28.12.2016 - v1.3.1.1040
  - add: activate synchronous mode
26.12.2016 - v1.3.1.1036
  - add: complete rtbw correction file
24.12.2016 - v1.3.1.1033
  - add: rtbw callibration block and v5conversion code
23.12.2016 - v1.3.1.1031
  - Fix: Qt lib path
  - Fix: V5 default Option
21.12.2016 - v1.3.1.1019
  - add: polynomial sample value correction based on measured curves
20.12.2016 - v1.3.1.1012
  - add: channel utilization waterfall display
  - add: semicolon separated files for german excel
18.12.2016 - v1.3.1.1007
  - add: export of spectra data to xml file
  - fix: sideview showing old data
17.12.2016 - v1.3.1.1004
  - add: auto color modes
  - add: data export for filesource and fileshift
  - add: export of trace data in spectrum view
  - add: recording and playback of isolog data
  - add: selecting nvidia GPU in dual GPU system on laptops
  - fix: crash when opening drone view
  - fix: shaders for intel GPUs
16.12.2016 - v1.3.1.1000
  - Add: Drone Simu fly a curve
  - fix: crash when opening drone display
  - fix: scrubbing in time shift
15.12.2016 - v1.3.1.997
  - add: absolute time axis labels
  - add: Missing image file
  - add: outline trace to spectrum view
  - fix: broken checkin
15.12.2016 - v1.3.1.993
  - pub: Added changed config sequence for BlockFactories
  - pub: Updated drone files
  - pub: Updated installer
  - pub: Updated profiles
14.12.2016 - v1.3.1.988
  - add: live update from waterfall and file reader
  - fix: race condition in lock/unlock of streaming blocks
13.12.2016 - v1.3.1.981
  - fix: Updated Profiles
12.12.2016 - v1.3.1.977
  - fix: build
11.12.2016 - v1.3.1.974
  - add: flexible preview creation for rtsa files
  - add: lossy data compression for rtsa files
  - add: waterfall view for compressed file preview
  - fix: small frequency shift when changing fft size
10.12.2016 - v1.3.1.972
  - Fix: IsVisible setting of ItemPropertyWidget
  - fix: Updated Drones
09.12.2016 - v1.3.1.967
  - add: channel ranges to frequency profile display
  - Add: Check IsoLOG Output Amplifier Option
  - add: display of frequency profiles in waterfall
  - fix: show colors for channel config
08.12.2016 - v1.3.1.961
  - add: first shot on new file format embedded previews
  - fix: vertical layout in preview
06.12.2016 - v1.3.1.946
  - add: asynch streaming to and from files using file reader and writer blocks
  - add: new file format for all rtsa stream types
04.12.2016 - v1.3.1.941
  - add: add/edit/remov/save channel setting in AM/FM filter
  - add: dynamic filter for audio playback
03.12.2016 - v1.3.1.939
  - add: marker for histogram
  - add: new Drone detectors
  - Fix: Control Toolbar Space
02.12.2016 - v1.3.1.934
  - add: auto detect button to pulsed waterfall
  - add: dynamic time compression mode for waterfall and 3D waterfall, that adapts to incomming immediate segments (scrubbing)
  - fix: prevent redraw of view widgets while shutting down mission
30.11.2016 - v1.3.1.920
  - fix: Pulsed Waterfall for Scrubbing
  - fix: Reference counting of spectran block
29.11.2016 - v1.3.1.914
  - add: window function selection in spectral block
  - fix: graph layouter buld errors
  - fix: invalid usage of "Release" for destructor work
  - fix: scrubbing in spectral block
  - fix: various shutdown problems in block editor and spectran block
28.11.2016 - v1.3.1.908
  - fix: timing issues with sprectrum view and scrubbing
27.11.2016 - v1.3.1.906
  - add: configurable overlapp for IQ import
  - fix: display of FFT sizes of > 2048
26.11.2016 - v1.3.1.904
  - add: fast update of downstream views when moving range in filesoure in "steady" mode
  - fix: histogram border invalid data
  - fix: memory free issue in file source
  - fix: reading of firmware version
25.11.2016 - v1.3.1.898
  - Add: Ask for V5 FW version
  - add: checksum and resynch to V5 driver
  - add: experimental "image enhance" for waterfall behind file source
  - add: import of iq.tar files
  - fix: color histogram for log scale percentage
  - fix: deleting marker that was loaded
  - fix: inverse colored range in spectrum display
23.11.2016 - v1.3.1.889
  - add: IQ file as Spectras Import
  - add: sector waterfall block
  - fix: resize problem after adding markers
22.11.2016 - v1.3.1.884
  - add: multiple marker sets
  - add: use real logscale and %/dB for histogram
17.11.2016 - v1.13.0.8
  - Fix: platform compatibility, change  ~0UL to ~0U
  - fix: typing error dB0┬ÁV
17.11.2016 - v1.3.1.863
  - add: merge mode for spectrum realtime view
  - add: structure rebuild of config items
16.11.2016 - v1.3.1.860
  - Fix: load calibration data, first open
16.11.2016 - v1.3.1.850
  - add: indenting for config items
  - add: simple noise floor equalization to v5 conversion block
15.11.2016 - v1.3.1.843
  - add: center at cursor button
  - add: cross block cursor messages
  - fix: locale numbers in property widgets
14.11.2016 - v1.3.1.835
  - add: line histogram to spectrum view
13.11.2016 - v1.3.1.832
  - add: legend to charts
  - add: Watermark to charts
11.11.2016 - v1.3.1.826
  - fix: lockup in time to ratio matching
11.11.2016 - v1.3.1.823
  - fix: placement of peacks table in multi spectral view
11.11.2016 - v1.3.1.821
  - add: 3D Markers
  - add: new drone file with DJI4
  - add: selectable power unit for charts
10.11.2016 - v1.3.1.814
  - add: peaks detection for spectrum, histogram and multi spectral
  - Bugfix: init Drone
09.11.2016 - v1.3.1.811
  - Bug Fix: add Antenna defaults
08.11.2016 - v1.3.1.808
  - fix: display of range value in range cursor
08.11.2016 - v1.3.1.806
  - add: additional degree of freedom for color settings
07.11.2016 - v1.3.1.803
  - fix: color wall in multi spectral 3D
  - fix: labeling of 3D cursors
06.11.2016 - v1.3.1.800
  - add: delta text for range 3D slider
06.11.2016 - v1.3.1.798
  - add: audio warnings to drone detection
  - add: range cursors for 3D charts
03.11.2016 - v1.3.1.779
  - Bugfix: Windows build
03.11.2016 - v1.3.1.771
  - add: flag check for V5 open
  - Bugfix: V5 driver Multi Device Support
  - Bugfix: Windows build
  - fix: stack overflow with new multi device detection
02.11.2016 - v1.3.1.759
  - add: interpolate switch to histogram view
  - fix: infinite mode in histogram
01.11.2016 - v1.3.1.754
  - fix: contiguous histogram mode
01.11.2016 - v1.3.1.752
  - add: line mode for histogram
31.10.2016 - v1.3.1.745
  - add: time display to measurements in multi spectral
30.10.2016 - v1.3.1.743
  - add: reference line in spectrum display
29.10.2016 - v1.3.1.740
  - add: 3d axis configuration
  - add: alert text and multiple drone images to drone detector
  - add: config items for axis and grid layout
  - add: configuration of background color in charts
  - add: noise floor clipping configuration
28.10.2016 - v1.3.1.734
  - add: auto rotate for 3D charts
  - add: main and view second level config items for chart blocks
27.10.2016 - v1.3.1.727
  - add: drone image on detection
  - add: pan in charts using middle mouse button
  - fix: crash when selecting in unusged spectrum view
26.10.2016 - v1.3.1.714
  - add: 3D pulsed waterfall
  - add: frequency display for time distance in XY cursor tooltip
  - add: side views to 3D Waterfall and 3D Histogram
  - fix: cursor in multispectral
25.10.2016 - v1.3.1.706
  - add: labels to 3D cursors
  - add: more drone detection
  - Fix: change Antenna Size
24.10.2016 - v1.3.1.702
  - add: jitter support for pulsed waterfall
  - add: more drones at 2.4GHz
23.10.2016 - v1.3.1.699
  - add: value display for xycursor in spectrum display
22.10.2016 - v1.3.1.697
  - add: color config setting
  - add: spectrum display
21.10.2016 - v1.3.1.692
  - add: priority to grid scaling for multiview diagrams
  - fix: slider in stylesheet
18.10.2016 - v1.3.1.687
  - add: export for more views
  - add: export of image of various views
17.10.2016 - v1.3.1.680
  - add: advanced color flow control using histogram
  - add: CSV export for 2D waterfall
  - fix: build issues
16.10.2016 - v1.3.1.669
  - Bugfix: Antenna intersection update after antenna sector change
15.10.2016 - v1.3.1.667
  - Bugfix: Antenna intersection update after antenna rotation
15.10.2016 - v1.3.1.665
  - Bugfix: set Z-value to 2(drawing order) of antenna intersection
14.10.2016 - v1.3.1.657
  - add: save to timeshift block
  - BugFix: Set port of IsoLOG Antenna element
  - BugFix: Stop IsoLoOG Rotation
  - fix: flaky display in pulsed waterfall
  - fix: memory leak in drone detector
12.10.2016 - v1.3.1.645
  - add: DJI2 Professional detection at 2.4GHz
11.10.2016 - v1.3.1.632
  - add: icons for window buttons
  - add: mouse cursor
  - add: pause button
  - add: pulsed waterfall prototype
  - add: timeshift block
  - fix: pause block stream restart problems
09.10.2016 - v1.3.1.627
  - add: drone detector block
  - fix: mouse grab in charts
  - fix: move selection in scrolled area
  - fix: save 3D settings
  - fix: tick moved in wrong y direction
08.10.2016 - v1.3.1.624
  - fix: power band detector signed/unsigned bounds
03.10.2016 - v1.3.1.614
  - fix: base for chart axis
30.09.2016 - v1.3.1.592
  - Fix: Linux Build
29.09.2016 - v1.3.1.588
  - add: band energy detector
  - add: drag and resize of selection area in XY cursor
  - fix: cleanup 2D histogram shader
  - fix: waterfall shader code
29.09.2016 - v1.3.1.576
  - Add: Put map into window
29.09.2016 - v1.3.1.571
  - add: color control for charts
  - add: configuration of bus transfer mode
  - fix: file export nanoseconds
  - fix: file source cursor
28.09.2016 - v1.3.1.563
  - add: value cursor support for x-span cursor
  - fix: enable live add of rtsa streaming blocks
27.09.2016 - v1.3.1.557
  - add: color control to 2D charts
  - add: continuous time looping in recorded measurement
  - add: measurement to histogram and waterfall XY cursor
  - add: signal detection to waterfall
  - fix: display of multi spectral 3D
26.09.2016 - v1.3.1.551
  - Compatibility Fix: OpenGL Depth Buffersize
25.09.2016 - v1.3.1.546
  - add: blue border around undocked charts
  - fix: axis half pixel precision
  - fix: log scale in slider widgets
23.09.2016 - v1.3.1.538
  - add: first shot on voice filter block
  - add: replay range and indicator to file source block
  - fix: opengl performance problems due to removal of main window swap intervall setting
22.09.2016 - v1.3.1.533
  - add: audio recorder replay support
  - add: fake audio stream detection for recorder testing
  - Fix: Jira Suite-116
21.09.2016 - v1.3.1.529
  - add: display of captured streams in amfm decoder
  - add: initial experiment on audio recording block
  - fix: reconnect of blocks on reload
21.09.2016 - v1.13.0.6
  - add: basic multi AM/FM decode
20.09.2016 - v1.3.1.512
  - fix: texture text coordinates
20.09.2016 - v1.3.1.508
  - add: file read for filesource block
20.09.2016 - v1.3.1.505
  - add: frequency display in amfm demod chart
  - add: support for multiple streamd in rtsa chart
19.09.2016 - v1.3.1.499
  - add: file replay and amfm decoder
  - add: support for font caching in textures
  - fix: logscale flag spelling
19.09.2016 - v1.13.0.5
  - add: zoom and pan for 3D charts
  - fix: re-added 3d histogram
  - fix: style init for rtsa chart widgets
18.09.2016 - v1.3.1.484
  - add: 3D histogram
  - add: checkboxes for 3D cursors
  - add: synchronous mode (defunct)
17.09.2016 - v1.3.1.478
  - add: coordinates for 3D charts
  - add: flags for config items
  - fix: graph stop problem when waterfall hidden
15.09.2016 - v1.3.1.467
  - add: 3D waterfall to multiview
14.09.2016 - v1.3.1.460
  - add: basic 3D widget to multiview
  - add: configuration of sideshow charts for multi view
  - add: zoom and pan to multiview graphs using axis for manipulation
  - fix: limit waterfall texture size based on GL limits
13.09.2016 - v1.3.1.450
  - fix: time calculation in compress block
12.09.2016 - v1.3.1.445
  - add: isolog max detection
  - add: sideshow views for waterfall and histogram
11.09.2016 - v1.3.1.440
  - add: histogram block for multiview
09.09.2016 - v1.3.1.432
  - fix: 14 sample FFT size
  - fix: time offset for tcp receiver block
08.09.2016 - v1.3.1.425
  - add: grid layout for multiview widgets
  - fix: histogram problems with 14 sample FFT
07.09.2016 - v1.3.1.412
  - add: 14 sample FFT
06.09.2016 - v1.3.1.401
  - fix: SUITE 101 broken profiles
06.09.2016 - v1.3.1.397
  - Fix: AppDataPath on Windows. Missing Company Name
  - fix: SUITE-76 547kHz wrong frequency
02.09.2016 - v1.3.1.382
  - add: more multiview
  - add: start time and end time in double
  - add: time mockup for waterfall
  - bug fix: Buffer overflow
  - fix: build
01.09.2016 - v1.3.1.360
  - add: generic config items
  - add: more config items for dsp stream blocks
  - fix: crash when removing block from dspstream
  - fix: memory free delay when switching fft size
  - fix: packet overflow in compression block
  - fix: RTSA Blocks build dependencies
  - fix: SUITE-92 update of chart setting delayed by waterfall
31.08.2016 - v1.3.1.351
  - add: 28 and 56 samples per FTT modes
  - fix: adapt waterfall width for 28 samples per FFT
30.08.2016 - v1.3.1.343
  - add: AM Voice detector block
  - add: auto rotate demo mode for 3D waterfall
  - add: maximum number of traces for realtime view
  - add: SSE memory allocation to streaming graph
  - add: stream state validation for debug build
  - add: upscaling for short time windows in waterfall
  - fix: crash when importing during streaming
  - fix: crash when removing block from graph
  - fix: memory data loop
  - fix: memory data loop
  - fix: throttle refresh of overview widget
27.08.2016 - v1.3.1.320
  - add: make sub streams dynamic allocated entities
26.08.2016 - v1.3.1.318
  - fix: stop of histogram for maximum persistance
  - fix: waterfall mapping for nearest sample
24.08.2016 - v1.3.1.312
  - add: optional AM/FM decoding path through software
  - fix: reset average trace when removed/added
  - fix: workaround for switching from 224 to 112 FFT size with 44MHz span
23.08.2016 - v1.3.1.307
  - fix: sample time calculation for small spans
05.08.2016 - v1.3.1.231
  - fix: Changed the logo in About dialog.
  - fix: ScanSteps setting wasn't saved and reloaded properly
01.07.2016 - v1.3.1.67
  - fix: Missing x-Axis description in 2D Waterfall

Updated on 06.09.2023 to v2.2.6.13899

Hello, how to get the new version? Thanks

It is available via the regular download link. Unfortunately the website for some reason still displays the old version number, but the link points to the new version.

jakov has reacted to this post.